OEM Tools 24385 Manuale di servizio

UNPACKING

After unpacking unit, inspect

carefully for any damage that

may have occurred during transit.

Check for loose, missing, or

damaged parts. If any damage

is observed, a shipping damage

claim must be ﬁled with carrier.

Do not use Video Borescope

if broken, bent, cracked or

damaged parts (including labels)

are noted. Any Video Borescope

that appears damaged in any

way, operates abnormally or is

missing parts should be removed

from service immediately. If you

suspect that the Video Borescope

was subjected to a shock load (a

load that was dropped suddenly,

unexpectedly, etc.) immediately

discontinue use until it has been

checked by a factory authorized

service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect

yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions

could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

The following safety information is provided as guidelines to help you operate your Video Borescope under the

safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or

safe handling instructions are not known or not followed. The following safety instructions are to provide the

user with the information necessary for safe use and operation. Please read and retain these instructions for the

continued safe use of your service system. Failure to follow instructions listed below may result in serious injury.

In addition, make certain that anyone that uses the equipment understands and follows these safety instructions

as well.

Operating Instructions and Parts Manual 24385

07/14

2014 ©OEM-TOOLS

FOR CUSTOMER SERVICE

Technical Question?

CALL 1-866-458-2472

[email protected]

USB VIDEO BORESCOPE

WARNING

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

Thank you very much for choosing an OEMTOOLS

Product!

For future reference, please complete the owner’s

record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is

important that you read the entire manual to become

familiar with this product before you begin using it.

This machine is designed for certain applications

only. OEMTOOLS cannot be responsible for issues

arising from modiﬁcation. We strongly recommend

this machine is not modiﬁed and/or used for

any application other than that for which it was

designed. If you have any questions relative to a

particular application, DO NOT use the machine until

you have ﬁrst contacted OEMTOOLS to determine if

it can or should be performed on the product.

For technical questions please call 1-866-458-2472.

IMPORTANT INSTRUCTIONS

AND SAFETY RULES

1. Know your tool. Read this manual carefully. Learn

the tool’s applications and limitations, as well as,

potential hazards speciﬁc to it.

2. Keep work area clean and well lit. Cluttered or dark

work areas invite accidents.

3. Keep children away. All children should be kept

away from the work area. Never let a child handle

a tool without strict adult supervision.

4. Do not operate this tool if under the inﬂuence

of alcohol or drugs. Read warning labels on

prescriptions to determine if your judgment or

reﬂexes are impaired while taking drugs. If there is

any doubt, do not attempt to operate.

5. Use safety equipment. Eye protection should

be worn at all times when operating this tool.

Use ANSI approved safety glasses. Everyday

eyeglasses are NOT safety glasses. Dust mask,

non-skid safety shoes, hard hat or hearing

protection should be used in appropriate

conditions.

6. Wear proper apparel. Loose clothing, gloves, neck-

ties, rings, bracelets or other jewelry may present a

potential hazard when operating this tool. Keep all

apparel clear of the tool.

7. Don’t overreach. Keep proper footing and balance

at all times when operating this tool.

8. Check for damage. Check your tool regularly. If

part of the tool is damaged it should be carefully

inspected to make sure that it can perform its

intended function correctly. If in doubt, the part

should be repaired. Refer all servicing to a qualiﬁed

technician. Consult your dealer for advice.

9. Keep away from ﬂammables. Do not attempt

to operate this tool near ﬂammable materials

or combustibles. Failure to comply may cause

serious injury or death.

10. Store idle tools out of the reach of children and

untrained persons. Tools may be dangerous in the

hands of untrained users.

• Maintain tools with care.

• Keep tools dry and clean.

• Properly maintained tools are less likely to bind and

are easier to control. Do not use a damaged tool. Tag

damaged tools “Do not use” until repaired.

• Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may

affect the tool’s operation.

• If damaged, have the tool serviced before using. Many

accidents are caused by poorly maintained tools.

• Use only accessories that are recommended by the

manufacturer for your model. Accessories that may

be suitable for one tool may become hazardous when

used on another tool.

