OHAUS SJX1502N/E Manuale operativo

Additional Instructions ScoutSJX Balances

Ohaus Corporation www.ohaus.com iScoutSJX Balances

UNPACKING

Carefully remove your Scout balance and each of its components from the

package. Store the packaging material to ensure safe storage and future transport.

Included Components:

Balance

Pan

User Guide &

Instructions

Calibration Mass (only for SJX/E models with 64g

capacity)

Warranty Card

Scoop (only for models with 64g capacity)

AC Adapter & Plug

CALIBRATION

When the balance is operated for the first time, a calibration is recommended to

ensure accurate weighing results.

External Span Calibration

With balance turned on:

Step-1

Press and hold Menu until [mMeNU] (Menu) is displayed.

Step-2

Release the button, the display will show [C.A.L].

Step-3

Press Yes to accept. [SpaN] will then be shown.

Step-4

Press Yes to begin the span calibration. Zero reading is stored

automatically.

Step-5

Place the specified span calibration mass on the pan. Then, press Yes

to accept the weight or No to select an alternate weight.

[--C--] will be displayed while the reading is stored

The display will show [done] if the calibration was successful. The

balance returns to the previous application mode and is ready for use.

Internal Calibration (not available for SJX/E models)

With balance turned on:

Step-1

Press and hold Menu until [mMeNU] (Menu) is displayed.

Step-2

Release the button, the display will show [C.A.L].

Step-3

Press Yes to accept. [In.CAL] will then be shown.

Step-4

Press Yes to begin the Internal calibration. Zero reading is stored

automatically.

Step-5

Pull the InCal handle while the display show

[PULL].

Step-6

Push the InCal handle while the display

show [PUSH].

Step-7

Repeat the step-5, and step-6 one more

time.

Step-8

The display will show [done] if the calibration was successful. The

balance returns to the previous application mode and is ready for use.

Visit www.balances.com for balances, scales & calibration weights

Visit www.scaleman.com to purchase Ohaus Scout SJX Scale

Scout

SJX Balances Additional Instructions

ScoutSJX Balances ii Ohaus Corporation www.ohaus.com

OPERATION & APPLICATIONS

The balance can be configured to operate in one or more Application modes.

Press and hold Mode key to select your Application mode.

The Scout SJX balance incorporates the following Applications:

[wWeIGH]

[Count]

[Percnt]

[CHeCk]

[total]

[SPEC.Gr]

[Hold]

Weighing

Parts

Counting

Percent

Weighing

Check

Weighing

Totalization

Density

Determination

Display

Hold

ADDITIONAL FEATURES

Connecting the Interface

Use an optional interface connectivity kit to

connect the balance either to a computer,

printer or OHAUS auxiliary display.

Below Interface kit accessories are available:

RS232, USB Host, USB Device, Ethernet,

Bluetooth*.

Interface connection on the rear of

the balance:

* Interface kits may vary according to local regulations

Weigh Below Hook

The weigh below hook is located at the reverse side of the battery cover as shown.

To use this feature, remove the red protective cover underneath for the weigh below

opening. For SJX, the weigh below hook is integrated and located under the

protective cover. For SJX/E, the weigh below hook is stored in the battery

compartment (back side of the battery cover).

INSTRUCTION MANUAL

For more detailed information about the balance,

please refer to the product instruction manual. The

instruction manual can be obtained either by

scanning the QR code or by going to the Scout SJX

product page to download it.

Go to www.ohaus.com to register your product's

warranty.

Product Page: http://www.ohaus.com/

QR Code:

Interface connection

AC Adapter Jack

Security slot

Weigh below protective cover

Weigh below hook

(SJX/E only)

Visit www.balances.com for balances, scales & calibration weights

Visit www.scaleman.com to purchase Ohaus Scout SJX Scale

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali OHAUS Scala

OHAUS

OHAUS HH 320 Manuale utente

OHAUS

OHAUS Valor V71P1502T Manuale utente

OHAUS

OHAUS ranger 7000 Manuale utente

OHAUS

OHAUS TA152 Manuale utente

OHAUS

OHAUS Ranger Count 3000 Series Manuale utente

OHAUS

OHAUS SD Series Manuale utente

OHAUS

OHAUS Explorer EX6202N Manuale utente

OHAUS

OHAUS DEFENDER SERIES Manuale utente

OHAUS

OHAUS PJX Series Manuale utente

OHAUS

OHAUS Navigator Manuale utente

OHAUS

OHAUS FD3 Manuale utente

OHAUS

OHAUS C51XE6R Manuale utente

OHAUS

OHAUS NV123 Manuale utente

OHAUS

OHAUS NV123 Manuale utente

OHAUS

OHAUS CHAMP II BASE Manuale utente

OHAUS

OHAUS Adventurer AX124/E Manuale utente

OHAUS

OHAUS DEFENDER D60ER Manuale utente

OHAUS

OHAUS Traveler Manuale utente

OHAUS

OHAUS Catapult 1000 Manuale utente

OHAUS

OHAUS CS 2000 Manuale utente

OHAUS

OHAUS Adventurer AX2201/E Manuale utente

OHAUS

OHAUS SB1200 Manuale utente

OHAUS

OHAUS valor 5000 series Manuale utente

OHAUS

OHAUS Valor 2000W Series Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente