Omron Cobra s600 Manuale utente

ASSEMBLY INSTRUCTIONS

Cobra s600/s800

Due to the loss of mating relationships during the conversions of IGS and STEP formats

from native Solidworks files, this document will go through the assembly of the Cobra

s600 and s800 simplified models.

After downloading the appropriate file, and opening it, note the following part names:

1. BASE ASSY

2. INNER LINK ASSY

3. OUTER LINK ASSY

4. QUILL ASSY

5. CABLE CONNECTOR (2X)

6. FLYOVER CABLE (Note: The FLYOVER CABLE will only stay assembled in

the Solidworks native assembly, and is built in context for this purpose.

- Start by “Fixing” the BASE ASSY.

- Mate the LOWER LINK ASSY to the BASE ASSY by:

1. Concentric relationship of the BASE ASSY ring to the LOWER LINK ASSY ring

2. Distance relationship of 3.59” (91.19mm) of the upper surface of the LOWER

LINK ASSY to the upper surface of the BASE ASSY.

2

3. Angular relationship of +/- 105 degrees of the center plane of the LOWER LINK

ASSY to the center plane of the BASE ASSY.

- Mate the OUTER LINK ASSY to the LOWER LINK ASSY.

1. Concentric relationship of the LOWER LINK ASSY “boss” to the UPPER LINK

ASSY “hole.”

3

2. Distance relationship of .272” (6.90mm) of the bottom of the OUTER LINK

ASSY to the upper surface of the LOWER LINK ASSY where the mounting

holes are located.

3. Angular relationship of +/- 150 deg. (+/- 157 deg. on the s800) of the center plane

of the OUTER LINK ASSY to the center plane of the LOWER LINK ASSY.

4

- Mate the QUILL ASSY to the OUTER LINK ASSY.

1. Concentric relationship of the QUILL ASSY to the OUTER LINK ASSY “front

hole.”

2. Distance relationship of 6.97” – 15.24” (177mm - 387mm) of the bottom of the

QUILL ASSY to the bottom surface of the BASE ASSY, on the s800 the

Distance relationship is 7.40” – 15.67” (188mm – 398mm).

3. There is no set rotation angle due to the QUILL ASSY being able to rotate 360

deg.

5

- Mate the CABLE CONNECTORS and the FLYOVER CABLE. Note, this part of

the assembly is only needed to check the layout for the clearance height for the

FLYOVER CABLE.

1. Concentric relationship of the CABLE CONNECTOR to the OUTER LINK and

BASE ASSY.

2. Coincident relationship of the CABLE CONNECTOR to the OUTER LINK and

BASE ASSY.

3. Concentric relationship of the long end of the FLYOVER CABLE to the CABLE

CONNECTOR attached to the BASE ASSY.

4. Coincident relationship of the long end of the FLYOVER CABLE to the inner

step on the CABLE CONNECTOR attached to the BASE ASSY.

6

5. Coincident relationship of the center plane of the FLYOVER CABLE to the

center plane of the INNER LINK ASSY, this will allow the FLYOVER CABLE

to rotate, but not “flex” unless the original SW assembly is used.

Omron Adept Technologies, Inc.

Tel: 925-245-3400 Email: [email protected]

omron247.com

Speciﬁcations subject to change without notice.

2016 Omron. ALL RIGHTS RESERVED. Pub Number R58I-E-01

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Omron Robotica

Omron

Omron SCARA YRC Series Manuale utente

Omron

Omron Cobra 350 CR/ESD Manuale utente

Omron

Omron eCobra 600 Manuale utente

Omron

Omron HD-1500 Platform Manuale utente

Omron

Omron Medium Series Istruzioni per il montaggio

Omron

Omron LD-60 Manuale utente

Omron

Omron LD Platform Manuale utente

Omron

Omron TM Robot S Series Istruzioni per il montaggio

Omron

Omron TM5-700 Manuale utente

Omron

Omron TM Manuale utente

Omron

Omron Regular Payload Istruzioni per il montaggio

Omron

Omron MD Series Manuale utente

Omron

Omron S Series Manuale utente

Omron

Omron CR-UGD4MINI Series Manuale utente

Omron

Omron TM Series Istruzioni per il montaggio

Omron

Omron LD Manuale utente

Omron

Omron CR UGD4 Series Manuale utente

Omron

Omron iX3 565 Manuale utente

Omron

Omron fh series Guida utente

Omron

Omron Viper 650 Manuale utente

Omron

Omron i4H Manuale utente

Omron

Omron Hornet 565 Manuale utente

Omron

Omron CR_UDG4_NR Manuale utente

Omron

Omron HD-1500 Platform Manuale utente

Manuali Robotica popolari di altre marche

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuale utente

SunFounder

SunFounder PiDog Manuale utente

Universal Robots

Universal Robots UR5 Manuale utente

Universal Robots

Universal Robots E Series Manuale utente

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuale utente

EFORT

EFORT ECR5 Manuale di istruzioni

Epson

Epson C8 Series Manuale utente

WowWee

WowWee ROBOQUAD Manuale utente

Milvus Robotics

Milvus Robotics SEIT 100 Manuale utente

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuale utente

fischertechnik

fischertechnik Mini Bots Manuale utente

YASKAWA

YASKAWA MA2010 Manuale

Abicor Binzel

Abicor Binzel iCAT mini Manuale utente

ABB

ABB OmniCore E10 Manuale utente

YASKAWA

YASKAWA Motoman DX200 Manuale utente

pitsco

pitsco Tetrix Max Manuale utente

ECOVACS

ECOVACS DEEBOT R95 Manuale utente

Feng Yuan

Feng Yuan Interstellar Warrior Manuale utente