OLT Bayside Manuale utente
10ft Octagon Bayside
Gazebo Assembly
Manual
Jan 10th, 2017
Revision #19
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 1
Thank you for purchasing a
10 ft Bayside Gazebo. Please take
the time to identify all the parts prior
to assembly. The parts list can be found
on Page 2 of this Manual. Sorting parts
will help you organize and prepare for
each section. There are 7 sections:
A. Floor Section
B. Rafter Section
C. Rail Section
D. Floor Section
E. Roof Section
F. Cupola Section
G. Miscellaneous Section
Safety Points and Other Considerations
Our products are built for use based on proper installation and normal residential use, on level ground. Please
follow the instruction manual when building your Gazebo and retain the manual for future maintenance
purposes.
Some of the safety and usage measures you may wish to consider include:
-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.
Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free
of any liability for improper installation, maintenance and repair.
In the event of a missing or broken piece, simply call the Outdoor Living Today Customer Support
Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you to
courier replacement parts, free of charge, within 10 business days of this notification. Replacement
parts will not be provided free of charge after the 30 day grace period.
We recommend reviewing this Assembly
Manual thoroughly before starting this
project. Become familiar with the tools
required and where and when assistants
are necessary. If you’re planning on
finishing the Gazebo in a weekend, we
recommend completing up to Step 47
on your first day.
Thank you for purchasing our 10ft Bayside Gazebo Kit.
Please take the time to identify all the parts prior to assembly.
Parts List:
A. Floor Section (Page 4-11)
1 - 5 1/4” - Diameter Octagon Core Block
8 - 1 1/2” x 5 1/2” x 55 1/4” - Main Floor Joist
8 - 1 1/2” x 5 1/2” x 24 3/4” - “T” Post Mount Plate / Main Floor Joist
8 - 1 1/2” x 5 1/2” x 42 3/8” - Mid Floor Joist
8 - 1 1/2” x 5 1/2” x 12” - Interior Core Brace - angle cut on ends
8 - 1” x 5 1/2” x 48 3/4” - Outer Rim Joists
8 - 3 1/2” x 3 1/2” x 91 1/4” - Posts - Angle Cut on Top / Drilled on Bottom
1 - Plywood Post Spacing Template - Angle cut on ends
B. Rafter Section (Page 12-14)
8 - 3 1/2” x 3 1/2” x 58 1/8” - Rafters (Angle Cut on each end)
8 - 1 1/2” x 6” x 14 7/8” -Octagon SkyBox Pieces (Cut,Dado and Drilled)
C. Rail Section (Page 15-19)
7 - 43 5/8” x 36” - Hand Rail Section
14 - 9/16” x 3 1/8” x 40” - Hand Rail End Caps - Dog Ear and Router edges.
8 - 43 5/8” x 10” - Upper Rail Section
8 - 9/16” x 3 1/8” x 15 1/4” - Upper Rail End Caps -Right Side (Angle Cut One End with Hole)
8 - 9/16” x 3 1/8” x 15 1/4” - Upper Rail End Caps -Left Side (Angle Cut One End with Hole)
8 - 1 1/2” x 3 1/2” x 55” - Mid Rafters
D. Floor Section (Page 20-23)
8 - Pre-assembled Deck Floor Panels - Triangular Shaped
8 - 1” x 5 1/2” x 50 5/8” - Perimeter Deck Board- notched for Post
8 - 1” x 5 1/2” x 13 1/4” - 2nd to last Deck Board
8 - 1” x 5 1/2” x 8 5/8” - Last Deck Board
1 - 1” x 10” - Octagon Center Deck Piece
E. Roof Section (Page 24-28)
8 - Large Roof Panels
8 - Facia Boards - 1” x 4 1/2” x 54 5/8” - Angle Cut on ends
16 - 1 1/2” x 5 1/2” x 22 5/8” - Corner Brackets - 8 left / 8 right
F. Cupola Section (Page 29-33)
8 - Side Rail Sections - 14 7/8” wide
1 - Small Core Block- Octagon
8 - 1 1/2” x 1 1/2” x 24” - Rafter (angle on both ends)
8 - 3/4” x 1 1/2” x 18” - Facia
8 - Small Roof Panels
24 - Cupola Ridge Caps (2 1/2’ wide “V” shaped) 8 - 16” long / 8 - 14 1/2” long / 8 - 10 1/2” angle ends
1 - Top Cap & Ball Top
G. Miscellaneous Section (Page 34-36)
8 - Facia Corner Detail Plates (Small)
8 - Rim Joist Corner Detail Plates (Large)
80 - Cedar Roof Ridge Cap Shingles
(8 need to be trimmed for last row)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 2
10’ BAYSIDE GAZEBO HARDWARE SHEET
2”
1 1/2”
1 1/4”
Finishing
Shingle
Hardware Kit (Provided)
Safety Glasses Work Gloves
Safety Equipment Required (Not Provided)
Ladder
Screw Gun/Drill Tape Measure
Hammer Wood Clamp
Level Pliers
Tools Required (Not Provided)
1/8” Drill Bit
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 3
3”
Carriage Bolts x 40 pcs.
Square Drive Bit
Utility Knife
1/2” Wrench
Flange Nuts x 40 pcs.
In Florida, additional hardware may be required that is
not included in kit due to hurricane winds. Please
check with local building code to confirm.
2”
Stainless Steel
5 1/2” long
340 pcs
460 pcs
50 pcs
70 pcs
210 pcs
1 pc
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 4
A. Floor Section
1. Locate both the Long Main Floor Joist and
the “T” Post Mount Plate. Angle cut ends
must be positioned to the outside.
