Ogawa STUDIO TREADMILL Manuale utente
USER MANUAL
OG0021
www.ogawaworld.net.ph
Important Safety Precautions................................................................... 2
Assembly Instructions.................................................................................... 3
Folding & Unfolding Instructions............................................................ 6
Grounding Methods........................................................................................ 7
Functional Instructions................................................................................. 8
Getting Started Guide.................................................................................... 43
Safety Exercises................................................................................................... 44
Warm-up Exercises........................................................................................... 45
Maintenance Instructions............................................................................ 46
Belt Adjustment................................................................................................. 47
Exploded Drawing............................................................................................ 48
Parts List.................................................................................................................. 49
Product Specifications................................................................................... 51
TABLE OF CONTENTS
Carefully read and understand the user manual before assembly and use of the OGAWA Studio Treadmill.
Keep the manual for future reference.
1
www.ogawaworld.net.ph
IMPORTANT SAFETY PRECAUTIONS
Before beginning, this or any exercise program, consult your physician first. This is especially important
for individuals over the age of 35 or persons with pre-existing health problems. Read all instructions
before using the OGAWA Studio Treadmill. OGAWA assumes no responsibility for personal injury or
property damage obtained by or using this machine.
1. When using the OGAWA Studio Treadmill, always attach the safety pull pin rope to your clothes.
2. Use the OGAWA Studio Treadmill only for its intended use as described in this manual. DO NOT use
any other accessories not recommended by the manufacturer. This could compromise the safety
of this machine and will void the warranty.
3. Position the OGAWA Studio Treadmill on a clear, level surface and away from water and moisture.
Do not place the machine on thick carpet as it may interfere with proper ventilation.
4. To prevent injury, stand on the foot rails before starting the OGAWA Studio Treadmill. After turning
the power on and adjusting the speed control there may be a pause before the walking belt begins
to move, always stand on the foot rails on the sides of the frame until the belt is moving.
5. Always hold the handrails when initially walking or running on the OGAWA Studio Treadmill, until
you familiarize yourself with the machine.
6. This machine contains moving parts, do not wear loose clothing or jewelry. Always wear
appropriate exercise clothes and rubber-soled athletic shoes.
7. The OGAWA Studio Treadmill is only recommended for adults.
8. If the OGAWA Studio Treadmill should suddenly increase in speed due to electronics failure or the
speed inadvertently increased, the treadmill will come to a sudden stop when the safety pull pin is
disengaged from the console.
9. Before each use, examine this machine for damage to power cord, power receptacle, loose parts, or
signs of wear. Do not use if found in this condition. Contact us for repair information. Keep power
cord away from heat source and hot surfaces.
10. The power cord of the motorized treadmill is customized. If the power cord is damaged, please
contact us directly.
11. When the OGAWA Studio Treadmill is not being used, the power cord should be unplugged, and
the safety pull pin should be removed.
WARNING:
Note the following precautions before assembling or operating this machine:
2
Installation tools
6# Wrench 6mm 1pc、Wrench S15*S13*S14*∮5*70 1pc
www.ogawaworld.net.ph
ASSEMBLY INSTRUCTIONS
WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS:
No. Description Spec QTY
01 Main Frame 1
35 Computer 1
04 Left upright 1
05 Right upright 1
28/29 L&R upright 1/1
Decorative cover
52 Bolt M8*20 4
83 Wrench 6mm 1
No. Description Spec QTY
56 Bolt M8*38 2
58 Cap M8 2
60 Flat washer M8 2
64 Screw ST4 6
2*16
51 Bolt M8*60 8
82 Cross wrench 1
84 Safety Lock 1
S15*S13*S14
*∮5*70
01 35 04 05
2829 52 53 58
60 64 51 82
83 84
3
www.ogawaworld.net.ph
Open the carton,take out the above materials
from the carton,and put the main frame on
the ground. Run the upper control wire（74）
into the right upright（05).
STEP 1:FIGURE 1
FIGURE 2
FIGURE 3
Align the L&R upright（04）/（05）with the
bottom frame（03）holes and then load the
bolts（51）and bolts（52）as shown in the figure
2.
STEP 2:
Align the upper computer frame（35）with
the L&R upright（04）/（05）,Load bolts（56）flat
washers（60）nuts（58）and bolts（52）and lock
them,as shown in the figure 3.
