OmniBlend TM788 Manuale utente
OWNER’S MANUAL
OmniBlend III
TM788
OMNIBLEND (PTY) LTD
SOUTH AFRICA
www.omniblend.co.za
2
Table of Contents
LET’S GET STARTED........................................................................................................................................................3
SERVICE & REGISTRATION ............................................................................................................................................4
IMPORTANT SAFEGUARDS...........................................................................................................................................5
PARTS & FEATURES ......................................................................................................................................................10
ABOUT THE BLADES ....................................................................................................................................................12
HOW TO USE THE TAMPER?.......................................................................................................................................14
CONTROL PANEL .........................................................................................................................................................15
HINTS FOR SETTING SPEEDS......................................................................................................................................16
CARE AND CLEANING .................................................................................................................................................18
SPECIFICATIONS...........................................................................................................................................................21
3
LET’S GET STARTED
CONGRATULATIONS!
We hope that you’ll find the information in this step-by-step guide to be useful and beneficial.
Please read all the safety information, warnings, and instructional material found in this booklet before getting
started.
• Set your OmniBlend machine on a dry, level surface.
• Make sure that the power switch is set to Off, and that the machine is plugged into a grounded electrical
outlet.
• Then, follow the cleaning instructions on page 18 to prepare your machine for use. Always clean your
machine before the first use.
4
SERVICE & REGISTRATION
OMNIBLEND SERVICE & REPAIRS
Before returning this product for any reason, first contact OmniBlend Customer Service at 021 012 5999, email
For repair request: https://omniblend.co.za/pages/customer-return-form
PRODUCT REGISTRATION
Register your blender for faster and easier service in the future. You can register here:
https://omniblend.co.za/pages/product-registration-form
Failure to register your machine will not diminish your warranty rights.
5
IMPORTANT SAFEGUARDS
To avoid the risk of serious injury when using your OmniBlend blender, basic safety precautions should be
followed, including the following.
IMPORTANT INSTRUCTIONS FOR SAFE USE
Do not leave your OmniBlend blender unattended when operating. In case of a technical failure, contact
OmniBlend for any repairs or servicing requirements.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death or electrical shock.
6
The Automatic overload protection is a built-in feature which is designed to protect the motor and prevent
your machine from overheating. If the Overload Protection kicks in, the machine will stop operating
suddenly. Leave the machine to cool down for 5 to 10 minutes, and then (while the machine is still connected
to power), press the Overload Button on the bottom of the machine. The machine will now work as normal
again.
Overload Button
7
READ ALL INSTRUCTIONS AND SAFEGUARDS BEFORE OPERATING BLENDER.
1. Not intended for use by or near children or persons with reduced physical, sensory, or mental
capabilities or lack of experience and knowledge. Close supervision is necessary when any appliance is
used by or near children or incapacitated persons.
2. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
4. Avoid contacting moving parts.
5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Call OmniBlend Customer Service at 021 012 5999 or email
support@omniblend.co.za for examination, repair or replacement.
6. The use of attachments not expressly authorized or sold by OmniBlend for use with this blender,
including canning jars, may cause fire, electric shock, or injury.
8
7. Do not let cord hang over edge of table or counter. Do not let cord contact hot surface, including the
stove.
8. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons
or damage to the blender. A silicon scraper or spatula may be used, but only when the OmniBlend
blender is not running.
9. The tamper provided must be used only when the main part of the lid is in place.
10. Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care to
avoid injury. To reduce the risk of injury, never place a blade assembly on the motor base unless
assembled to the OmniBlend container.
11. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will
damage the blades and other components when starting the machine and may cause injury.
12. Never attempt to operate with damaged blades.
13. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when
adding ingredients and when using the tamper.
9
14. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding
and burns. Fill the jug 1/3 or max ½full. Filling the jug more than halfway can cause too much steam to
build up and can blow the lid off the blender. Remove the lid-plug, and place lid (without the cap)
securely on the jug. Cover the blender lid with a clean kitchen towel, and allow for an easy escape route
for the hot steam. Hold the lid securely, and start blending on lowest speed. Gradually increase speed if
needed.
15. When making nut butters or oil-based foods, be cautious of heat. The jug will heat up quicker than with
using liquids. Processing for longer periods can cause dangerous overheating. And can cause damage
to the jug. Leave the jug to cool for 10-15 min, and then continue processing.
10
PARTS & FEATURES
2-Part Lid: Is easy to put on and take off, and easy to clean. Always
use the lid and the lid insert when the machine is in operation. The
1.5ltr jug has a square lid, the 2ltr jug has a round lid. Both have lid
inserts; for the 2ltr jug, make sure it is fitted within the 2 little knobs,
to avoid it to rotate during blending. Remove the lid insert to use
the tamper or add ingredients.
Tamper: use the tamper for blending thicker textures, to move the
ingredients in the jug. ALWAYS use the tamper through the lid (by
removing the insert from the lid), as this prevents the tamper from
touching the blades.
Speed switch:always start blending on Low speed, and increase
the speed as required. For thicker textures, and tougher blends,
blend on High for optimal performance.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali OmniBlend Miscelatore
