OLIBOARD - Interactive Whiteboards2
SYSTEM REQUIREMENTS
The whiteboard must be connected to a computer that displays images on the
whiteboard by means of a video-projector.
Minimum Configuration Recommended Configuration
CPU: Dual Core processor
3600+ 1.9 GHz
CPU: Dual Core Processor
4000+2.11 GHz or higher
RAM: 1 GB RAM: 2 GB or higher
USB port (for connecting
whiteboard)
USB port (for connecting
whiteboard)
Hardware
Configuration
VGA port (female, type SUB-
D15) for connecting the video-
projector.
NOTE: some computers are not
equipped with this type of port.
In this case you must use an
adapter (not supplied with the
whiteboard and projector).
VGA port (female, type SUB-
D15) for connecting the video-
projector.
NOTE: some computers are not
equipped with this type of port. In
this case you must use an
adapter (not supplied with the
whiteboard and projector).
Windows 7, Windows XP Windows 7
Software
Configuration
Recommended Computer Setup:
1)To obtain the best picture on the whiteboard, the format of the computer
video output (its resolution) and of the projector must be the same as that
of the whiteboard.
Therefore, for whiteboards in format 4/3 (Oliboard 78S and Oliboard 78D), it is
recommended to use an output resolution corresponding to the 4/3 format (e.g.
1024x768 or 800x600).
For a whiteboard in format 16:9 (Oliboard 95D), it is recommended to use an
output resolution corresponding to the 16:9 format (e.g. 1280x800).
2)While using the whiteboard, the computer connected could enter “stand-
by” mode. To avoid this, it is advisable to deactivate the screen-saver and
energy-saving functions.