STEP 3:
03
01
05
74
52
52
51
51
04
05
03
01
35
74
77
60
56
05
58
60
52
56
04
58
4
FIGURE 4
FIGURE 5
FIGURE 6
www.ogawaworld.net.ph
Put the L&R upright decorative cover（28)（29）
into the L&R upright（04）（ 05）and bottom
frame(03). Align the holes,install and lock the
screw（64)，as shown in the figure 4.
STEP 4:
:Place the safety lock（84）in the yellow
rectangle of the computer assembly in the
arrow as shown in figure 5.
STEP 5:
After the installation, please check whether
there is any omission. Make sure all parts are
locked according to the instructions
before switching on the power supply. Refer
to the following instructions carefully for
treadmill operation.
NOTE
03
64
64
64
28
01
64
64
64
29
05
35
84
5
www.ogawaworld.net.ph
FOLDING INSTRUCTION
UNFOLDING INSTRUCTION
Use proper safety precautions and
lifting techniques. Lift the walking deck
fully upward and engage the pneumatic
cylinder. Be sure that the pneumatic
cylinder is correctly locked in place.
Slightly push the walking deck forward
toward the console. With your left foot
lightly push the top part of the
pneumatic cylinder forward until the
locking tube releases and you can pull
the walking deck away from the console.
UNLOCKED
6
www.ogawaworld.net.ph
DANGER
GROUNDING METHODS
This product must be grounded. If it should malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded.
Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 220-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Make that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with this product.
7
www.ogawaworld.net.ph
FUNCTIONAL SPECIFICATIONS
No. Icon Functional Specifications
Slope reduction button：Adjustable range 0-20 segments
Its adjustment amplitude value is 1 section/time, when the
continuous hold more than 0.5 seconds, automatic continuous
decline.
Slope up button：Adjustable range 0-20 segments
Its adjustment amplitude value is 1 section/time, when the
continuous hold more than 0.5 seconds, automatic continuous
decline.
Deceleration button：Adjustable range 1.0-20km/h
Its adjustment amplitude value is 0.1 km/time, when the
continuous hold more than 0.5 seconds, automatic continuous
decline.
Acceleration button：Adjustable range 1.0-20km/h
Its adjustment amplitude value is 0.1 km/time, when the
continuous hold more than 0.5 seconds, automatic continuous
decline.
“Incline：3、6、9、12” Slope shortcut button：
The slope can be quickly set.
1. OPERATION INSTRUCTIONS OF PANEL BUTTONS
1
1
2
2
3
3
4
4
678
5
5
8
www.ogawaworld.net.ph
No. Description Functional Specifications
“HOME” button
Can return to the home screen from any screen (except the home
screen)
Back button:
You can return to the previous interface
“SPEED：3、6、9、12”Speed shortcut button
Speed can be set quickly.
OPERATION DURING MOVEMENT
• To ensure the normal operation of the device, don’t download on the device；
• Clear the cache periodically；
• Try not to use third-party apps. When you exit a third-party application, use the return key first；
• WIFI restriction: This product cannot be connected, and WIFI web page verification is required
• Press the stop button during the running of the treadmill to slow down the treadmill and to stop
running.
• When the user holds the heart rate grip with both hands, the heart rate data will be displayed for
about 5 seconds.
• The key to running a treadmill is proper warm up and cool down after exercise.
• You usually start with a five-minute walk followed by a brisk walk or run and finish with another
five-minute walk.
• The setting of the slope during the movement
Usually about 30 minutes of exercise will have a better exercise effect. For ordinary body builders
each running time should not exceed more than 60 minutes. Longer exercise duration may cause
excessive fatigue.
Explanation: When running, set a slower pace to walk slowly for 5 minutes first, which is roughly
equivalent to the state when walking, and then gradually increase the speed of the treadmill,
When the speed is increased to "5" or ="6"，You are in a state of brisk walking or jogging, and your
body has basically adapted to it. Set it to a slower pace again and walk slowly for 5 minutes as a
relaxation arrangement, Let the body gradually adapt in the process of exercise. This takes about
30 minutes at a time.
（Some models do not have the lift function. This function is for reference only）
If need to set slope, set first when starting to run is "0". Do 5 minutes of slow walk, after waiting for
the body to adapt, raise slope gradually accordingly to also consume more calories.
Larger slope does not suit long running exercise.
2. MATTERS NEEDING ATTENTION
6
7
8
9
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Ogawa Tapis roulant
