oConnor C1243-0001 Manuale utente
User Guide
O-Box WM Set
C1243-0001
User Guide
WARNING!
If the sunshade is damaged or torn, DO NOT touch the damaged
surfaces. Dispose of safely.
ŸDO NOT attempt to move the camera by pulling the flags.
ŸDO NOT lift the O-Box WM by the flags, the flag brackets or the O-Grips.
ŸDO NOT overload the O-Box WM as a carrying or rigging point.
ŸEnsure the lock levers on the flag brackets and the 3-system rod bridge
are firmly tightened.
ŸEnsure screws are sufficiently tight when attaching rod brackets or studio
adapter brackets.
ŸNEVER use solvents or oil-based cleaners to clean the O-Box WM.
Use mild detergents only. Wipe surfaces with a damp, lint-free cloth.
ŸALWAYS use genuine OConnor parts and accessories with the O-Box WM.
ŸWhen using the O-Box WM as a clamp-on mattebox and/or handheld mount,
DO NOT subject the lens to forces that may damage it.
Particular care should be taken when using still photography lenses intended
for autofocus photography.
!
Copyright © 2011 The Vitec Group plc
All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including,
but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing from the Vitec Group plc.
Caution
!
3
Contents
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
The O-Box Wide Mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
In the box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Assembly
assembling the filter frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
assembling the flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
assembling the clamp rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
assembling the bellows ring (donut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
mounting onto camera rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setup options
Cine Follow Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
O-Grips Handgrip System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OConnor Offices worldwide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
The O-Box Wide Mini
4
Congratulations on the purchase of your new OConnor O-Box WM Set!
We want you to get the most from your new O-Box WM compact mattebox and therefore encourage
you to read this user guide to familiarize yourself with its many features, some of which may be new
to you. It also covers essential safety information.
Features and benefits of your new O-Box WM
The O-Box Wide Mini, the first mattebox from OConnor, offers a host of innovative features:
Ÿhighly shock-resistant and durable design
Ÿlarge rear clamping interface for lens diameters up to 150 mm
Ÿclamp rings featuring collet design for high compressibility with no light leaks
Ÿutility bar or “cheese stick” with provisions for attachment of O-Grips and other
mounting/rigging hardware such as ringlights, top lights, or monitors
Ÿinterface to O-Grips 3-system rod bridge to save rod space in studio configurations
Ÿeasy serviceability
Special features
The OConnor O-Box WM is a compact, two-stage mattebox designed around the 16:9 wide-angle
format. The O-Box WM can be combined with an OConnor Follow Focus, up to six O-Grips and up
to three filters, offering highly flexible configurability and many diverse filtering possibilities in a very
compact package.
5
O-Box WM Set (C1243-0001)
O-Box WM
Weight (incl. top flag bracket, LWS rod bracket) . . . . . . . . . . . . . . . . . . . . 0.7 kg (1.54 lbs)
Dimensions (HWD) . . . . . . . . . . . . . . . . . . . . . . . 210 x 242 x 84 mm (8.3 x 9.5 x 3.3 in.)
Height, incl. bottom flag bracket . . . . . . . . . . . . 211 x 242 x 84 mm (8.3 x 9.5 x 3.3 in.)
Width, incl. side flag brackets . . . . . . . . . . . . . 210 x 300 x 84 mm (8.3 x 11.8 x 3.3 in.)
Depth, incl. bellows ring . . . . . . . . . . . . . . . . . 210 x 242 x 106 mm (8.3 x 9.5 x 4.2 in.)
Maximum lens diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø150 mm (Ø 5.9 in.)
Top or bottom flag
Dimensions (width at widest point) . . . . . . . . . . . . . . . . . . . . 166 x 337 mm (6.5 x 13.3 in.)
Filter frames (sets of 2)
to hold square filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 x 4 in.
to hold rectangular filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 x 5.65 in.
Overall dimensions (per frame) . . . . . . . . . . . . . . . . . . . . . . . . . 151 x 145 mm (6 x 5.7 in.)
LWS rod bracket
for standard camera rods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø15 mm (0.6 in.)
Specifications are subject to change without notice
Specifications
6
In the box
Filter Frames 4"x 4"
Set of 2
O-Box WM Set
C1243-0001
Top or Bottom Flag
Filter Frames 4"x 5.65"
Set of 2
O-Box Wide Mini
7
Side Flags (Wings)
Set of 2
C1243-1122
Accessories
Clamp Rings
C1243-1123
C1243-1124
C1243-1125
C1243-1126
Side Flag Brackets
Set of 2
C1243-1121
Part no. Clamp Ring size
(for standard lenses)
C1243-1123
C1243-1124
C1243-1125
C1243-1126
150 to 114 mm
150 to 110 mm
150 to 95 mm
150 to 80 mm
Studio Adapters
C1243-1118 (19 mm)
C1243-1119 (15 mm)
(for use with rod bridge)
8
Accessories
Reduction Rings
C1243-2171
C1243-2172
C1243-2173
Bellows Ring
(Donut)
C1243-1117
Part no. Reduction Ring size
(for use with bellows ring)
C1243-2171
C1243-2172
C1243-2173
114 to 110 mm
114 to 95 mm
114 to 80 mm
O-Grips 3-System
Rod Bridge
C1244-1002 Matching OConnor accessories:
Cine Follow Focus CFF-1 Set
C1241-0001
O-Grips Handgrip System
C1244-1001 (single module)
Bottom Flag Bracket Set
C1243-1127 (flag req.)
9
Components
10
top or bottom flag
sunshade
(mattebox)
bellows ring or “donut”
(optional)
lock lever
knurled flag screws
(hollow)
top or bottom bracket
(with utility bar or “cheese stick”)
fixing screw
(for rotatable stage) LWS rod bracket
filter stages
(front / rear)
side flag
(asymmetric)
rear clamping
interface
(Ø150 mm)
side flag bracket
O-Grip
mounting point
flag axle
Indice
Altri manuali oConnor Accessori per fotocamere
