OHAUS Explorer E1F110 Manuale utente

Ohaus Explorer

Manufacturer: Ohaus

Product Range: Explorer

Model Tested: E1F110

Capacity - 6100g

Readability - 0.1g

Note:

The Explorer normally comes with an RS232 serial interface fitted as standard, please check with your balance supplier

that this is the case.

Setting up the balance:

• Getting into RS232 Mode

Turn the unit on.

Press the “Setup” button.

Press the “right” button until “RS232” is displayed then press the “Enter” button.

• Setting the Baud rate to 1200.

“BAUD” should now be displayed, press the “Enter” button.

Press the up or down buttons until “1200” is displayed then press the “Enter” button.

• Setting the Parity to none.

“PARITY” should now be displayed, press the “Enter” button.

Press the up or down buttons until “nonE” is displayed then press the “Enter” button.

• Setting the Data to 7 bits.

“DATA” should now be displayed, press the “Enter” button.

Press the up or down buttons until “7” is displayed then press the “Enter” button.

• Setting the Stop bits to 2.

“STOP” should now be displayed, press the “Enter” button.

Press the up or down buttons until “2” is displayed then press the “Enter” button.

• Setting Lock to Off.

“LOCK” should now be displayed, press the “Enter” button.

Press the up or down buttons until “OFF” is displayed then press the “Enter” button.

• Returning to normal operation.

“EXIT” should now be displayed, press the “Enter” button.

Serial Balance Adapter Data Sheet OH-2

© DCP Microdevelopments Ltd www.dcpmicro.com [email protected] 12/12/00

Setting up the balance (continued):

• Getting into Print setup mode.

Press the “Setup” button.

Press the “right” button until “PRINT” is displayed then press the “Enter” button.

• Setting the balance to autoprint.

“AUTOPRT” should now be displayed, press the “Enter” button.

Press the up or down buttons until “CONT” is displayed then press the “Enter” button.

• Returning to normal operation.

Press the left or right buttons until “Exit” is displayed, press the “Enter” button.

The balance is now set up to work with the LogIT Serial Balance Adapter - See Connecting the Balance for details of the

lead required to connect the balance to the LogIT Adapter.

Connecting the balance:

A cable must be made to connect the balance serial port to the LogIT Serial Adapter using the wiring information below.

Explorer RS232 port, 9 way D Socket Balance Adapter, 9 Way D Socket

pin 2 pin 2

pin 5

pin 6

pin 7 pin 5

Note: These connection instructions are designed for use with the 9 pin boxed version of the LogIT Serial Balance

Adapter. If using the original 25 pin lead type connection you need to use adapter pin 3 instead of pin 2 (data out) and

adapter pin 7 instead of pin 5 (ground).

Serial Balance Adapter Data Sheet OH-2

© DCP Microdevelopments Ltd www.dcpmicro.com [email protected] 12/12/00

Connect balance pin 5 to pin 6 to bypass handshaking

Indice

Altri manuali OHAUS Scala

OHAUS

OHAUS Valor 1000 Manuale utente

OHAUS

OHAUS Ranger 3000 Series Manuale utente

OHAUS

OHAUS Navigator Series Manuale utente

OHAUS

OHAUS Valor 3000 Manuale utente

OHAUS

OHAUS defender 7000 Manuale utente

OHAUS

OHAUS Ranger 3000 Series Manuale utente

OHAUS

OHAUS Scout SJX Manuale utente

OHAUS

OHAUS Ranger Counting Scale Manuale utente

OHAUS

OHAUS Valor 1000 Manuale utente

OHAUS

OHAUS YJ103 Manuale utente

OHAUS

OHAUS PJX Series Manuale utente

OHAUS

OHAUS RC41M15-M Manuale utente

OHAUS

OHAUS PX Series Manuale utente

OHAUS

OHAUS ES6R Manuale utente

OHAUS

OHAUS Valor V31X Manuale utente

OHAUS

OHAUS 4000W Series Manuale utente

OHAUS

OHAUS Adventurer Pro AV53 Manuale utente

OHAUS

OHAUS Aviator 7000 Series Manuale utente

OHAUS

OHAUS Adventurer AX Manuale utente

OHAUS

OHAUS Navigator NV212 Manuale utente

OHAUS

OHAUS EC Series Manuale utente

OHAUS

OHAUS Defender 3000 Series Manuale utente

OHAUS

OHAUS NV123 Manuale utente

OHAUS

OHAUS CL Series Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente