OneTouch Select Manuale utente
Select™
USER GUIDE
Blood Glucose Monitoring System
Replaces Owner’s Booklet
AW 06659902A
Rev. date: 05/2012
AW 06659902A
Getting to know your system 1
Setting up your meter 4
Testing your blood glucose 8
Attaching meal flags to your results 16
Reviewing past results and averages 18
Control solution testing 20
Caring for your system 22
8Troubleshooting and detailed
information about your system 24
Contents:
For further information, please contact your authorized
local LifeScan representative.
You may also visit us at
www.LifeScanMEA.com.
LifeScan Europe
Division of Cilag GmbH
International
6300 Zug
Switzerland
Meter Made in China
© 2010 LifeScan, Inc.
LifeScan self-test blood glucose monitoring devices conform to the following EU Directives:
IVDD (98/79/EC):
Blood Glucose Meter, Test Strips, and Control Solution
MDD (93/42/EEC):
Lancets
Blood Sampler
0120
0120
Before you begin
Before using this product to test your blood glucose, carefully read this User Guide and the inserts that come with the OneTouch® Select™
Test Strips and OneTouch® Select™ Control Solution. Take note of warnings and cautions throughout this booklet, which are identied
with . Many people nd it helpful to practice the test with control solution before testing with blood for the rst time. See Section 6,
Control solution testing.
Intended use
The OneTouch® Select™ Meter Blood Glucose Monitoring System is intended to be used for the quantitative measurement of glucose
(sugar) in fresh capillary whole blood. The OneTouch® Select™ Meter System is intended for self-testing outside the body (in vitro
diagnostic use) by people with diabetes at home and by health care professionals in a clinical setting as an aid to monitor the
eectiveness of diabetes control. It should not be used for the diagnosis of diabetes or for testing newborns.
Test principle
Glucose in the blood sample mixes with special chemicals in the test strip and a small electric current is produced. The strength of this
current changes with the amount of glucose in the blood sample. Your meter measures the current, calculates your blood glucose level,
displays the result, and stores it in its memory.
NOTE: If you have questions about your OneTouch® Select™ Meter Blood Glucose Monitoring System, contact Customer Service.
1
GETTING TO KNOW YOUR SYSTEM
Getting to know your system
The OneTouch® Select™ Meter Blood Glucose Monitoring System
INCLUDED WITH YOUR KIT:
a. OneTouch® Select™ Meter (battery included)
b. OneTouch® Lancing Device
If another type of lancing device was included,
see the separate instructions that came with
that lancing device.
c. Sterile Lancet
d. Carrying Case
e. OneTouch® Select™ Test Strips
If any of these items are missing from your kit,
call Customer Service.
AVAILABLE SEPARATELY:
f. Clear Cap
g. OneTouch® Select™ Control Solution
a
bc
d
WARNING: Keep the meter and testing supplies away from young children. Small items such as the battery door,
battery, test strips, lancets, protective covers on the lancets, and control solution vial cap are choking hazards.
Do Not ingest or swallow any items.
f
e
g
For availability of control solution,
call Customer Service. You may also
visit us at www.LifeScanMEA.com
or ask for control solution where
you obtain your test strips.
2
GETTING TO KNOW YOUR SYSTEM
Getting to know your system
TEST STRIP
Edge to
apply sample
Conrmation
window
Contact bars
Insert into test port
METER
Display
Up and down buttons
Select or change information
mg/dL is the pre-set
unit of measure
▲▼ indicates selection
available using up or
down button
Test port
Insert test strip here to
turn meter on for testing
OK button
Turns the meter on/o
Conrms menu selections
3
GETTING TO KNOW YOUR SYSTEM
Turning your meter on
There are two ways to turn your meter on:
To perform a test, insert a test strip as far as it will go. The meter will briey
perform system checks, then the display will turn on.
or,
With the meter turned o, press and hold for two seconds to access
MAIN MENU.
Check that the screen shows solid black for two seconds. If it does, the display is working properly. If the meter does not
power on, try changing the meter battery. See Replacing the battery in Section 7.
Turning your meter o
There are several ways to turn your meter o:
• Press and hold for three seconds.
• Your meter will turn o by itself if left alone for two minutes.
• Go to MAIN MENU and press or to highlight METER OFF, then press .
• Before or after completing a test, remove the test strip. If you advance from the test result screen to the MAIN MENU by
pressing , removing the test strip will not turn the meter o. Use one of the three methods above.
CAUTION: If you see any light areas
within the black start-up screen, there
may be a problem with the meter. Call
Customer Service.
4
SETTING UP YOUR METER
Setting up your meter
Setting the meter language, date and time
You can change many of the settings that came pre-set with your meter. Before using your meter for the rst time or if you change the
meter battery, you should check and update these settings. Make sure you complete steps 1 through 6 below to ensure your desired
settings are saved.
Turn the meter on
With the meter turned o, press and hold for two seconds to access MAIN MENU.
Get to the SETTINGS screen
When using the meter for the rst time, or after changing the meter battery, you will automatically start
in the SETTINGS screen.
In other cases, from the MAIN MENU, press or to select SETTINGS and press . Then, press
or to select METER SETTINGS. To conrm your selection, press .
