Omega CN4000 Series Manuale utente

e-mail: [email protected]

For latest product manuals:

www.omegamanual.info

CN4000 SERIES

Temperature Controllers

Shop online at

omega.com

User’s Guide

NORWALK, CT

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves

the right to alter specifications without notice.

omega.com [email protected]

Servicing North America:

U.S.A. Omega Engineering, Inc.

Headquarters: Toll-Free: 1-800-826-6342 (USA & Canada only)

Customer Service: 1-800-622-2378 (USA & Canada only)

Engineering Service: 1-800-872-9436 (USA & Canada only)

Tel: (203) 359-1660 Fax: (203) 359-7700

e-mail: [email protected]

For Other Locations Visit omega.com/worldwide

CONTENTS

MODEL CONFIGURATION…….………………………………………….…………….2

SPECIFICATIONS………………………………………………………………….……..3

PARAMETER AND SETTING……………………………………………………………4

SYMBOL DESCRIPTIONS…………………………………………..…………………..7

INSTRUMENT INSTALLATION AND WIRING……..………………………….………8

DISPLAY AND OPERATIONS…………………………………………...……….……..9

OPERATION DESCRIPTION……………….…………………..……………….….…10

MODEL CONFIGURATION

Model Description

CN4116 (*)-(**)-(***) 1/16 DIN controller

CN4216 (*)-(**)-(***) 1/16 DIN controller, with 0.0 decimal

CN414 (*)-(**)-(***) 1/4 DIN controller

CN424 (*)-(**)-(***) 1/4 DIN controller, with 0.0 decimal

CN418V (*)-(**)-(***) 1/8 DIN Vertical controller

CN428V (*)-(**)-(***) 1/8 DIN Vertical controller, with 0.0 decimal

CN418H (*)-(**)-(***) 1/8 DIN Horizontal controller

CN428H (*)-(**)-(***) 1/8 DIN Horizontal controller, with 0.0 decimal

*Specify controlling output code from Output Options table below

** Specify alarm code from Alarm Options table below

*** Low voltage power supply option (-LV)

Controlling Output Options

Option Type Code

Relay -R1

DC SSR driver -DC1

AlarmingOutput Options

Option Type Code

Relay -R2

DC SSR driver -DC2

Low voltage power supply option

-LV 24V AC/DC, 50/60 Hz

SPECIFICATIONS

Thermocouple RTD

Input Type K S R E J N PT100

Range ℃/ ℉0 to1300 ℃

32 to 2372 ℉

0 to1700℃

32 to 3092 ℉

0 to1600℃

32 to 2412 ℉

0 to1000℃

32 to 1832 ℉

0 to1200℃

32 to 2192 ℉

0 to 1300℃

32 to 2372 ℉

-200 to 800℃

-328 to 1472 ℉

Accuracy:

CN 4116/CN414/CN418 0.3%FS ± 1℃/1.8°F

CN4216/CN424/CN428 0.3%FS ± 0.1℃/0.18°F

Temperature Display Resolution

CN 4116/CN414/CN418 1℃/1℉

CN4216/CN424/CN428 0.1℃/0.1℉

ON / OFF Control

Control Method AI PID Control with Auto Tuning (AT)

Relay Output (1A/250VAC)

Output Type Voltage Output for SSR(12V/30mA)

Limit High / Low

Alarm

(Modularization) High deviation/Low deviation

100~240VAC (-15%, +10%), or 24VDC

Supply Voltage

50 to 60Hz

Power Consumption ≦3W

Operating Environments Temperature: -10 to +60℃/ 14 to 140℉

Humidity: 0~90RH%

Electromagnetic compatibility

(EMC)

IEC61000-4-4: ± 4KV/5KHz

IEC61000-4-5: 4KV

PARAMETER AND SETTING

Field parameter table (Primary parameters)

Code Description Remarks Setting Range Default

HIAL High limit alarm Alarm on when PV>HIAL

alarm off when PV<HIAL- AHYS -999~+3000 3000

LoAL Low limit alarm Alarm on when PV<LoAL;

alarm off when PV>LoAL + AHYS -999~+3000 -999

HdAL Deviation high

alarm

Alarm on when PV-SV>HdAL;

alarm off when PV-SV<HdAL - AHYS -999~+3000 3000

LdAL Deviation low

alarm

Alarm on when PV-SV<LdAL;

alarm off when PV-SV>LdAL + AHYS -999~+3000 -999

Loc Parameter Lock

Loc Auto

Tuning SV Primary

Parameter

Secondary

Parameter

0 X

1 X X

2 X X X

3 X X X X

808

: allow to modify data or execute AT

X : not allow to modify data or execute AT

0~255 0

System parameter table (Secondary parameters)

Set the parameter ‘Loc’=808 to enter:

AHYS Alarm Hysteresis Avoid frequent alarm on-off action because of the

fluctuation of PV 0~200 2

AOP Alarm output

assignment

Alarm

Output to

LdAL

(x 1000)

HdAL

(x100)

LoAL

(x10)

HIAL

(x1)

None 0 0 0 0

AL1 1 1 1 1

eg: AOP=1101 means LdAL, HdAL and HIAL

alarm action output from AL1;LoAL, no alarm

action.