• Tool service must be performed only by qualiﬁed

repair personnel. Service or maintenance performed

by unqualiﬁed personnel could result in a risk of injury.

• When servicing a tool, use only identical replacement

parts. Use of unauthorized parts or failure to follow

maintenance instructions may create a risk of injury.

• Maintain a safe working environment. Keep the work

area well lit. Make sure there is adequate surrounding

workspace. Keep the work area free of obstructions,

grease, oil, trash, and other debris. Do not use this

product in a damp or wet location.

• Maintain labels and nameplates on this product.

These carry important information. If unreadable or

missing, contact OEM for a replacement.

• Keep the handle dry, clean, and free from brake ﬂuid,

oil, and grease.

• Before use, read and understand all warnings, safety

precautions, and instructions as outlined in the

vehicle manufacturer’s service manual. It is beyond

07/14

2014 ©OEM-TOOLS

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

the scope of this manual to properly describe the

correct procedure and test data for each vehicle.

• Always perform vehicle service in a properly ventilated

area. Never run an engine without proper ventilation

for its exhaust. Stop work and take necessary steps

to improve ventilation in the work area if you develop

momentary eye, nose, or throat irritation as this

indicates inadequate ventilation.

• Engine parts that are in motion and unexpected

movement of a vehicle can injure or kill. When working

near moving engine parts, wear snug ﬁt clothing and

keep hands and ﬁngers away from moving parts.

Keep hoses and tools clear of moving parts. Always

stay clear of moving engine parts. Hoses and tools

can be thrown through the air if not kept clear of

moving engine parts. The unexpected movement of

a vehicle can injure or kill. When working on vehicles

always set the parking brake or block the wheels.

• Avoid accidental ﬁre and/or explosion. Do not smoke

near engine fuel and battery components.

• The warnings, precautions, and instructions discussed

in this manual cannot cover all possible conditions

and situations that may occur. The operator must

understand that common sense and caution are

factors which cannot be built into this product, but

must be supplied by the operator.

• For safety purposes and the prevention of damage

to expensive components it is advised that the user

have an understanding of basic automotive repair and

a working knowledge of automotive systems.

• We believe the information contained herein to be

reliable. However, general technical information is

given by us without charge and the user shall employ

such information at his own discretion and risk. We

assume no responsibility for results or damages

incurred from the use of such information in whole or in

part. Always refer to speciﬁc instructions and technical

information supplied by vehicle manufacturer.

• The manufacturer declines any and all responsibility

for damage to vehicles or components if said damage

is the result of unskillful handling by the operator or of

failure to observe the basic safety rules set forth in the

instruction manual.

DISPOSAL

At the end of the useful life of the Video Borescope,

dispose of the components according to all state,

federal, and local regulations

PURPOSE

This digital Video Borescope is an ideal tool for

inspecting difﬁcult-to-reach areas normally hidden

from sight. The ergonomic USB Video Borescope

features a camera probe and USB connection to view

images and video on your computer. The multipurpose

Borescope is suitable for internal inspection of cylinder

bores and vehicle compartments/components. Ideal

for the inspection of engines, machinery, buildings and

infrastructure.

07/14

2014 ©OEM-TOOLS

Digital Image Sensor 1/6” CMOS

Resolution 640 (H) x 480 (V)

Viewing Angle 56°

Focus 6 cm

Input Interface USB 2.0

S/N Ratio 46 dB

White Balance Auto

Picture Format JPEG, BMP

System Requirements

Windows® XP/Vista/

Windows 7/Mac OS,

USB port

IP Rating IP66 (camera + ﬂexible

tube)

Power Supply 5 VDC via USB port

Dimensions

Camera 14 x 72 mm,

Flexible tube 54 cm,

USB cable 200cm

Operating Temperature 32°F - 113°F

PRODUCT SPECIFICATIONS

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

Figure Description

1 LED brightness control

2 Snapshot button

3 Handle

4 Watertight Flexible Shaft (60 cm)

5 Camera head with LEDs

6 Accessory tools: hook, magnet

NOTE

Not all components of the Video Borescope are

replacement items, but are illustrated as a convenient

reference for location and position in the assembly

sequence.

