oliser MS 45 Manuale utente
MS45INSTRUCTIONS
Mesrutiyet caddesi. Hatay Sokak. 17/B
06640. Kızılay / Ankara
Turkey
Tel : +90 312 417 72 75
Fax : +90 312 425 72 81
Web : www.oliser.com.tr
To Order Call: +90 312 417 72 75
preparation
Place an Ink supply bottle to the back of the machine and insert the
ink supply tube into the bottle.
Plug in the plug and the machine will be ready to start filling .
Now, The machine is ready to fill the cartridges. Before filling the
cartridges, be sure that they are empty. If not, evacuate the remaining ink
from cartrdige.
This machine is desinged to only fill FRESH CARTRIDGES if u do
not have a steam genarator.
Strictly recommended : Before filling the cartridges we
recommend you to clean the printheads of the cartridges by a steam
genarator. It will help you to fill the cartridges easily and will open the all
clogged or dried printheads, So, your success rate will inscrease
To Order Call: +90 312 417 72 75
Place the cartridge in to the evacuation station if necessary
Squeeze the cartridge by using the handle
Switch on the Evacuation switch to start Evacuation
Then remove the cartridge
To Order Call: +90 312 417 72 75
Place the cartridge in to the filling station
Sequre the cartridge by using the handle
Then remove the cartridge using the handle and test it
To Order Call: +90 312 417 72 75
Tube replacement of motors
Altri manuali oliser Accessori per stampanti
