Omcan IC-CN-0060 Manuale utente
Revised - 12/07/2020
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
Ice Maker
Model IC-CN-0060
Item 31780
Instruction Manual
2
Page
-------------------------------------------------------------------------------------------- 3
--------------------------------------------------------------------------- 4 - 5
--------------------------------------------------------------------------- 5 - 6
-------------------------------------------------------------------------- 7
-------------------------------------------------------------------------------------- 7 - 10
------------------------------------------------------------------------------------- 11 - 13
--------------------------------------------------------------------------------- 13 - 15
----------------------------------------------------------------------------- 15 - 16
---------------------------------------------------------------------------- 17 - 18
---------------------------------------------------------------------------- 19
------------------------------------------------------------------------------------------- 20 - 22
---------------------------------------------------------------------------- 23
Table of Contents
Section
Disclaimer
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model IC-CN-0060
3
Disclaimer
OMCAN IS NOT RESPONSIBLE FOR
ANY DAMAGES DUE TO WATER LEAKS.
WARRANTY FOR WATER LEAKS IS VOID
IF THE WICKING PAD IS NOT REPLACED
EVERY SIX MONTHS, AND IF THE AMBIENT
ROOM TEMPERATURE EXCEEDS 75°F
AND 55% RELATIVE HUMIDITY, AND THE
APPLIANCE DRAIN IS NOT CONNECTED
DIRECTLY TO THE FLOOR DRAIN.
4
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
5
Safety and Warranty
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre leer y familiarizarse con todas las instrucciones de
operación y seguridad.
Omcan quisiera darles las gracias por la compra de esta máquina. Es de la máxima importancia para
guardar estas instrucciones para referencias en el futuro. También guarde la caja original y el embalaje
para envío del equipo si el mantenimiento o la devolución de la máquina es necesaria.
Please read the following instruction before operating the machine.
• Proper installation, use and maintenance of this machine are all important for maintaining production and
personnel safety. In order to reduce the failure rate, please read the instructions carefully. Improper use
could result in equipment damage, personal injury or even death.
• Do not use the ice maker if you have not been trained.
• Do not let children play with the ice maker or its packaging materials.
6
Safety and Warranty
• At least two people are required to lift the ice maker or it is recommended that a lifting device is used.
• A qualied and competent person must perform the installation and ongoing maintenance.
• When operating, all procedures must be followed to ensure no damage occurs to the cooling system.
• Do not operate the ice maker if there is any unauthorized changes to the original specications of the
machine, or if the machine is misused, abused or neglected.
• Ensure the ice maker’s front panel and cover are in place before turning this machine on.
• Do not cover the ice-maker’s vents, there must be at least 15 cm clearance around the ice maker at all
times during operation.
• Do not store ammable gases or liquids near the ice maker.
• Do not use high-pressure water cleaning devices to clean the ice maker.
• It is the user’s responsibility to take appropriate precautions to ensure the safety of sta using and for the
ongoing maintenance of the ice maker.
• To prevent accidental injuries, keep the area clean and tidy.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without diculty.
In any case, for suitable recycling, we suggest disposing of the products separately (dierentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
7
Technical Specications
Installation
Model IC-CN-0060
Ice Production 200 lbs. / 90 kgs. per day
Bin Capacity 70 lbs. / 31.8 kgs.
Power 420 W
Ice Shape Cube
Refrigerant R290
Electrical 110V / 60Hz / 1
Max Ambient Temp Rating 32°C / 90°F
Water Temperature 8° - 32°C / 46.4° - 90°F
Water Pressure 0.14 - 0.55 mpa
Dimensions 28” x 25.5” x 37.3” / 711 x 648 x 946mm
Packaging Dimensions 28.3” x 27.2” x 37.8” / 720 x 691 x 960mm
Weight 114.6 lbs. / 52 kgs.
Packaging Weight 127.9 lbs. / 58 kgs.
Item Number 31780
IMPORTANT
• The manual is an integrated part of the product and should be kept and preserved by the users for future
reference. Please read the instructions carefully for correct installation method, safety warnings and
maintenance information of the product.
• This ice maker is designed for commercial use and should be used for purpose for which it has been
expressly designed. Any other use should be considered improper and therefore dangerous. The
manufacturer will not be liable or responsible for any damage caused by improper, incorrect and
unreasonable use.
WARNING
The installation must be carried out by qualied personnel, in accordance with current regulations, and as per
the manufacturer’s instructions.
UNPACKING
WARNING
Keep the packing material out of reach of children, (such as plastic bag, polystyrene, etc.)
• Remove shipping carton, tape and packing. If packing material is left in the ice maker, it will not work
properly.