0~1111

1111

according

to fixed

module

CtrL Control mode

onoF : On-off control

APId : AI PID control, high precision

and no-overshot

onoF,

APId APId

Act NA No any function on this model. rE/dr/

rEbA/drbA rE

P Proportion band Proportion band in PID with unit ℃or ℉1~999 30

I Time of Integral No integral effect when I=0 0~9999

Sec 100 s

d Time of

derivative No derivative effect when d=0 0~999.9

Sec 50.0s

CtI Control period

Small value can improve control accuracy. For

SSR output, generally 0.5 to 3 seconds.

Large value can increase using life of relay. For

Relay output, generally 15 to 40 seconds.

0.5~120

Sec

2 s

20 s

CHYS Control

hysteresis

CHYS is used for ON-OFF Control.

PV > SV, Output turns OFF;

PV<SV-CHYS, Output turns ON.

0~200 2

InP Input

specification

InP Input spec. InP Input spec.

0 K 1 S

2 R 3 Spare

4 E 5 J

6 Spare 7 N

8-20 Spare 21 Pt100

1~21 0

dPt

Resolution

(only for CN42

series )

0 : 1 ℃/℉

0.0 : 0.1 ℃/℉

0.0

Scb Input Shift

Parameter Scb is used to make input shift to

compensate the error produced by sensor or input

signal itself.

PV-after-compensation=

PV-before-compensation + Scb.

-199~

+400 0

FILt PV input filter

The value of FILt will determine the ability of

filtering noise.

When a large value is set, the measurement input

is stabilized but the response speed is slow.

Generally, if great interference exists, then you

can increase parameter “FILt” gradually to make

momentary fluctuation of measured value less

than 2 to 5.

When the meter of the instrument is being

examined at laboratory, “FILt” should be set to 0

or 1 to short the response time.

0~40 1

Fru

Selection of power

frequency and

temperature scale

50C: 50Hz, ℃

50F: 50Hz, ℉

60C: 60Hz, ℃

60F: 60Hz, ℉

50C, 50F,

60C, 60F 50C

SPL Low limit of SV -999~

3000 0

SPH Upper limit of SV -999~

3000 400

SYMBOL DESCRIPTIONS

Symbol Description

orAL

Input specification setting is incorrect

Input wiring is disconnected/ thermocouple problem

Short circuited

HIAL High limit alarm

LoAL Low limit alarm

HdAL Deviation high alarm

LdAL Deviation low alarm

EErr IC Software error

8888 IC Software error

INSTRUMENT INSTALLATION AND WIRING

Wiring graph for instruments with dimension 1/4 DIN; 1/8 DIN Vertical and Horizontal

Note: The compensation

wires for different kinds of

thermocouple are different,

and should be directly connect

to the terminals. Connecting

the common wire between the

compensation wire and the

terminals will cause

measurement error.

Wiring graph for 1/16 DIN dimension instruments：

DISPLAY AND OPERATIONS

① Upper display window, displays PV,

parameter code, etc.

② Lower display window, displays SV,

parameter value, or alarm

③ Setup key, for accessing parameter

table and conforming parameter

modification.

④ Data shift key, and auto tuning.

⑤ Data decrease key

⑥ Data increase key

⑦ LED indicator. MAN, PRG, MIO,

COM, OP2, AL2, AU1 and AU2

Com indicators is non-applicable.

OP1 and AL1 will indicate I/O operation of the corresponding module.

Basic display status:

When power on, the upper display window of the instrument shows the process

value (PV), and the lower window shows the set-point (SV). This status is called

basic display status.

When the input signal is out of the measurable range (for example, the

thermocouple or RTD circuit is break, or input specification sets wrong), the upper

display window will alternately display “orAL” and the high limit or the low limit of PV,

and the instrument will automatically stop output. If the lower display window

alternately display “HIAL”, “LoAL”, “HdAL” or “LdAL”, it means high limit alarm, low

limit alarm, deviation high alarm, and deviation low alarm happening.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Regolatori di temperatura popolari di altre marche

Swegon

Swegon LUNAd MB Manuale utente

Lucky Reptile

Lucky Reptile Thermo Control II Manuale utente

SENSORMETRIX

SENSORMETRIX Argon 100 Manuale utente

Fuji Electric

Fuji Electric PXE4 Manuale utente

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuale utente

Selec

Selec TC544C Manuale utente

P.W. KEY

P.W. KEY rt-208gt Manuale utente

Future Design

Future Design FDC-9200 Manuale utente

BH Thermal

BH Thermal BriskONE Manuale utente

Omron

Omron E5EX-H Manuale utente

West Control Solutions

West Control Solutions KS 45 Guida rapida

MCS

MCS RITC-15B Manuale utente

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuale utente

eltherm

eltherm Ex-TC It Series Manuale utente

Omron

Omron C200H-TV Series Manuale utente

industrie technik

industrie technik CA1 Manuale utente

KRAL

KRAL EET 32 Manuale utente

dixell

dixell XR420C Schema elettrico