Pre-drilled holes will align with Posts later in Step
10. Please review this step to confirm correct “T”
Post Mount Plate orientation. Use 4 - Carriage
Bolts to align Joist with “T” Plate prior to attach-
ing. Joist must be evenly spaced between bolts.
Remove Carriage Bolts when correctly aligned.
2. With pieces properly orientated, screw
“T” Plate and Joist together with 2 - 3” screws. Make
sure pieces are flush with each other on the top and
bottom. Complete all 8 Long Main Floor Joist and “T”
Post Mount Plate Connections. Once again, check
alignment prior to attaching together.
Long Main Floor Joist
55 1/4” long
“T” Post Mount
with Holes Drilled
Drilled Holes
Measure to center of Plate
Joist evenly
spaced between
bolts.
3. Locate the 5 1/4” Diameter
Octagon Core Block. Place at
end of one of the Long Main
Floor Joists.
4. Position end of joist equally on one side of the
Core Block. Angle screw with 3 - 3” screws from
the top and sides. Joist and top of Core Block
should sit flush with each other.
Note, Drill 1/8” pilot holes in joist prior to screwing
to prevent splitting.
5. Lay completed Core Block / Joist Assembly on
flat level surface.
6. Position and angle screw the
second joist assembly to opposite
side of Core Block.
7. Continue to add Joist Assemblies to
Core Block.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 5
8. At this stage, your
gazebo floor should look
similar to the illustration to
left.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 6
9. Locate and position a Mid Floor Joist (42 3/8” long) and an Interior Core Brace (12” long). Make
sure the longer side of Core Brace is flush with the end of the joist and attach together with 2 - 3”
screws. Once again, make sure Core Brace is centered and flush with joist. Complete all 8 attachments.
Interior Core Brace
(angle cut on ends)
12” long
Mid Floor Joist
10. Set completed Mid Joist / Core Brace
Assembly between the main Joist
Assemblies but do not attach.
Important: To confirm
Doorway location, refer
to Step 16.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 7
12. Locate 3 1/2” x 3 1/2” Posts. Align
first Post with four drilled holes in bottom
aligned with “T” Post Mount Plates.
Important: Be sure to align Post so top
angle cut is high to the inside.
Angle Cut of Post
(high side = inside)
11. Position remaining Mid Joist / Core Brace Assemblies
roughly between the main Joist Assemblies. Some adjusting
will be necessary to form a symmetrical pattern.
4 Holes Drilled
in bottom of
each Post
Do not
attach until
Step 22.
15. From the inside, slide a
Flange Nut over bolt and tighten.
Important:
Only snug Carriage Bolts at this
stage. After Handrail and Upper
Baluster Section are installed,
come back and firmly tighten all
Carriage Bolts with a wrench.
13. When holes are
aligned, slide 4 - Carriage
Bolts from the outside
through Post and “T” Post
Mount Plates.
14. Complete all four “T” Post
Mount and Post Carriage Bolt
attachments.
Important:
Once again, only snug Carriage Bolts
at this stage. After Handrail and Upper
Baluster Section are installed, come
back and firmly tighten with wrench.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 8
Flange Nut
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 9
16. Locate 2nd Post and Plywood Post Spacing Template. Align and secure Post to Joist Assembly
as per Steps 12-15. Using the Post Spacing Template, slide between posts as illustrated above.
17. Locate one Outer Rim Joist (1” x 5 1/2” x 48 3/4”) and position evenly from side to side between each
Post. Level Rim Joist with top of “T” Post Mount. Screw Rim Joist to Post with 2 - 3” screws.
2nd Post
Plywood Post
Spacing Template
Push posts together
tight against Template.
18. Before attaching opposite end of Rim Joist to Post, push Post tight against Template and then
attach Rim Joist to Post with 2 - 3” screws. Line up Mid Joist with Mid Joist Template Marker and
when correctly centered attach Mid Joist to Rim Joist with 1 - 3” screw.
Line up
Mid Joist
with
Template
Marker.
1 - 3”
screw into
Mid Rafter.
Level with top of “T”
Post Mount. See
Step 23.
Door Way
21. Continue to attach Posts and
Outer Rim Joists until all 8 are
complete. Continue to use Post Spacing
Template to confirm correct spacing.
Remember- Align Post with high side to
the inside.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 10
19. Locate 3rd Post. Align and secure Post as per Steps 12-15. Using the Post Spacing Template,
position 3rd Post as per Step 16.
3rd Post
20. With 3rd Post correctly positioned,
align and attach the Outer Rim Joist as per
Step 17 - 18.
Any gaps between the ends Rim Joists
will be covered by Rim Joist Detail
Plates in Step 121.
Angle Cut of Post
(high side = inside)
Indice
Altri manuali OLT Arredamento per esterni
OLT
OLT 12ft X 16ft Breeze Pergola Manuale utente
OLT
OLT 24 Manuale utente
OLT
OLT 10ft X 16ft Breeze Pergola Manuale utente
OLT
OLT Outdoor Living Today Manuale utente
OLT
OLT 12ft Octagon Bayside Manuale utente
OLT
OLT Dog House Manuale utente
OLT
OLT Naramata Manuale utente
OLT
OLT Grand Garden Chalet 6X3 Manuale utente
Manuali Arredamento per esterni popolari di altre marche
Belleze
Belleze 014-HG-20074 Manuale utente
Hatteras Hammocks
Hatteras Hammocks DCA1-K-HH Manuale utente
Kozyard
Kozyard Morgan Aluminum Pergola Manuale utente
Lemeks
Lemeks Palmako PA120-5959 Manuale dell'installatore
Polywood
Polywood 400 Series Manuale utente
forest-style
forest-style HACIENDA 2354 Manuale di istruzioni