ATTACHING TOOLS

Slide the plastic clamp of the tool over the narrow part

of the camera head until it snaps into place.

Attach the magnetic top to the camera to pick up small

metal pieces from difﬁcult to reach locations.

Attach the hook to retract wires or other small objects.

(6)

07/14

2014 ©OEM-TOOLS

Always wear safety glasses and gloves!

OPERATING INSTRUCTIONS

• Never insert probe into a space known or suspected to contain live electric wiring.

• The Video Borescope is intended for industrial applications only. Do not use it for personal or medical use in any

way.

• Never insert an attached probe into any ﬂammable gas or liquid including in any storage container or fuel tank

designed to store ﬂammable gas or liquid.

• Do Not disassemble the instrument. Doing so creates a potentially fatal electrical hazard (and voids the warranty

as well).

• Do Not expose the tool to rain or wet conditions. Water entering the tool will increase the risk of electric shock.

• Keep cord away from heat, oil, sharp edges or moving parts.

WARNING

(1)

(2)

(3)

(4)

(5)

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

07/14

2014 ©OEM-TOOLS

BASIC OPERATION

IMPORTANT: Always wear safety eye protection to protect your eyes against dirt and

other objects. Follow operation instructions to reduce the risk of injury from electric

shock, entanglement and other causes.

FOR WALLS: For inspecting the inside walls, be sure to shut off the circuit breaker to

the whole house before using the Video Borescope.

FOR PIPES: If you suspect a metal pipe could contain an electric charge, have a

qualiﬁed electrician to check the pipe before using.

FOR AUTOMOBILES: Be sure the automobile is not running during inspection. Metal

and liquid under the hood may be hot. Don’t get oil or gas on the imager head.

Set up the Video Borescope and work area according to these procedures to reduce the risk of injury from

electric shock, entanglement, and other causes and prevent Video Borescope damage.

1. Check work area for:

a. Sufﬁcient lighting.

b. Do not work in area until ﬂammable sources have been identiﬁed and corrected. The Video Borescope is

not explosion proof and can cause sparks.

c. Do not use the Video Borescope while standing in water.

2. Check the area and determine if the Video Borescope is the correct Video

Borescope for the job.

a. Check the access points to the area.

b. Check if there is any electric power supplied to the area to be inspected.

c. Check if the any liquids will be occurred during the inspection. The Image head and cable were

waterproof to a depth of 10’. Greater depths may cause leakage into the imager head and cable and

cause electric shock or damage the Video Borescope. The display unit is not waterproof and should not

be exposed to wet conditions.

d. Check if any chemicals are present, especially in the case of drains. Chemicals may damage the Video

Borescope.

e. Check the temperature of the area. The working temperature of the Video Borescope is between 32°F

and 113°F.

f. Check if any moving parts are present in the area.

3. Make sure the Video Borescope has been properly inspected.

4. Install the correct accessories for use in the appropriate application.

NOTE: When in operation, the cable can be bent into a certain shape. (Do not kink the

cable) This may help you operate the cable in conﬁned areas.

Never insert the camera in energized/operational machines or equipment.

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

07/14

2014 ©OEM-TOOLS

OPERATING PRECAUTIONS

1. Use the Video Borescope only as directed. Do not operate the Video Borescope unless the user’s manual

has been read thoroughly and proper training has been completed.

2. The Video Borescope is not waterproof. The imager head and cable are waterproof, but not acid-proof or

ﬁreproof. Avoid submerging the imager head and cable into corrosive, oily places and be sure to keep the

imager head and cable away from high temperature objects.

3. Do not use excessive force to insert or withdraw the imager head and cable. This may result in damage to

the Video Borescope or inspection area.

4. Do not use the imager head and cable to move items, clear pathways or clogged areas.

5. Do not eat or smoke while operating the Video Borescope. Use hot, soapy water to wash hands and other

body parts exposed to drain contents after using the Video Borescope to inspect drains and other areas that

may contain chemicals or bacteria, which will help prevent contamination with toxic or infectious material.

