Omron OMNUC W Series Manuale utente

　　　　　ＵＳＥＲＳ　ＭＡＮＵＡＬ

　　　　　ＵＳＥＲＳ　ＭＡＮＵＡＬ　　　　　ＵＳＥＲＳ　ＭＡＮＵＡＬ

　　　　　ＵＳＥＲＳ　ＭＡＮＵＡＬ

ＯＭＮＵＣ　Ｗ　Ｓｅｒｉｅｓ／Ｕ　Ｓｅｒｉｅｓ

ＯＭＮＵＣ　Ｗ　Ｓｅｒｉｅｓ／Ｕ　ＳｅｒｉｅｓＯＭＮＵＣ　Ｗ　Ｓｅｒｉｅｓ／Ｕ　Ｓｅｒｉｅｓ

ＯＭＮＵＣ　Ｗ　Ｓｅｒｉｅｓ／Ｕ　Ｓｅｒｉｅｓ

Ｓｅｒｖｏ　Ｄｒｉｖｅｒ　／　Ｓｅｒｖｏｍｏｔｏｒ

Ｓｅｒｖｏ　Ｄｒｉｖｅｒ　／　ＳｅｒｖｏｍｏｔｏｒＳｅｒｖｏ　Ｄｒｉｖｅｒ　／　Ｓｅｒｖｏｍｏｔｏｒ

Ｓｅｒｖｏ　Ｄｒｉｖｅｒ　／　Ｓｅｒｖｏｍｏｔｏｒ

Ｃｏｍｐｕｔｅｒ　Ｍｏｎｉｔｏｒ　Ｓｏｆｔｗａｒｅ　ＷＭＯＮ　Ｗｉｎ　Ｖｅｒ１．０１

Ｃｏｍｐｕｔｅｒ　Ｍｏｎｉｔｏｒ　Ｓｏｆｔｗａｒｅ　ＷＭＯＮ　Ｗｉｎ　Ｖｅｒ１．０１Ｃｏｍｐｕｔｅｒ　Ｍｏｎｉｔｏｒ　Ｓｏｆｔｗａｒｅ　ＷＭＯＮ　Ｗｉｎ　Ｖｅｒ１．０１

Ｃｏｍｐｕｔｅｒ　Ｍｏｎｉｔｏｒ　Ｓｏｆｔｗａｒｅ　ＷＭＯＮ　Ｗｉｎ　Ｖｅｒ１．０１

General Warnings

About the display and the meaning to be safely used

At this manual, it is for the OMNUC W series / the U series.

To use personal computer monitor software safely, note item is shown by the following

display.

Of the important contents about the safety specified by note item which was shown here

Always, keep.

About the start-up of the numerous axis communication

Caution：

：：

：

　Set so as not for the number machine No. to overlap.

　Number machine NO. however, when beginning communication with the

　personal computer in the overlapping condition.

※1.When using numerous axis communication, before connecting with the

personal computer, set the number machine No. of each servo driver .

※2.In case of numerous axis communication, set number machine No. in

the range of 1-E(14), F(15).

Don't use number machine No.0 absolutely.

※3.There is not setting of number machine No. in UE.

( It isn't possible to do numerous axis communication ).

UT set number machine No. with the rotary switch in the front.

About the parameter transfer to servo driver

Caution：

：：

：

It confirms the thing that the number machine No. is right sufficiently before

transferring a parameter to servo driver .

About the wiring

Caution：

：：

：

The pulling-out shine of the communication cable go in the condition to have

cut the power of both of servo driver , the personal computer in.

During monitor soft start-up, don't exchange a nexus by the cable.

General Warnin

General Warnings

About the operation

Caution：

：：

：

When doing the power of servo driver on, off, go after making personal

computer monitor software quit.

In JOG operation, confirm that there are not a person and an obstacle

around the motor and the machine.

Also, during operation, don't do the pulling-out shine of the cable, the

stopping of the personal computer monitor software, the quitting of the

personal computer.

Reference Manual:

　The related users manual is as follows.

In the personal computer monitor software, in case of use, it is the one of the

corresponding goods.

Look together with the users manual.

When the users manual of the corresponding goods is not at hand, require to our

company’s sales person in charge.

The manual revision record

Name Cat. No.

