OHDIOLAB ALPHA Manuale utente
ALPHA
User Manual
INTRODUCTION
OhdioLab ALPHA is astylish business/sporty smartwatch that has multiple practical functions
and services for convenient use of your smartphone and some functions for your sports and
health as well.
ALPHA supports Bluetooth call, ECG heart rate monitoring, multi-sports modes, and much
more.Please read this manual to fully understand the operation of the product.This manual is
subject to change without prior notice.
ALPHA smartwatch is IP68-rated and can be worn in rain or when you are washing hands or
swimming.However, do not wear it when taking shower with warm water or having asauna
because it is not steam-proof.OhdioLab will not be responsible if the water enters the
smartwatch because of your failure to follow this manual.If there is water in the speaker hole,
swing it out to make the sound normal again.
1
WHAT’S IN THE BOX
2
Leather/Silicone
Watch Strap
ALPHA watch Charging Cable
SETTING UP
ALPHA can be set up easily by downloading ‘FunDo’ app onto your smartphone.
Step 1: Download ‘FunDo’
•Method 1:
Scan the QR code using your smartphone (you can also find the
same QR code on the smartwatch menu with the listing name ‘App’).
Select an app store you wish to install the app onto your phone.
•Method 2:
On your smartphone, go to your app store and search ‘FunDo’.
•Apple App Store for iPhone users
•Google Play for Android users
Install the app.
Step 2: Once ‘FunDo’is installed, open the app and continue to follow the on-screen
instructions to connect ALPHA to your smartphone.Choose ‘Agree’ for each permission
prompt during installation of the application.The smartwatch can realise all of its functions
after connected via both Bluetooth 3.0 and Bluetooth 4.0.
3
Connection of Bluetooth 4.0:
After the app is installed, start it and enable the smartphone Bluetooth. The app will then give
a prompt to enable notification. Click ‘OK’. On the bottom menu, click ‘More’ to add a
new device . On your watch’s time interface, swipe down the status bar,
click the Bluetooth icon to enable Bluetooth. Search for ‘Smart Watch’ and click ‘Connect’
on your smartphone.
For some Android smartphones, the watch’s name can be searched after the GPS is enabled.
Connection of Bluetooth 3.0:
Enter the main menu of the smartwatch, search the desired Bluetooth device name under the
‘Bluetooth’ menu, choose ‘Enable Bluetooth’, click the desired smartphone Bluetooth, click ‘OK’
on the prompt of Bluetooth connection and click ‘Agree’ for prompt about each smartphone
permission.
Check Bluetooth connection:
On your watch’s time interface, swipe down the status bar. If the Bluetooth symbol in the pull-
down menu is green, it means that Bluetooth 4.0 has been connected; if it is blue, it means that
Bluetooth 3.0 has been connected; if it is blue in the upper part and green in the lower part, it
indicates that both Bluetooth 3.0 and Bluetooth 4.0 have been connected.
4
Notification setup:
On your smartphone, enter ‘Setting’, ‘Application management’, ‘FunDo’and ‘Permission
management’ sequentially and enable all the permissions there.
After that, enter ‘Notification management’ and ‘FunDo’sequentially and enable all the
permissions there.Start ‘FunDo’, choose ‘More’, ‘Application push notification’ and ‘Enable run
on background’ sequentially, enter the application management and choose ‘Unrestricted’.
Click ‘Back’.There will be aprompt about enabling automatic start again.Enable automatic
start.Click ‘Back’ and choose the APPs that you want to have synchronous notification (such
as QQ, WeChat, etc). The WeChat on your smartphone cannot receive notifications when its
web version is online at the same time.For some smartphones, ‘FunDo’needs to be added to
the power saving whitelist to avoid being killed on the background when the smartphone
battery is low.
Solution for failure of notification:
The notification of the smartwatch is synchronous with that on your smartphone (this applies
to notifications about messages, incoming calls, QQ messages or WeChat messages).
Therefore, if there is no such notifications on your smartphone, there will be no such
notifications on your smartwatch.The solution is entering ‘Setting’ and ‘Notification’ on your
smartphone, finding out the corresponding Apps and enabling their notification.
5
Troubleshooting:
Different smartphones probably have different Bluetooth protocols and this may result in
unstable Bluetooth connection between the smartphone and the smartwatch.To solve this
problem, disable and enable the Bluetooth of your smartphone, or restore the defaults of the
smartwatch.If the smartwatch has crashed, press its power button to restart it.
6
CHARGING
1. Connect the supplied charging cable into aUSB power supply or certified wall charger.
2. Hold the other end of the charging cable near the port on the back of the watch until it
attaches magnetically.Make sure the pins on the charging cable align with the port on
the back of your watch.
•It takes about 2.5 hours to fully charged.
7
Keep the two contacts of the charging cable from conductive objects
to avoid burn because of short-circuit.
BASIC NAVIGATION
Power button:
Long press it to power on or off the
smartwatch.Press it shortly to go back to the standby
page.If the smartwatch has crashed, press this button for
10 seconds to restart it.
Back button:
Press it shortly to return to the previous
menu.
TP gestures:
Swipe right on the screen to enter the heart
rate mode.Swipe left to enter the main menu.When in a
function, swipe right to go back or left to enter the next
menu.
Dial switching:
Adial selection page will appear after the
time page is long pressed.Choose the desired dial and
click ‘OK’.
Status bar:
Swipe down on the standby page to show the
Bluetooth connectivity status, battery level, time, etc.
8
Power button
Back button
SMARTWATCH FUNCTIONS
Messages
For synchronizing the messages on your smartphone (not applicable to iOS devices).
Phone Book
For synchronizing the contacts on your smartphone.
Call Logs
For synchronizing the call history on your smartphone.
Dial
For making phone calls using your smartphone from the smartwatch.
ECG (Electrocardiogram)
With help of the optical heart rate technology, the smartwatch can get your
electrocardiogram about tens of seconds later. After the measurement, letters ‘ToAPP’ will
appear on the screen and the electrocardiogram will be saved on the ‘FunDo’ app on your
smartphone. You can share your electrocardiograms to others for purpose of reference.
9
Indice
