OMUARK L5 Manuale utente

www.omconnect.com
USER MANUAL
L5-ZIGBEE DOOR LOCK
V1.0

01/16
Specification
Model
Unlock Mechanism
Battery life
Material
Jump Start
User Capacity
Card Type
Compatibility
L5/L5F
Body Zinc Alloy, SUS304,Tempered glass panel
12 Month ( 4 x AAA Alkaline Battery )
Zigbee, PIN Code, IC card, Fingerprint , App
USB-C
1000 cards, 100 password, 100 fingerprints
Encrypted M1 card
iOS/Android

Lock&Unlock
Emergency
Battery
Mobile Control
Administrator Unlock
.......
Anti-peeping Auto Locking
User Unlock
Add up to 10 digits before and after PIN code to
intensify your PINs.
This door lock allows to add up to 100 user PIN
codes for your family, friends and visitors.
If there are no opening motion in 10 seconds
the box will be automatically locked.
Zigbee Unlock Offline Unlock
Mobile Administrator
With your Mobile you could unlock the Door lock
by long press You could generate offline code through
mobile App, for scheduled access, parcel
delivery, housekeeping, etc.
Set Administrator PIN Codes from your Mobile to
unlock, add users, delete users, etc.
Battery Life
4 AAA batteries, the life cycle will be more
than 12 months, please use good batteries.
Low Battery
When the battery runs out of power, system
will remind you to replace the batteries.
When the power is down and use USB-C to
jump start the lock and get it unlocked
Jump Start
Set a Master Administrator PIN for Unlocking,
settings, operations etc. and only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong PINs for 5 times.
AA A
AA A
AA A
AA A
Low Consumption
Zigbee broadcasting turns to sleep mode if no
operations.
OTA Upgrade
Upgrade online, Fix bugs,
Update functions and optimize user experience.
.......
Features

Quick Start
Step 1>Install Battery
>. Slide the battery cover upand remove the battery cover.
>. Put 4 AAA batteries into the battery dock.

Step 2>Download Mobile App
>1. Scan QR Code below and download the App and turn on your mobile Bluetooth,
you can also choose to download other App supported by Tuya.
Step 3>Add Device
Connect Zigbee gateway
> 1. Click "+" and then click "Add Device"
> 2. You will see the detected device
and click "add".
> 3. Connecting, you need to wait for a few seconds to let it
finish.
> 4. Device added

05/16
>1. Press and hold the reset button of the door lock to beep 11 times and the light
on the touch panel starts to flash on the same time, then release it., and then
the door lock is ready to pair
Add a smart lock on the gateway page
>2. Click “Add subdevice”
>3. Click “LED already blink”
>4. You will see the detected device and click the device, device will be added
successfully after a few seconds

App Instructions
How to unlock:
10/16
System Lockdown
Reset Factory Mode
Long press the reset button for 5 seconds
Door lock will Lockdown for 5 minutes if entering wrong password continuously 5 times
Virtual digits-Anti Peeping
Add any digits before and after the correct password the doorlock unlock as always
Other Functions:
You will see all devices on the home page.
Tap the L5 Zigbee Door lock to start operating.
Long press the unlock button on the APP to unlock
How to get Temporary code:
Tap “ unlock ways ”
How to get Temporary code:
T
T
a
ap
p “+” and then choice temporary lock
TTaapp “Dynamic password “and then click “get password “which is valid for 5 minutes.

12/16
How to add Members:
Tap “ unlock ways ”
Tap “+” and then choice family lock
Member will receive an invitation on the App, after he/she accept it, Admin can find the
member in the list.
Click the member you want to set and then add fingerprint, password or card
Tap “ Begin add ” and then press the fingerprint area repeatedly according to the voice prompt,
Add Fingerprint
wait for the device to collect the fingerprint information
Select the fingerprint you wish to delete and then click “ Delete Fingerprint", the
fingerprint deleted successfully
Deleted Fingerprint
Tap “ Begin add ” and then Then enter the password you want to set according to the voice prompt,
Add Password
enter the "password" + "#" to be set, and enter "password" + "#" again,
Select the Password you wish to delete and then click “ Delete Password", the password
deleted successfully
Deleted Password
Add Card
Tap “ Begin add ” and then put the card on the identified area according to the voice prompt,

Select the card you wish to delete and then click “ Delete Card", the card deleted
successfully
Deleted Card
Scene Management:
Tap Scene on the homepage
You can choose the scene you need to trigger linkage
Tap on homepage
You can see the warnings records from different scene
Tap records
How to check Opening Log:
You will find out when and whom opened the door lock.

31 Building, Shahe Rd, Longgang District, Shenzhen 518115, China Copyright @ 2016 - 2022 OMFOCUS TECH. All rights reserved.
www.omconnect.com / www.omuark.com
Questo manuale è adatto per i seguenti modelli
1
Indice

