The OMNUC W series AC servomotor / servo driver I531-E1

The OMNUC U series AC servomotor / servo driver

( 30 - 750 W Analog input type) I501-E1

The OMNUC U series AC servomotor / servo driver

( 30 - 750 W Pulse train input type) I502-E1

The OMNUC U series AC servomotor / servo driver

( 1000 - 5000 W ) I512-E1

The OMNUC U series UE -type AC servomotor / servo driver

(100 - 750 W Pulse train input type) I522-E1

The

revision

symbol

The revision

years The reason for the revision and the revision page

1.0 April,2000 The first edition

1.01 June,2000 The software start-up defect correction

Read well before using this software.

When the visitor doesn't agree the following software use assent contract, return to our

company sale shop.

The software use assent contract

This contract is the one to have specified the condition that the software assents to the visitor in the use

by Omron Corp..

1 The copyright

The copyright of this software (including all of the technology use, which relates to the

computer program and it and so on) is in Omron Corp.

2 The use assent

The visitor copies a computer program to one computer and can use it with the computer.

3 The copy

The visitor can not duplicate all or the part of this software except for the case of the

preceding clause.

4 About the change, the improvement

We refuse to do the opposite compilation, the opposite assembly of this software firmly.

5 The transfer and so on

It transfers software to the 3rd person and it isn't possible to make a visitor use in the other

loan, use assent way.

6 The immunity from responsibility

(1)The damage by the straight, the indirectness or the spread effect of the visitor who

occurred with the flaw of this book and the software

It doesn't very in にbear total responsibility.

(2)Even if it occurs with the use of the software when the damage occurs to the visitor, it is

negative now in the total responsibility.

It is not.

About the notation

This manual is describing the item of the operation as follows specifically.

●The example of the notation

【】……

menu name, a key, a dialog box name, the button name and so on are shown.

It sometimes is not in the place to know that it is a clarifying menu name in the table, and so

on, in the putting in 【】, too.

Ex.:【File 】The menu, the 【Tab】key, the 【search 】dialog box, the 【OK】button

| ……

menu is shown.

When there are many hierarchies of the menu, using "|", it sometimes omits as follows.

Ex.:【File 】|【The new creating 】

It shows to choose 【the new creating 】from the 【File 】menu.

Click

It shows to click on the left.

It omits the left click / the left double-click with the click / the double-click and being writing

by this book

In case of the right click, it is writing with the right click.

The contents

1-1 WMON Win ……………………………………………………… 1-1

1-2 Features ……………………………………………………… 1-2

1-3 The data which WMON Win creates ………………………… 1-4

2-1 The installation and uninstallation …………………………………2-1

2-2 The connection with PC …………………………………… 2-6

3-1 The start-up and the ending …………………………………… 3-1

3-2 The overview of the user interface ………………………… 3-2

4-1 The communication setting …………………………………… 4-1

4-2 The servo driver connection and the connection blocking-off…4-3

4-3 The parameter editing, the save and the transfer ……… 4-4

4-4 The monitor ……………………………………………………… 4-9

4-5 The alarm ……………………………………………………… 4-10

4-6 The JOG operation …………………………………………… 4-11

4-7 The corrugated data trace …………………………………… 4-12

Chapter 1 The overview

Chapter 2 The setup

Chapter 3 The basic operation

Chapter 4 The way of operating

Chapter 5 The troubleshooting

Chapter 1 The overview

1-1

"The OMNUC W series / the U series the personal computer monitor software WMON Win "

have folling functions.

･Parameter editing

･Jog operation

･The condition confirmation by the servo driver

･The corrugated display of the speed, the torque, the input/output

■

■■

■The application servo driver

WMON Win corresponds to the servo driver which shows below.

①R88D-WT□□H/-WT□□HL

②R88D-UA□□HA/-UA□□LA/-UA□□V/-UA□□W

( 30 - 750 W The analog input type )

③R88D-UP□□HA/-UP□□LA/-UP□□V/-UP□□W

( 30 - 750 W The pulse train input type )

④R88D-UT□□H/-UT□□V (1k-5kW)

⑤R88D-UEP□□H/-UEP□□L/-UEP□□V/-UEP□□W

( 100 - 750 W The pulse train input type )

■

■■

■The application personal computer

The condition of the personal computer which WMON Win can be used for is as follows.

Item The condition

The personal computer The DOS/V personal computer

The operating system Windows95/98

The CPU Pentium above

The memory 16 M byte min.