6. When the inspection is completed, carefully withdraw the imager head and cable from the inspection area.

7. Maintain the Video Borescope with care. A properly maintained Video Borescope is less likely to cause

injury.

8. Do not drop the Video Borescope. If the Video Borescope is dropped accidently, check for damage and any

other condition that may affect its operation.

9. Dry your hands before operating the Video Borescope or charging the battery.

10. Use appropriate personal protective equipment while handling and using the Video Borescope. Appropriate

personal protective equipment always includes safety glasses and gloves, and may include latex or rubber

gloves, face shields, goggles, protective clothing, respirators and steel toed footwear.

11. Protect against excessive heat. Keep the Video Borescope away from heat sources such as radiators, stoves

or others that produce heat. Do not use the Video Borescope near moving machinery or areas where the

temperature will exceed 113°F.

12. Store the Video Borescope and all cables in a locked area out of the reach of children and people unfamiliar

with Video Borescope.

SETUP INSTRUCTIONS

Installing the Driver on Windows XP or Earlier

On Windows XP® operating system (or earlier), proceed as follows:

1. 1. Connect the camera to a free USB 2.0 port on your pc.

Note: Make sure to use USB 2.0 or higher. Correct operation is not guaranteed with

USB 1.1.

2. Windows automatically recognizes the device and installs the driver. Depending on the settings, Windows

may (not) display the message “Your new hardware is installed and ready for use”. Your camera is now ready

for use.

Installing the Driver on Windows Vista / 7

For Windows Vista / 7, proceed as follows:

1. 1. Connect the camera to a free USB 2.0 port on your pc.

Note: Make sure to use USB 2.0 or higher. Correct operation is not guaranteed with

USB 1.1.

2. Insert the included CD-ROM in your pc.

3. Double-click the setup icon to start installation.

4. Follow the instructions of the installation Wizard.

5. Double-click the Amcap icon on your desktop to run the software. The installation is now complete and your

camera is ready for use.

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

07/14

USE

Never insert the camera in energized/operational machines or equipment.

Windows XP1

1. Connect the camera to a free USB 2.0 port on your pc.

2. Open My Computer and look for the “USB Video Device” to see live images.

3. Insert the camera head into the space you want to inspect.

Note: The Watertight Flexible Shaft should easily maneuver into position. Do not

apply force.

4. Turn the LED brightness button to adjust the intensity of the LEDs on the camera head.

5. Press the snapshot button to take a photo. The list of photos appears under the camera image. You can

copy, delete, or view the photos from here.

Windows Vista / 7

1. Connect the camera to a free USB 2.0 port on your pc.

2. Double-click the Amcap icon on your desktop to run the software.

3. In the Options menu, select Preview to see live images.

4. If more than one USB camera is connected to the pc, select the desired camera in the Devices menu.

5. Insert the camera head into the space you want to inspect.

Note: The Watertight Flexible Shaft should easily maneuver into position. Do not

apply force.

6. Turn the LED brightness button to adjust the intensity of the LEDs on the camera head.

7. To capture a video ﬁle, ﬁrst set the default folder and ﬁle name: choose File > Set Capture File.

8. Choose Capture > Start Capture and click OK to conﬁrm. The pc now starts capturing the video ﬁle.

9. To stop, choose Capture > Stop Capture.

10. Press the snapshot button to take a photo. The photo appears in a separate window. To save the photo,

choose File > Save.

11. When ﬁnished, close the Amcap program and unplug the camera from the USB port.

All registered trademarks and trade names are properties of their respective owners and are used only for the

clariﬁcation of the compatibility of our products with the products of the different manufacturers. Windows,

Windows XP, Windows Vista, Windows 7, are registered trademarks of Microsoft Corporation in the United States

and other countries

MAINTENANCE

1. Unplug the device from the USB port.

2. Wipe the device with a lint-free, soft anti-static cloth. Do not use abrasive solutions or solvents.

3. Clean the Watertight Flexible Shaft and camera with clean water after each use and let it dry before storing

it.