You may also select MENU and press to return to the MAIN MENU. See Section 4, Attaching meal ags
to your results for information on the FLAGS/COMMENTS feature.
The pre-set language, date, time and unit of measure appear on the display. If they are correct,
press to return to the MAIN MENU.
If the language, date, or time are not correct, select CHANGE and press .
Choose a language
Now press or to highlight the language of your choice and press .
NOTE: If you select the wrong language, press and hold for three seconds to turn the meter o.
Then, turn the meter back on and re-start from step 1.
METER OFF
MAIN MENU
LAST RESULT
ALL RESULTS
AVERAGES
SETTINGS
MENU
SETTINGS
METER SETTINGS
MEAL FLAGS
ENGLISH
18/OCT/07
11:48 AM
mg/dL
OK
CHANGE
SETTINGS
FRANÇAIS
ENGLISH
LANGUAGE
5
SETTING UP YOUR METER
Set the date
In the DATE AND TIME screen, press or to change the year and press .
Press or to change the month and press .
Press or to change the day and press .
Set the time of day
Press or to set the hour and press .
Press or to set the minutes and press .
Press or to set AM or PM and press .
NOTE: The date and time formats have been pre-set. You cannot change these settings.
Confirm your settings
OK will be highlighted near the bottom of the screen. If your settings are correct, press to conrm
and save the settings and return to the MAIN MENU.
If you want to cancel your settings and start the settings process over again, press or to highlight CHANGE and press . You will be
returned to the LANGUAGE screen.
DATE AND TIME
TIME:
11 : 48 AM
DATE:
18 / OCT / 2007
DATE AND TIME
DATE:
18 / OCT / 2007
TIME:
11 : 48 AM
ENGLISH
18/OCT/07
11:48 AM
mg/dL
OK
CHANGE
SETTINGS
WARNING: The unit of measure mg/dL must be displayed here. If your display shows mmol/L rather than mg/dL,
contact Customer Service. You cannot change the unit of measure. Use of the wrong unit of measure may cause you to
misinterpret your blood glucose level, and may lead to incorrect treatment.
6
SETTING UP YOUR METER
Coding your meter
Check the code on the test strip vial before inserting the test strip
Code numbers are used to calibrate your meter with the test strips you are using.
Insert a test strip to turn on the meter
Remove a test strip from its vial and recap the vial immediately. With clean, dry hands, you may touch the
test strip anywhere on its surface. Do Not bend, cut or modify the test strips in any way. Use each test strip
immediately after removing it from the vial. Insert the test strip into the test port as shown. Make sure the
three contact bars are facing you and the arrow is pointing down. Push the test strip in as far as it will go.
After the black start-up screen appears, the meter will display the code from your last test.
If a ashing “– –” appears instead of a code number, such as when you are rst using the meter,
follow the instructions in Step 3 to change to a numerical code.
MATCH CODE
25
7
SETTING UP YOUR METER
CAUTION: Matching the code on the meter and the code on the test strip vial is essential to obtaining accurate results.
Each time you test, check to make sure the code numbers match.
Match the code on the meter with the code on the test strip vial
If the code on the meter does not match the code on the test strip vial, press or to
match the code number on the test strip vial. The new code number will ash on the display
for three seconds, then briey stop ashing, after which the display will advance to the
APPLY SAMPLE screen.
If the codes already match, press to go to the APPLY SAMPLE screen. When you do not
make a change after ve seconds, the display will advance to the APPLY SAMPLE screen.
The meter is now ready to perform a blood glucose test.
NOTE:
• If the APPLY SAMPLE screen appears before you are sure the codes match, remove the test strip, and re-start from step 1.
• If you change APPLY SAMPLE to APPLY CONTROL by mistake, press to change it back to APPLY SAMPLE.
APPLY SAMPLE
▲
Altri manuali per Select
2
Indice
Altri manuali OneTouch Misuratore di glicemia
OneTouch
OneTouch ONETOUCH SELECT - CONTROL SOLUTION Guida di sicurezza
OneTouch
OneTouch ONETOUCH SELECT - CONTROL SOLUTION Manuale utente
OneTouch
OneTouch Verio Flex Manuale utente
OneTouch
OneTouch VERIOPRO + Manuale
OneTouch
OneTouch UltraMini Manuale utente
OneTouch
OneTouch FASTTAKE Manuale utente
OneTouch
OneTouch UltraMini Manuale utente
OneTouch
OneTouch Vario Flex Manuale utente
OneTouch
OneTouch ULTRA2 Manuale utente
OneTouch
OneTouch ONETOUCH ULTRASMART Manuale utente
OneTouch
OneTouch Verio Manuale utente
OneTouch
OneTouch ULTRALINK - ADDENDUM Manuale utente
OneTouch
OneTouch Ping Manuale utente
OneTouch
OneTouch UltraMini Manuale utente
OneTouch
OneTouch VERIO SYNC Manuale utente
OneTouch
OneTouch Verio IQ Manuale utente
OneTouch
OneTouch ONETOUCH SELECT - CONTROL SOLUTION Manuale utente
OneTouch
OneTouch Verio Reflect Manuale utente
OneTouch
OneTouch UltraMini Manuale utente
OneTouch
OneTouch ONETOUCH ULTRASMART Manuale utente