( 32 M byte equal to or more than )

The hard disk 10 M byte min.

The monitor SVGA( 800×600 pixel )

The CD-ROM drive Equal to or more than one

The communication port RS-232 or RS-422. Equal to or more than 1 port

1-1 WMON Win

Chapter 1 The overview

1-2

■

■■

■The parameter editing

･The parameter which was edited with the personal computer can be transferred to

the servo driver.

･The parameter which is set to the servo driver can be preserved at the disk.

･It is possible to read the parameter which was preserved at the disk.

･The parameter file which was created in " the OMNUC U series the personal

computer monitor software the MS-DOS version " can be edited.

Also, it is possible to transfer to the servo driver.

■

■■

■JOG operation

･It is possible to do the JOG operation of the servo motor.

( The JOG speed and the direction of the turn, too, can be set with the

personal computer. )

■

■■

■The condition confirmation of the servo driver

･The ON/OFF condition of the entry signal and the output signal of the servo driver

can be confirmed.

･The internal state of the servo driver can be confirmed.

･The speed feedback and the torque and so on can be monitored.

■

■■

■The corrugated display of the speed and the torque

･It can be displayed by taking in it at the time of the torque command, the speed

command , the speed feedback, the position deviation and so on.

･The ON/OFF condition of the input/output signal can be displayed by taking in it.

･Sampling time can be optionally set by the 250us unit.

･The taken data can be preserved at the disk.

･The corrugation can be output at the printer.

■

■■

■The numerous axis communication ( It excludes UE type ).

･With one personal computer, the maximum W series can communicate with 15 and

the U series can communicate with the servo driver in 14.

1-2　

　Features

Chapter 1 The overview

1-3

■

■■

■The parameter initialization

･The parameter can be returned to the factory shipment value.

■

■■

■English version , Japanese version installation

･English version ,Japanese version program software can be installed.

Altri manuali per OMNUC W Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Omron Servoazionamento

Omron

Omron R88D-KTA5L Manuale utente

Omron

Omron G5 Series Manuale utente

Omron

Omron R88M-1L Series Guida utente

Omron

Omron R88L-EA-AF Manuale utente

Omron

Omron R88M-W60010T Manuale utente

Omron

Omron R88M-K Series Manuale utente

Omron

Omron SMARTSTEP R7M-A Series Manuale utente

Omron

Omron OMNUC G Series Manuale utente

Omron

Omron 1S Series Guida utente

Omron

Omron G5 Series Guida utente

Omron

Omron OMNUC W Series Manuale utente

Omron

Omron R88M-K Series Manuale utente

Omron

Omron R88L-EC Series Manuale utente

Omron

Omron G Manuale utente

Omron

Omron OMNUC G5 Series Manuale utente

Omron

Omron R88D-KN ML2 Sries Manuale utente

Omron

Omron OMNUC U Series Manuale utente

Omron

Omron R88M-W Manuale utente

Omron

Omron CK M-CPU1 1 Series Guida utente

Omron

Omron CK5M-CPU 1 Series Guida utente

Omron

Omron JUNMA Series Manuale utente

Omron

Omron 1S Series Guida utente

Omron

Omron OMNUC R88D-WT15HF Manuale utente

Omron

Omron 3G3RX Series Manuale utente

Manuali Servoazionamento popolari di altre marche

Mitsubishi Electric

Mitsubishi Electric MELSERVO-J5 MR-J5-G Series Manuale utente

Robotis

Robotis XH430-W350-T Manuale utente

NTI AG

NTI AG LinMot C1250 Series Manuale utente

Welcon

Welcon WE2A D048 Series Manuale utente

Parallax

Parallax 900-00005 Manuale utente

Festo

Festo TP 1410 Manuale utente

Axor

Axor MAGNUM 400 Manuale utente

Siemens

Siemens SINAMICS S120 Manuale utente

Danfoss

Danfoss 176F6494 Manuale utente

THORLABS

THORLABS TDC001 Manuale utente

TECO

TECO JSDAP Series Manuale utente

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 6000 Manuale utente

GSK

GSK DA98D Manuale utente

Lenze

Lenze m850 Guida

Baumuller

Baumuller b maXX 3000 Manuale

Baumuller

Baumuller b maXX 5000 Manuale

Baumuller

Baumuller b maXX 5500 Manuale

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuale utente