Olympus XC30 Manuale utente
Installation Manual
XC30
CCD color camera
English
Optical Microscope Accessory
CCD color camera XC30
Any copyrights relating to this manual shall belong to Olympus Soft Imaging Solutions GmbH.
We at Olympus Soft Imaging Solutions GmbH have tried to make the information contained in
this manual as accurate and reliable as possible. Nevertheless, Olympus Soft Imaging
Solutions GmbH disclaims any warranty of any kind, whether expressed or implied, as to any
matter whatsoever relating to this manual, including without limitation the merchantability or
fitness for any particular purpose. Olympus Soft Imaging Solutions GmbH will from time to time
revise the software described in this manual and reserves the right to make such changes
without obligation to notify the purchaser. In no event shall Olympus Soft Imaging Solutions
GmbH be liable for any indirect, special, incidental, or consequential damages arising out of
purchase or use of this manual or the information contained herein.
No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the prior written permission of
Olympus Soft Imaging Solutions GmbH.
Windows, Word, Excel and Access are trademarks of Microsoft Corporation which can be
registered in various countries. Adobe and Acrobat are trademarks of Adobe Systems
Incorporated which can be registered in various countries.
© Olympus Soft Imaging Solutions GmbH
All rights reserved
Printed in Germany
510_UMA_XC30_en_05__08-March-2016
Olympus Soft Imaging Solutions GmbH, Johann-Krane-Weg 39, D-48149 Münster,
Tel. (+49)251/79800-0, Fax.: (+49)251/79800-6060
3
Contents
1The CCD color camera XC30 . . . . . . . . . . . . . . . . 4
1.1 Scope of supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3 Operating and storage conditions . . . . . . . . . . . . . . . . . . 6
2General safety instructions . . . . . . . . . . . . . . . . . 7
2.1 Avoiding personal injuries . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Avoiding device damage . . . . . . . . . . . . . . . . . . . . . . . . . 8
3System environment . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Microscope and camera adapter . . . . . . . . . . . . . . . . . . 10
3.2 PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.3 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.1 Step 1: Inserting the FireWire board . . . . . . . . . . . . . . . 13
4.2 Step 2: Install the software . . . . . . . . . . . . . . . . . . . . . . . 14
4.3 Step 3: Connect the camera . . . . . . . . . . . . . . . . . . . . . . 15
4.4 Step 4: Installing the camera driver . . . . . . . . . . . . . . . . 16
5 Care and maintenance . . . . . . . . . . . . . . . . . . . . 21
6Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.1 The installation program won't start . . . . . . . . . . . . . . . . 22
6.2 The camera can't be found . . . . . . . . . . . . . . . . . . . . . . . 23
6.3 No image appears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.4 Stripes appear in the image . . . . . . . . . . . . . . . . . . . . . . 29
6.5 Another problem has occurred . . . . . . . . . . . . . . . . . . . . 30
7Notes on conformity and disposal . . . . . . . . . . . 32
8Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
CCD color camera XC30
4
1 The CCD color camera XC30
1.1 Scope of supply
The camera's scope of supply comprises:
Camera with protective cap
FireWire board
FireWire cable
Installation manual
Protective cap
CCD chip
FireWire port
Camera
FireWire board FireWire cable Installation manual
two 6-pole FireWire plugs
DVD with TWAIN software getIT
1 The CCD color camera XC30 Specifications
5
Other essential
components
To be able to use the camera, you'll also need the following components:
PC with MS-Windows operating system
Light microscope with camera adapter or something similar, for example a
macro stand
Software to operate the camera (see chapter 3.3 on page 12)
1.2 Specifications
Properties of
the XC30
The XC30 is a cooled, high-resolution CCD color camera used for biomedical and
material sciences applications. It was specially developed for acquisitions using light
microscopy.
The XC30 is of a compact design and can be connected to all common types of light
microscope by a C-mount. Its high dynamic range enables it to acquire images
which have both very light and very dark areas. The ICC profile technology
guarantees an optimal color mapping.
Binning modes The XC30 has two binning modes. In binning mode, the camera's CCD sensor
combines neighboring pixels into pixel blocks. This results in a higher sensitivity and
a shorter processing time but also in a lower resolution.
Technical data XC30
Chip type CCD
Chip size Type 1/1.8 Inch
Effective area (width x height) 8.10 mm x 6.64 mm
Pixel size 3.45 µm x 3.45 µm
Maximum resolution 2080 pixels x 1544 pixels
Image type 14-bit color image (RGB)
Read-out speed 24.5 MHz
Exposure times 0.1 ms - 160 s
Interface FireWire™IEEE1394a
Camera mount Standard C-Mount
Binning Resolution Frame rate
Maximum resolution 2080 x 1544 pixels 7.0 images per second
Binning 2x 1040 x 772 pixels 13.6 images per second
Binning 3x 688 x 514 pixels 35.0 images per second
CCD color camera XC30
6
1.3 Operating and storage conditions
Please operate and store your camera under the following conditions:
The recommended ambient temperature during camera operation is + 10°C to
+ 25°C. The maximum permissible range for the ambient temperature during
camera operation is + 5°C to + 40°C.
