Olympus TomoScan FOCUS LT Manuale utente
DMTA041-01EN [U8778479] — Rev. C
May 2014
TomoScan FOCUS LT
Phased Array Data Acquisition Instrument
User’s Manual
This instruction manual contains essential information on how to use this Olympus product safely and effectively.
Before using this product, thoroughly review this instruction manual. Use the product as instructed.
Keep this instruction manual in a safe, accessible location.
Olympus Scientific Solutions Americas, 48 Woerd Avenue, Waltham, MA 02453,
USA
Copyright © 2009, 2014 by Olympus. All rights reserved. No part of this
publication may be reproduced, translated, or distributed without the express
written permission of Olympus.
This document was prepared with particular attention to usage to ensure the
accuracy of the information contained therein, and corresponds to the version of
the product manufactured prior to the date appearing on the title page. There
could, however, be some differences between the manual and the product if the
product was modified thereafter.
The information contained in this document is subject to change without notice.
Part number: DMTA041-01EN [U8778479]
Rev. C
May 2014
Printed in Canada
All brands are trademarks or registered trademarks of their respective owners and
third party entities.
DMTA041-01EN [U8778479], Rev. C, May 2014
Table of Contents
iii
Table of Contents
Table of Contents ............................................................................................. iii
Labels and Symbols ........................................................................................... 1
Important Information — Please Read Before Use ..................................... 5
Intended Use .......................................................................................................................... 5
Instruction Manual ................................................................................................................ 5
Instrument Compatibility ..................................................................................................... 5
Repair and Modification ....................................................................................................... 6
Safety Symbols ....................................................................................................................... 6
Safety Signal Words ............................................................................................................... 7
Note Signal Words ................................................................................................................. 7
Safety ....................................................................................................................................... 8
Warnings ................................................................................................................................. 8
Battery Precautions ................................................................................................................ 9
Equipment Disposal ............................................................................................................ 10
WEEE Directive .................................................................................................................... 10
EMC Directive Compliance ................................................................................................ 10
Warranty Information ......................................................................................................... 10
Technical Support ................................................................................................................ 11
Introduction ...................................................................................................... 13
1. Instrument Overview ................................................................................ 15
1.1 Front Panel Description ........................................................................................... 15
1.2 Back Panel Description ............................................................................................. 20
DMTA041-01EN [U8778479], Rev. C, May 2014
Table of Contents
iv
2. System Installation .................................................................................... 25
2.1 Standard Equipment ................................................................................................. 25
2.2 Instrument Installation ............................................................................................. 25
2.3 Instrument Connection ............................................................................................ 27
2.4 Probe Connection ...................................................................................................... 28
2.5 Automatic Startup Modes ........................................................................................ 29
2.5.1 Auto-Boot on AC Power ................................................................................ 29
2.5.2 Auto-Boot on DC Power ................................................................................ 30
2.5.3 Auto-UT Mode ............................................................................................... 30
3. Operation Overview .................................................................................. 31
3.1 Hardware Configuration ......................................................................................... 31
3.2 TomoScan FOCUS LT Main Unit ............................................................................ 32
3.3 Workstation ................................................................................................................ 32
3.4 Ethernet Link ............................................................................................................. 33
4. Maintenance and Troubleshooting ........................................................ 35
4.1 Preventive Maintenance ........................................................................................... 35
4.2 Instrument Cleaning ................................................................................................. 35
4.3 Maintenance of the Fan Filters ................................................................................ 36
4.3.1 Cleaning the Fan Filters ................................................................................. 37
4.3.2 Changing the Fan Filters ............................................................................... 37
4.4 Fuse Changing ........................................................................................................... 38
4.5 Troubleshooting ........................................................................................................ 40
5. Specifications .............................................................................................. 41
5.1 General Specifications .............................................................................................. 41
5.2 Operating Specifications .......................................................................................... 42
5.2.1 Pulser/Receiver Differences and Limitations ............................................. 42
5.2.1.1 Specifications of Models FLT16128-P-O and FLT16128-R-O ......... 45
5.2.1.2 Specifications of Models FLT32128-P-O and FLT32128-R-O ......... 47
5.2.1.3 Specifications of Models FLT64128-P-O and FLT64128-R-O ......... 49
5.2.1.4 Specifications of Models FLT3232-P-O and FLT6464-P-O ............. 51
5.2.2 Specifications of Conventional UT Channels ............................................. 53
5.3 Specifications of Recorded Data ............................................................................. 54
5.4 Specifications of the Ethernet Link ......................................................................... 55
5.5 Safety Standards ........................................................................................................ 56
6. Connector References ................................................................................ 59
6.1 I/O Connector ............................................................................................................ 60
6.2 DC OUT Connector .................................................................................................. 62
DMTA041-01EN [U8778479], Rev. C, May 2014
Table of Contents
v
6.3 DC IN Connector ...................................................................................................... 63
6.4 ETHERNET Connector ............................................................................................ 64
6.5 P Connectors .............................................................................................................. 65
6.6 UT PHASED ARRAY Connector ............................................................................ 66
List of Figures ................................................................................................... 67
List of Tables ..................................................................................................... 69
Index ................................................................................................................... 71
DMTA041-01EN [U8778479], Rev. C, May 2014
Table of Contents
vi
DMTA041-01EN [U8778479], Rev. C, May 2014
Labels and Symbols
1
Labels and Symbols
Safety-related labels and symbols are attached to the instrument at the locations
shown in Figure i-1 on page 1. If any or all of the labels or symbols are missing or
illegible, please contact Olympus.
Figure i-1 Identification label location
Location of rating label (see Table 1 on page 2).
DMTA041-01EN [U8778479], Rev. C, May 2014
Labels and Symbols
2
Table 1 Content of the rating label
Content
The CE marking is a declaration that this product conforms to
all the applicable directives of the European Community. See
the Declaration of Conformity for details. Contact your Olympus
representative for more information.
The WEEE symbol indicates that the product must not be
disposed of as unsorted municipal waste, but should be
collected separately.
The CSA C/US mark signifies that the product meets
applicable U.S. and Canadian standards, including those from
CSA, CSA America, ANSI, ASME, ASSE, ASTM, NSF, and UL.
DMTA041-01EN [U8778479], Rev. C, May 2014
Labels and Symbols
3
To avoid the risk of electric shock, do not touch the inner conductor of the DC OUT
(Direct Current Out) connector. Up to 12 V can be present on the inner conductor. The
warning symbol between the I/O(In/Out) and the DC OUT connectors shown in the
figure below warns of this electric shock risk.
SERIAL The serial number is a nine (9) digit number in the following
format:
yynnnddmm
where:
yy Production year
nnn Unit number manufactured that day
dd Production day
mm Production Month
For example, the 080011612 serial number indicates that the
first unit (001) was produced on the December 16, 2008.
Table 1 Content of the rating label (continued)
Warning symbol
DC OUT connector inner conductor LEMO 01 connectors
DMTA041-01EN [U8778479], Rev. C, May 2014
Labels and Symbols
4
Indice
