Z2000/C2020 Tank Gauge Setup Guide – PD02/0001 Rev.01 Feb/2017
Z2000 / C2020
Tank Gauge Set-Up Stage 2
10
Senso Selection. The senso should be
connected at this point. This should be
Automatic and ead eithe Voltage o Cu ent
If it needs to be changed, Use the Right Button
to Set Voltage o Cu ent as equi ed.
Calib ation, the Senso Settings can be
adjusted to suit the individual senso .
For oltage sensor, the Ze o Value and the Max Value can
be adjusted up o down to suit.
(Both must be adjusted the same amount)
If Gauge eads LOW, inc ease these values. (max +0.05)
If Gauge eads HIGH, dec ease these values (max -0.05)
For Current sensor, the Ze o Value can be
adjusted up o down to suit. (Max self adjusts)
If Gauge eads LOW, inc ease these values.
If Gauge eads HIGH, dec ease these values
High Accuracy Calibration Adju tment (Advanced etting )
Sensor “Span”.
As Standard, this comes set for 2.55 M.
Change this to suit the sensor range
you have
C22 = 2.55 M C23 = 3.0 M
C25 = 5.0 M C27 = 10.0 M
Cu se (Hidden button) YES
END
Toggle the switch.
Gauge etu ns to
Standa d Readings
11
Sensor Offset.
How fa f om the bottom of the tank is the
senso positioned. Ente this he e.
As standa d we would ecommend 50 mm
which is 0.05 M Cu se Confi m YES
Now use Right Button to Sensor Type screen
12