• After removing the packing, make sure the ice maker is in good condition. If in doubt, please do not use the
8
Installation
ice maker but please give a call to either the seller or Omcan for advice.
• Remove shipping tape which is holding the door and front panel.
• Remove the protective plastic lm from the exterior. If the ice maker is exposed to the sun or heat, remove
the lm after ice maker cools down.
• Remove the package of accessories, and check the content:
- Inlet water tube.
- Ice shovel.
- Foot base.
- Drain tube.
- Plastic connector.
LOCATION
• This ice maker is not intended for outdoor use. Normal operating ambient temperature should be within
10°C to 43°C, normal operating water temperature should be within 8°C to 32°C, operation of ice maker
for extended periods, outside of these normal temperature ranges, may aect ice production capacity and
performance.
• Ensure that free ow of clean air is available around the ice maker.
• The ice maker should not be located close to the heat source or exposed to the sun.
• Location should provide a rm and level foundation for the ice maker.
• Allow 15cm clearance at rear and sides for proper air circulation and ease of maintenance.
• This ice maker is not suitable for installation in an area where a water jet could be used and where water
dripping is not allowed.
• To prevent damage to the water supply line, please drain the ice maker when ambient temperature is too
low.
LEVEL ADJUSTMENT OF ICE MAKER
• The level adjustment aects the ice size.
WARNING
If the power supply cord is damaged, don’t operate the machine until it is replaced by the authorized service
agent or qualied technician.
CAUTIONS
Please take protective measures when the ambient temperature is below 10°C. Faults due to the ambient
temperature below 10°C are not covered by warranty.
• Place a level measurement at the machine top, adjust the machine base for front & rear, left & right
balance.
9
Installation
ELECTRICAL CONNECTION
WARNING
All wiring must conform to local, state and national regulations.
• This ice maker must be plugged into an independent power source, or an electrical socket of voltage at
specied range.
• This ice maker must be connected with an independent fuse / circuit breaker.
WATER SUPPLY AND DRAIN CONNECTION
• Check if there is a need to install water treatment & lter system based on the local water situation. This
can avoid the formation of precipitates, lter impurities and remove the smell of bleach.
• Water supply pressure should be minimum 0.14Mpa and maximum 0.55Mpa. If the pressure exceed
0.55Mpa use a pressure reducing valve. Do NOT bend the supply tap.
• A plumbing permit and service of a licensed plumber may be required in some area.
• Water should drain into an open trap.
• Ice maker drain is gravity ow. Please ensure drain pipe has an adequate pitch or fall.
WARNING
Piping installation must conform to relevant regulations.
WARNING
The machine must be plugged into a properly grounded outlet and electricity supply as per rating plate.
• To prevent a backow into machine, please refer to the below image for installing water drain pipe.
10
Installation
• Attach the free end of inlet hose to the water supply tap. Hand tighten suciently to provide leak free joint.
It is advisable to have the stop valve within easy reach.
• Hand tighten exible water hose onto the tting on the rear of ice maker as indicated, conrm whether the
sealing ring has been tightened in the right position to avoid leaking at joints. The pipe can be cut to length
as necessary to suit position of main drain. To prevent water leaks, secure.
BEFORE ICE MACHINE START
All ice machine adjustment have been factory pre-set before shipment.
Adjustment to program or setting is not required for new ice machine installation.
In order to make sure that ice machine operate normally, please refer to the operation section of service
manual. Checking and monitoring of Ice machine operation is the responsibility of users.
PRE-INSTALLATION CHECKLIST
• Is ice machine installed on a horizontal leveled surface?
• Is ice machine water pipe installed correctly?
• Have all inner packaging and accessories been removed?
• Is water supply, drain and electricity connected properly?
• Is power supply voltage matching with the specied voltage on rating plate?
• Have users/operator lled in the warranty card?
• Is there proper ventilation around ice maker for good airow?
• Is ice machine and storage bin disinfected?
• Is ice machine grounded correctly?
• Is power switched on?
• Is ice machine located at ambient temperature between 10°C to 43°C?
• Is the inlet water temperature between 8°C to 32°C?
• Has the user / operator read this Use and Service Manual.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Omcan Macchina per il ghiaccio
Omcan
Omcan IC-CN-0012 Manuale utente
Omcan
Omcan IC-IT-0003 Manuale utente
Omcan
Omcan IC-CN-0040 Manuale utente
Omcan
Omcan IC-CN-0129S Manuale utente
Omcan
Omcan IC-CN-1450-E Manuale utente
Omcan
Omcan 37864 Manuale utente
Omcan
Omcan Santos 09 Manuale utente
Omcan
Omcan Santos 53 Manuale utente
Omcan
Omcan 37865 Manuale utente
Omcan
Omcan IC-CN-0089S Manuale utente
