ONE MK-E18 Manuale utente
USER
MANUAL
VERSION 2.0
PRODUCT: COLD SPARK MACHINE
MODEL: MK-E18
USER MANUAL (MK-E18)
1
1. PRECAUTIONS
Dear customers:
Thanks for choose our cold spark machines, pls read the user
manual careful before used to get better user experience.
1)Due to the manual content limited, pls understand missed some
of detail and safety direction in using, and not undertake the
responsible of the use result for missing.
2)We will continue to focus on products’ research, development
and technical improvement to create better experience effects，so
we reserve the right to make changes to the products, not do
inform, the manual just for your reference, the nal based on the
products you received.
Package Contents
1 x spin spark machine;
1 x remote controller;
1 x power cord;
1 x signal cable.
2
2. Product diagram
，
Working Height 1-5m Control mode DMX
Fountain direc-
tion
360° Housing material Aluminum
Working Tem-
perature
-10-50， N.W 20kgs
Power 1300W Dimension 365*365*400mm
Fuse 110V/16A,
220V/10A Warranty 1 year
Interface Double DMX input,
Double AC power
1Display 4Power port 7Spray hole
2Parameter
label 5 Power switch 8Powder hole
3DMX port 6Fuse
AMAZING BOOSTER FOR STAGE
USER MANUAL (MK-E18)
3
3. Operation Panel
1)LCD Display Area，
1---Means nozzle 1 fountain, the following number is heating temp. of nozzle 1.
DMX/RF---Show “DMX”, then be controlled by console, the following number is
DMX address code; If show “RF”, then in remote control mode.
RPM---Spinning speed, the following number is R/M(within 60-100).
2--Means nozzle 2 fountain, the following number is heating temp. of nozzle 2.
2)Control Button Area:
MENU: menu DOWN: down
UP: up
ENTER: conrm and save
Press ENTER each time you make a selection
4
3)Indicator Description
READY: Green light When the “READY” green light always light
on, can start to do fountain.
DMX:Blue light Flashing shows that DMX signal is connected,
otherwise no signal.
FAULT: Yellow light: The light is on with any malfunction.
HEAT: Red light When the machine is heating, signal light is on;
once reach to working temp., will light off.
Operation Instructio Please ensure sufcient consumables
before use; After added consumables, cover the rubber plug (don’t
add to wrong fountain
hole)
This product support DMX console and remote control two
operation modes.
AMAZING BOOSTER FOR STAGE
USER MANUAL (MK-E18)
5
1)DMX 512 Operation :
1.The machine adopts 3-pin signal wire connection, with DMX IN
and DMX OUT double interfaces, which can be used for multiple
connections and is suitable for standard 512 signal control.
DMX control included two channel modes (common mode occupied
2 channel, professional mode occupied 4 channel).
2-channel common mode
1st channel Function
0-10 Pre-heat turn off
11-220 Emergency stop
221-239 Clear Powder
240-255 Pre-heat turn on
2nd channel Function
0-15 Fountain off
16-55 Not spin, Fountain 1
56-95 Not spin, Fountain 2
96-135 Not spin, Fountain 3
136-175 spin, Fountain 1
176-215 spin, Fountain 2
216-255 spin, Fountain 3
6
4-channel common mode
1st channel Function
0-10 Pre-heat turn off
11-220 Emergency stop
221-239 Clear Powder
240-255 Pre-heat turn on
2nd channel Function (Nozzle 1)
0-15 Nozzle 1 fountain off
16-31 Not spin, Fountain 1
64-111 Not spin, Fountain 2
112-159 Not spin, Fountain 3
160-207 Not spin, Fountain 4
208-255 Not spin, Fountain 5
216-255 spin, Fountain 3
3rd channel Function (Nozzle 2)
0-15 Nozzle 2 fountain off
16-31 Not spin, Fountain 1
AMAZING BOOSTER FOR STAGE
USER MANUAL (MK-E18)
7
64-111 Not spin, Fountain 2
112-159 Not spin, Fountain 3
160-207 Not spin, Fountain 4
208-255 Not spin, Fountain 5
4th channel Function (Spinning adjust)
0-15 Not spin
16-135 Clockwise spin (60-100BPM)
8
2.Console operation
1.，，，Connect the power cable and DMX signal cable of machine, turn
on green power button, DMX blue indicator light keep in ashing,
means DMX signal connected successful.
，2.The rst channel push to top start heating, till the green
indicator light always in lighting, then can do fountain.
AMAZING BOOSTER FOR STAGE
USER MANUAL (MK-E18)
9
1.Power(remote signal connect/unconnected): short press 1s con-
nect to machines, the display will show from “DMX” become to
“RF” if connected successful; long press 3s unconnected, display
show “DMX”.
2.HEAT ON/OFF: after 1s do heating, red indicator will light, dis-
play will show dynamic temperature value, till green indicator al-
ways keep light on, then nished heat.
3.Press spray buttons do spray effects.
4.CLE (clear powder): Press CLE, then machine do clear powder
30s, press HEAT button if need stop. (The operation clear powder
refer to item six)
5.STOP: stop doing spray.
Consumables
1)The consumables are classified as:
SMALL: the spark fountain height 1.0-3.5m (error 0.5m), and the
spot is rarely dropped,use for indoor.
LARGE: the spark fountain height 2.0-5.0m (error 0.5m), and the
sprayed spot has dropped ground,use for outdoor.
2)Consumables choice: Consumables are the customized for-
mula for the test of our machines. Please select our consumables
to avoid affecting the effect of the machine; (No warranty service
is provided for machines damage caused by consumables not from
our company).
3)Consumables save: Consumables should be kept in a dry and
sealed environment to prevent moisture.(wet and sundry consuma-
bles should not be used)
4)Consumables add: Pls stop running the machines before add
the consumables, to avoid accidental injury.
Indice
Altri manuali ONE Attrezzatura per DJ
