Oceanic VEO 1.0 Manuale utente
QUICK START GUIDE
Read & Understand the Operating Manual and Safety & Reference Manual
VEO 1.0
B
SURFACE
MAIN
Activation
Diagnostics
Max Depth,
EDT
ALT 1
(Last) ALT 2 ALT 3
(if Nitrox)
Elev, Temp O2%,
PO2, FO2
to Main
< 2s
LOG
Preview
FLY/SAT
PLAN
Lead-in
SET FO2
SET FO2
DEFAULT
SET WET
Activation
SET PO2
Alarm
SET
UNITS
SET DEEP
STOP
SET
ALGO
SET HR
FORMAT
SN
SET
TIME
to Main
2s
LOG 1
Data
LOG 2
Data
LOG 3
Data
Depths/
Times
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
2s
< 2s
< 2s
< 2s
< 2s
< 2s
< 2s
< 2s
< 2s
< 2s
< 2s
< 2s
2s 2s
< 2s
< 2s
< 2s
Previous
Dive’s
Preview
SI, TAT, Max
Depth, EDT
Elev, Temp
end O2%,
max PO2,
FO2 set
step up
2s
to
Lead-in
#, Date,
Time in
Air, 21 to
50%
2s
save, to
next
step up
On/Off
2s
save, to
next
toggle
1.20 to
1.60 ATA
2s
save, to
next
toggle
On/Off
2s
save, to
next
toggle
English/
Metric
2s save, to
next
toggle
On/Off 2s save, to
next
toggle
PZ+/
DSAT
2s save, to
next
toggle
12/24 2s save, to
next
toggle
hr:min 2s save, to
next
step up
< 2s < 2s < 2s
BUTTON:
• < 2s means quick press/release
• 2s means press/hold 2 seconds
INCLUDED IN THE PACKAGE:
• VEO 1.0, CR2450 Battery installed
• CD (Operating Manual)
Quick Start Guide
AVAILABLE AS OPTION:
• Lens Cover
POWER SUPPLY
(refer to Reference section of the Operating Manual)
• VEO 1.0 - (1) 3 volt type CR2450 Lithium Battery, 560 mAhr
• Shelf Life - up to 5 years
• Use Life -100 hive hours if (1) 1 hour dive per day up to 300 dive hours if (3) 1 hour
dives per day
• Replace the Battery prior to dive trips and vacations when multiple days of diving
are planned.
• Calculations and settings retained after Battery replacement.
• Dispose of battery according to local regulations that apply to Lithium cells.
EU (EUROPEAN UNION) DIRECTIVES
• The VEO 1.0 is in compliance with the essential safety requirements of EU EMC
directive 89/336/EEC and PPE directive 89/686/EEC.
• EU standards comformity certied by SGS United Kingdom Ltd, Weston -
super - Mare, BS22 6WA, UK, Notied Body No. 0120.
• The VEO 1.0 is designed to comply with EN13319:2000 Diving accessories - Depth
gauges and combined depth and time measurement devices - Functional and safety
requirements, test methods. Any information on decompression obligation displayed
by equipment covered by this standard is explicitly excluded from its scope.
© 2002 Design, 2009
Doc. No. 12-5208-r01 (11/3/09)
NORM (Dive)
ALT 1
ALT 2
O2%, FO2,
PO2
Time, Temp
DS Preview
Deep Stop Safety Stop
NORM (Surface)
at 2 ft (0.6 M)
for 1 sec
at 5 ft (1.5 M)
for 5 sec
at 1/2 Max Depth for
2 min after Depths
> 80 FT (24 M)
to Main 5s
B
No Deco Main
at 15 FT (4.5 M) for
3 min after Depths
> 30 FT (9 M)
< 2s
2s
< 2s
ACTIVATION
Press and release the button. The display comes full on displaying all segments then a
countdown sequence, then the Surface Main screen.
MAINTENANCE
(refer to the Reference section of the Operating Manual)
• Rinse thoroughly with fresh water after activities in salt water.
• Annually >> take the VEO 1.0 to an Authorized Oceanic Dealer for inspection.
Replace the Battery prior to dive trips and vacations when multiples days of diving are
planned.
SPECIFICATIONS
(refer to the General section of the Operating Manual)
• Max Operating Depth = 400 FT (120 M)
Depth Accuracy - +/- 1% full scale
• Time Accuracy - +/- 1 second per day
• Dive Mode - entered at 5 FT (1.5 M) for 5 seconds.
• Post dive Surface Mode after 10 minutes on surface following ascent to 2 FT (0.6
M) for 1 second.
• Repetitive Dive - NORM (or GAUG) after 10 minute post dive SI, FREE after 1 minute
post dive SI.
• Altitude Adjustments (of Ni-O2 calculations & depth calibration) - begin at 3,001
feet (916 meters) elevation, continues up to max operating elevation of 14,000 feet
(4,270 meters).
• Operating Temperature (in air) - 20 to 140 F (- 6 to 60 C)
• Operating Temperature (in water) - 28 to 95 F (- 2 to 35 C)
Altri manuali per VEO 1.0
1
Altri manuali Oceanic Orologio
