MAIN MENU
mgives access to the main menu. The menu consists of a single line, in the button of the
display. When chosen, different receiver options are available.
Adjustment in this menu is required only under installation.
Pressing mrepeatedly gives access to adjust:
•Auto Standby.
This should be set to off.
•Factory reset.
Starts a factory reset of the receiver, clearings channels etc.
It does not reset the OneRemote controller settings.
•Channel search.
A channel search can be initiated, auto or manually.
OPTIONS
The OneRemote CableRadio1 option programming is only required during the initial installation
and it is carried out with a Bang & Olufsen remote.
Options are used to activate or de-activate various special functions. Thus, it might be necessary to
add several options, in which case they are added one by one.
An option programming MUST be initiated by pressing Lwithin the FIRST 8 seconds, after
12V power has been applied to CableRadio1. Hereafter 8 Seconds are available to enter each
following key, so there is no rush.
At any time, simply enter the 5 keys of the Option starting with L, and the option will
immediately be active.