4. Clean any oil, grease or dirt from the Video Borescope, especially on the buttons and ports. This helps

prevent the Video Borescope from slipping from your hands.

5. Inspect the imager head lens for condensation. To avoid damaging the Video Borescope, do not use the

Video Borescope if condensation forms inside the imager head. Let the water evaporate before using again.

Operating Instructions and Parts Manual 24385

USB VIDEO BORESCOPE

07/14

OEMTOOLS™ ONE YEAR LIMITED WARRANTY

Please read the following carefully

OEM and/or it’s distributors have provided the parts list and assembly diagram as a reference only. Neither OEM

and/or it’s distributors make any representation or warranty of any kind to the buyer and/or user of this tool that

he or she is qualiﬁed to do any repairs or replace any parts of this product. OEM and it’s distributors expressly

state that all repairs or parts replacement should be done by certiﬁed or licensed technicians. The buyer

assumes all risk and liability arising out of his or her repairs or parts replacement to the original production.

From one year from the original purchase date of this product, OEMTOOLS will warranty this product. If you

ﬁnd any defect in material or workmanship, through normal usage, return it to the place of purchase or to

OEMTOOLS for repair or replacement at our discretion. In order to obtain this service send your tool and proof

of purchase, transportation pre-paid, to OEMTOOLS Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118.

We will not be responsible for lost or damaged goods during transportation, please insure your package. If

our inspection veriﬁes the defect, we will either repair or replace the product at our election, or we may elect

to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return

repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes

not within the scope of our warranty, then you must bear the cost of returning the product.

OEMTOOLS does not provide warranty for products labeled other than OEM or OEMTOOLS. OEMTOOLS will

not provide any warranty for products subjected to abnormal use. Abnormal use includes, but is not limited to,

abuse, accident, alteration, neglect, and unauthorized or unreasonable use or repairs. This warranty does not

cover bits, blades, ﬁles, batteries, or calibration. We recommend that you maintain your tools and sharpen or

replace blades, bits, ﬁles, and batteries as necessary. OEMTOOLS reserves the right to makes any changes in

construction or design at any time without any obligation in incorporating such changes to tools or equipment

previously sold.

OEMTOOLS makes every effort to assure that its products meet high quality and durability standards, and

warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of one year from the date of purchase. This warranty does not apply to damage due directly or indirectly

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear or to lack of maintenance.

We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or

consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS

WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS. This warranty gives you speciﬁc legal rights, and you may

also have other rights, which vary from state to state.

3580 E. Raines Road, Suite 3, Memphis, TN 38118

Tel: 1-866-458-2472

www.oem-tools.com

Indice

Altri manuali OEM Tools Strumento analitico

OEM Tools

OEM Tools 24383 Manuale di servizio

Manuali Strumento analitico popolari di altre marche

Cocraft

Cocraft NLT04 Manuale utente

M&C

M&C GENTWO PMA1000 Manuale utente

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Manuale utente

CONDTROL

CONDTROL XP4 PRO Manuale utente

Extech Instruments

Extech Instruments BR200 Manuale utente

Dewetron

Dewetron DEWE-30-16 Manuale del prodotto

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Istruzioni per l'installazione e il funzionamento

RIDGID

RIDGID SeeSnake Compact Manuale utente

Teledyne

Teledyne 3000PA Manuale utente

YDLIDAR

YDLIDAR TIA Manuale utente

Olympus

Olympus IPLEX FX Series Manuale utente

Bosch

Bosch GLM 50 C Professional Manuale utente

Reflecta

Reflecta DigiEndoscope Manuale utente

Chinavision

Chinavision CVACZ-G696 Istruzioni per il montaggio

Fuji Electric

Fuji Electric ZKMA Manuale utente

Teledyne

Teledyne 3300TA Manuale utente

VOLTCRAFT

VOLTCRAFT IC-100HD Manuale utente

RIDGID

RIDGID micro CA-25 Manuale utente