The maximum permissible relative humidity during camera operation is 80 %
(condensation free).
When the camera is stored or transported, the ambient temperature must be
kept between - 25°C and + 70°C.
2 General safety instructions Operating and storage conditions
7
2 General safety instructions
The camera has been developed and produced on the basis of state-of-the-art tech-
nology and in conformity with recognized safety regulations. However, it is not
possible to entirely rule out possible hazards for the user, damage to the camera or
microscope, or impairments of the camera's functionality. For this reason, always
read and follow the general safety instructions and warnings before and during the
installation.
Serious injuries can occur
The warning sign and the word Warning indicate dangerous situations
that can lead to serious injuries or even death if ignored.
Light injuries can occur
The warning sign and the word Caution indicate dangerous situations
that can lead to light injuries if ignored.
Damage to devices can occur
The exclamation mark and the word Attention indicate situations,
where irreparable damage to the camera, microscope or PC can occur
if ignored.
Reduced functionality can occur
Notices only printed with an exclamation mark indicate that ignoring
them can reduce or hamper the camera's functionality.
Warning
Caution
Attention
CCD color camera XC30
8
2.1 Avoiding personal injuries
Warning
Electric shock due to damaged cable!
Warning
Poisoning due to toxic gases!
Caution
Tripping hazard!
2.2 Avoiding device damage
Attention
Never open the camera housing!
Attention
Avoid vibration shocks!
Attention
Secure microscopes with additional components!
When a cable is frayed or damaged, a person touching it risks the danger of an
electric shock.
Shut off the hardware and replace the cable immediately!
In the case of a fire, the material of the camera can give off toxic gases. When
these are inhaled, it can cause irritation of the respiratory passages and damage
to them.
Wear respiratory protection when fighting the fire!
Cables laid across a room can be a dangerous tripping hazard. This can cause
injuries to people and damage to equipment.
Wherever possible, lay cables along the wall or behind furniture. Fix cables that run
across the room into place!
The camera's CCD chip is extremely sensitive. Electrostatic discharge can perma-
nently damage the camera.
Therefore, never, under any circumstances, open the camera housing!
Mechanical shocks and strong vibrations can damage the camera.
Don't drop the camera during installation. Make sure it is securely mounted on the
microscope. When it's not in use, store it in a safe place!
A top-heavy microscope can tip over or fall down and result in damage to both the
camera and the microscope.
If the microscope is top-heavy or otherwise unstable, fix it to the wall!
Attention
Don't touch the protective glass!
Attention
Observe the operating conditions!
Attention
Don't expose the camera to strong light!
2 General safety instructions Avoiding device damage
9
The protective glass over the CCD chip is extremely sensitive and must not come
into contact with bare hands or any other objects, otherwise the acquisitions will be
impaired by fingerprints or scratches.
Remove dust from the protective glass carefully with compressed air. For the
removal of dust stuck due to static electricity, ionized air is recommended.
Exposure to high temperatures or humidity can damage component parts of the
camera.
Always observe the operating and storage conditions (see chapter 1.3 on page 6)!
Exposure to strong light can cause the camera to overheat, which may cause
damage to its component parts.
Do not expose the camera to strong light (such as sunlight) for long periods of time.
CCD color camera XC30
10
3 System environment
3.1 Microscope and camera adapter
FireWire cable FireWire board
Software incl. camera driver
PC Monitor
Adapter ring
U-CMAD3
U-TV1x-2
U-TV0.5xC-3 U-TV0.63xC
GX-TV0.5xC
GX-TV0.7xC
XC30
MVX-TV0.63xC
MVX-TV1xC
Camera
Camera adapter
Upright
microscope
BX61/ BX51/ BX41
CX41/ CX31/ MX61
MX61L/ MX51
BX43/ BX46/ BX53
BX63
Inverted
microscope
IX81/ IX71/ IX51
IX83/ IX73/ IX53
Stereo
microscope
SZX16/ SZX10
SZX7/ SZ61
Inverted
metallography
microscope
GX71/ GX51
Fluorescence
microscope
MVX10
Suitable camera
adapters
The system table shows the camera adapters you can use to connect the XC30 to
many available Olympus microscopes. Please note that you can also use
microscopes that are not listed there. Basically, all of the camera adapters with the
magnification factor 0.5 or larger are suitable.
Indice
Altri manuali Olympus Telecamera di sicurezza
