Olympus MAJ-1901 Manuale utente
Department Confidential Drawing
number P1
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Instruction Manual
MAJ-1901
Quick Start Guide
Department Confidential Drawing
number P2
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Copyright 2010 Olympus Technologies Singapore Pte Ltd. All rights reserved.
Olympus and Olympus logo are trademarks of Olympus Technologies Singapore Pte Ltd. Other product and brand names may be trademarks or registered
trademarks of their respective owners.
Olympus Technologies Singapore Pte Ltd assumes no responsibility for any damage or loss resulting from the use of this guide. Olympus Technologies
Singapore Pte Ltd assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. Olympus Technologies
Singapore Pte Ltd assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery or repairs. To protect
against data loss, be sure to make backup copies (on other media) of all important data.
Important: Please read the End User License Agreement for this product before using the device or accompanying software program(s). Using the device
or any part of the software indicates that you accept the terms of the End User LicenseAgreement.
Department Confidential Drawing
number P3
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Content andAdditional Resources
To help you get started with your MAJ-1901 PDA, this guide features:
- Hardware Overview
- Getting Started
- Regulatory Information
For additional product details, visit www.olympus.com.sg
For software updates and information, visit www.microsoft.com.
Department Confidential Drawing
number P4
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Hardware Overview
Figure 1: PDA Layout
Department Confidential Drawing
number P5
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Figure 2: Keys Layout
Figure 3: PDA Back Layout
Department Confidential Drawing
number P6
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Getting Started
Installing/Replacing the Main Battery
The main battery is replaceable after removing the battery cover located at the back of the PDA.
Charging the PDA (Main Battery)
1) Plug the power jack into cradle connector in the direction as shown.
Department Confidential Drawing
number P7
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
2) Switch on the power and ensure the Green LED on power adapter light up. Place the PDAin the cradle as shown, observes the amber LED at
the top right corner of PDA:
The LED charging indicator is shown below:
Mode Amber LED
Charging SolidON
ChargeFull OFF
ChargingFault Blinking
3) Up to 3 cradles can be cascaded using the L-Bracket and screws provided to form a single gang cradle (refer to diagram below), and it is able to
charge up to 6 PDA simultaneously. Note: If a fourth cradle is cascaded, the fourth cradle will not work at all.
Department Confidential Drawing
number P8
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Department Confidential Drawing
number P9
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Resetting the PDA
Reset Type Steps Definition
Soft reset
(Warm Boot)
1. Press Left Scan and F3 keys
simultaneously.
OS and application software will
be reset.
Hard reset
(Cold Boot)
1. Remove battery compartment cover.
2. Press Reset switch (in battery
compartment) using a stylus
3. Attach battery compartment cover.
4. Press Power On button.
Hardware will be reset.
Master reset
(Clean Boot)
1. Remove battery compartment cover.
2. Press Reset switch (in battery
compartment) using a stylus.
3. Attach battery compartment cover.
4. Press and hold the SCAN button.
5. Press Power On button.
System settings are restored to
factory default.
Keys & Switches
Refer to Figure 1.
Power
Button
Power
button
Press this key once to power on the device, to resume
the device from suspend mode, or to place the
terminal into suspend mode.
Keypad Refer to Figure 2
Department Confidential Drawing
number P10
Model No. MAJ-1901 Product Specification Section 15. Instruction Manual
Application
buttons
Equipped with 4 function keys F1, F2, F3, F4. The
keys are user configurable via software application to
launch particular applications.
Enter
button
Execute a selected application.
Up button Move a cursor upwards
Down
button
Move a cursor downwards
Left button Move cursor to the left
Right
button
Move cursor to the right
Back button Return to the previous level
Shift button Change the function keys to different set of function
keys
Scan Key Trigger either the barcode scanner or RFID reader by
application.
Refer to Figure 1
Side Button
Scan
Buttons
Pressing any of these keys will trigger either the
barcode scanner or RFID reader (controlled by
software application).
Reset Switch Refer to Figure 3
Indice
Altri manuali Olympus PDA
