Olsen 58468 Istruzioni per il montaggio

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 21a

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

To ol s r eq ui r ed f o r as s em bl y a nd se rvice m a y not be i nc luded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 58468

Specifications

Compatible Gasses Argon, CO2, or Argon/CO2 mix

Maximum Inlet Pressure 3000 psig

Flow Range 0-60 SCFH

IMPORTANT SAFETY INFORMATION

Installation Precautions

1. DANGER! DO NOT CONNECT TO ACETYLENE

CYLINDER. This Regulator can allow pressures

that can cause acetylene to explode.

2. Assemble only according to these instructions.

Improper assembly can create hazards.

3. Wear ANSI-approved safety goggles and

heavy-duty work gloves during assembly.

4. Keep assembly area clean and well lit.

5. Keep bystanders out of the area during assembly.

6. Do not assemble when tired or when under the

influence of alcohol, drugs or medication.

7. Do not use oil or grease on any gas connection.

8. Only use included adapter. Do not use

an adapter to attach this Regulator to

any gas other than those listed.

9. Do not attach gas at a pressure above the

Maximum Inlet Pressure listed above.

Operation Precautions

1. This product is not a toy. Do not allow

children to play with or near this item.

2. Use as intended only.

3. Inspect before every use; do not use

if parts are loose or damaged.

4. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

1-888-866-5797 at Harbor Freight Tools

or [email protected]

for a replacement.

Cylinder Safety

Cylinders can explode when damaged.

1. Do not weld on a pressurized or closed cylinder.

2. Do not allow an electrode holder,

electrode, welding torch, or welding

wire to touch the cylinder.

3. Keep cylinders away from any electrical circuits,

including welding circuits.

4. Keep protective cap in place over the valve

except when the cylinder is in use.

5. Use only correct gas shielding equipment

designed specifically for the type of welding

you will do. Maintain this equipment properly.

6. Protect gas cylinders from heat, being struck,

physical damage, slag, flames, sparks, and arcs.

7. Use proper procedures to move cylinders.

8. Do not stand in front of Regulator

when opening cylinder valve.

Page 3For technical questions, please call 1-888-866-5797.Item 58468

Installation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

1. Wear ANSI-approved safety goggles.

To clean the shielding gas cylinder’s valve,

keep your face and ears away from the valve

then open it slightly and immediately close it.

This is called “cracking” the valve. It clears

the valve of dust before connection.

Note: Do not use thread seal tape or compound

on the fittings on this Regulator. They will

weaken any connection they are used on.

2. Connect the Regulator to the shielding gas cylinder’s

valve and wrench tighten the connection.

3. Back the Knob on the Regulator

off fully to prevent flow.

4. Connect the gas line from the outlet of

the Regulator to your welding equipment.

Wrench tighten all connections.

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document

including all text under subheadings therein before set up or use of this product.

1. Check that the gas line and welding system are

completely set up and all connections are tight.

2. Check that the Regulator is securely fastened

to the shielding gas cylinder and the Knob

on the Regulator is backed off fully.

3. Open the valve on the shielding gas cylinder

slightly until the cylinder pressure gauge

stops moving, then open it fully.

4. Close the gas valve on the welder. Check all

pressurized connections for leaks using soapy water.

Tighten or replace leaking connections as needed.

5. Open all gas valves that are

downstream from the Regulator.

6. Slowly tighten the Knob on the Regulator

while keeping an eye on the Flow Gauge until

it indicates the desired SCFH flow rate.

7. Close valve on welder until ready to start welding.

8. After use, close cylinder valve fully and open all

valves downstream from the Regulator to release all

pressure on it. Back off the Knob on the Regulator

until it is just loose and then tighten it back down

1 turn to prevent damage to the valve seat.

26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability

standards, and warrants to the original purchaser that this product is free from defects in materials

and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to

damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside

our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,

special or consequential damages arising from the use of our product. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion

may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Note: Replacement parts are not available for this item. Reference UPC 193175439802.

Altri manuali Olsen Controllori

Olsen

Olsen 57574 Istruzioni per il montaggio

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente