Onlogic NWK030 Manuale utente

NWK030: Cat M1 / NB-IoT Modem

Revision Date 2019.09.06

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 85 2733760

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Revision Date 2019.09.06

NWK030 Product Manual

Revision Date 2019.05.02 .............................................................................................

Preface............................................................................................................2

Important Notices and Warnings .....................................................................................3

Important Notice .....................................................................................................3

Limitation of Liability ..................................................................................................3

Safety and Hazards ...................................................................................................3

Introduction .......................................................................................................4

System/Product Overview ...........................................................................................5

Specications ........................................................................................................5

Product Information ................................................................................................6

Dimensions ..........................................................................................................6

Pin Connectors .......................................................................................................6

Initial Setup........................................................................................................9

Firmware Update .....................................................................................................9

USB Update Application ...............................................................................................9

Firmware Update via AT Commands.....................................................................................10

Procedure for FOTA Over HTTP .........................................................................................10

Procedure for FOTA Upgrade via UFTP Method ...........................................................................11

Technical Functions.................................................................................................12

Connecting to Modem via PuTTY (Windows) ..............................................................................12

Connecting to Modem via Minicom (Ubuntu) .............................................................................12

AT Commands .....................................................................................................13

Code Examples & Other Useful Resources .............................................................................15

Troubleshooting....................................................................................................15

Known Limitations ....................................................................................................15

Check Internet Connectivity (TCP) .......................................................................................15

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Title

Subtitle

Copy.

Preface

About OnLogic

OnLogic is powering innovation with highly congurable embedded and IoT computers engineered for

reliability. Businesses worldwide depend on our solutions to operate in the toughest environments while

tapping into the evolving Industrial Internet of Things.

This guide will introduce you to the NWK030 modem and walk you through setup and installation. For

technical questions or support, please reach out via our contact information below or visit our NWK030 Tech

Support site at: https://www.onlogic.com/support/documentation/getting-started-with-the-nwk030/ .

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed,

corrupted (i.e., have errors) or be totally lost. Although signicant delays or losses of data are rare when wireless devices such as the

Extrovert family of products are used in a normal manner with a well constructed network, the Extrovert family of products should not

be used in situations where failure to transmit or receive data could result in damage of any kind to other equipment, the user or any

other party, including but not limited to personal injury, death or loss of property. OnLogic accepts no responsibility for damages of any

kind resulting from failures, delays or errors in data transmitted or received. The purchase and use of the Extrovert family of products

does not come with or constitute a wireless or data plan. A separate plan with your carrier is required.

Limitation of Liability

The information in this manual is subject to change without notice and does not represent a commitment on the part of OnLogic.

OnLogic AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL,

CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR

ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY OnLogic PRODUCT, EVEN IF OnLogic AND/OR

ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD

PARTY.

In no event shall OnLogic and/or its aliates aggregate liability arising under or in connection with the OnLogic product, regardless

of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the OnLogic

product.

Safety and Hazards

CAUTION: For your own safety and to ensure continued proper operation, Extrovert products should not be used where explosive

atmospheres may be present or where radio interference may cause damage to, or disruption in service from, other equipment.

IMPORTANT NOTE: Maintain at least 20 cm of separation between the LTE antenna and the user’s body while in regular operation. Do

not use Extrovert products in the vicinity of medical equipment as it may cause potentially disruptive interference.

Do not co-locate an Extrovert-enabled device with any other transmitting system.

To comply with FCC/IC regulations in North America that limit both maximum RF output power and human exposure to RF radiation

(SAR), the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the limits outlined in the

table on the following page.

Important Notice

Important Notices and Warnings

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Important Notices and Warnings (cont.)

Device Technology Bands Uplink Frequencies (MHz) Downlink Frequencies (MHz) Maximum Antenna gain (dBi)

NWK030 LTE 2 1850 - 1910 1930 - 1990 7

4 1710 - 1755 2110 - 2155 6.75

5 824 - 849 869 - 894 4.41

12 698 - 716 728 - 746 3.66

13 777 - 787 746 - 756 3.94

Introduction

The NWK030 is based on the SARA-R410M module and provides a single RF interface for connecting the external antenna.

“Cellular” represents the primary RF input/output for transmission and reception of LTE RF signals. The “Cellular” pin of NWK030 has a

nominal characteristic impedance of 50 Ω and must be connected to the primary Tx / Rx antenna through a 50 Ω transmission line to

allow proper RF transmission and reception.

When installed in a OnLogic computer, the “Cellular” interface is connected to an external antenna mount. The external mount uses an

SMA (female) connector. Our line of compatible cellular antennas all use a standard SMA (male) connector.

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

System/Product Overview

SKU NWK030

Carriers Verizon

Connectivity LTE, SMS, GSM, VoLTE

Bands LTE:

FDD Bands Ch 2, 3, 4, 5, 8, 12, 13, 20, 28

3GPP Release 13 LTE Cat M1

3GPP Release 13 LTE Cat NB1

Coverage Enhancement Mode A

Rel 12 LTE Power Save Mode, PSM

Rel 13 e-DRX

Cat M1 Half-duplex (375 kbit/s DL and UL)

Cat NB1 Half-duplex (27.2 kbit/s DL, 62.5 UL)

Cat NB1 Non-IP Data Delivery

GSM:

EGPRS Power class E2

SMS:

MT/MO PDU / Text mode

SMS over SG/NAS1

VoLTE:

Codec: AMR-WB

Data Rate

Cat M1 Half-duplex:

(300 kbit/s DL, 375 kbit/s UL)

NB-IoT:

(27.2 kbit/s DL, 62.5 kbit/s UL)

Interface Mini PCIe (Half and Full Height)

SIM Card Socket Size 3FF (Micro-SIM)

Signal Type USB 2.0 (on Mini PCIe)

Expansion Options SIM Card Socket

PCIe Mini Card (Half and Full Height)

Operating Temp. Range -40°C ~ 85°C

Drivers Supported Ubuntu

Windows 10

Regulatory Information GCF, PTCRB, CE Europe, FCC US, ISED Canada,

RoHS

Protocols Dual stack IPv4 and IPv6

Embedded TCP/IP, UDP/IP, FTP, HTTP

Embedded MQTT, CoAP

Embedded HTTPS, FTPS, TLS

Firmware Upgrade Via UART and USB

Via FOTA

Operating Voltage

Power Input VCC_3V3 Minimum: 3v Maximum: 5.5v

Serial 1 UART

1 USB 2.0 (high speed, 480 Mb/s)

Features Power Save Mode

Embedded TCP/UDP stack

eDRX

Embedded HTTP, FTP

Antenna Supervisor

Dual stack IPv4 / IPv6

Embedded HTTPS, FTPS, TLS

FW update over the air (FOTA)

U(SIM) Supports 1.8 and 3 V, SIM toolkit

Specications

The OnLogic NWK030 is based on the PCI Express Mini Card standard with a USB 2.0 interface.

The NWK030 is an available option within OnLogic’s full range of industrial PCs. See www.onlogic.com to select your PC platform. Add

Cat M1 / NB-IoT connectivity during the system conguration stage. The NWK030 is not available for individual sale as a component.

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Product Information

Dimensions

Pin Connectors

Micro SIM card

Socket

Full/Half size

Cutting Line

Cat M1 / NB1 U.FL-R-

SMT-1 Socket

Pin 1 Pin 52

Pin 2

Pin 51

50.95 mm

30 mm

26.8 mm

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Pin Connectors (cont.)

Product Information (cont.)

PIN Name Input/Output Description

1 GPIO2 Output Module status indication SARA-R4 pin23

2 VCC_3V3 Power Power Input

3 NC Not Connected

4 GND Power Ground

5 NC Not Connected

6 GNSS_TXD Output +1.8V UART GNSS data output EVA-M8M-0 pin16

7 PWR_ON Input Power-on / power-o input SARA-R4 pin15

8 SIM_VCC External SIM signal — Power supply for the SIM

9 GND Power Ground

10 SIM_IO Input/Output External SIM signal — Data I/O

11 V_INT Output +1.8V UART GNSS data output SARA-R4 pin4

12 SIM_CLK Output External SIM signal — Clock

13 UART_DSR Output UART data set ready SARA-R4 pin6

14 SIM_RST Input External SIM signal — Reset

15 GND Power Ground

16 NC Not Connected

17 GNSS_RXD Input +1.8V UART GNSS data output EVA-M8M-0 pin15

18 GND Power Ground

19 NC Not Connected

20 W_DISABLE_N Hi or Open: Enable the Power

Low: Disable the power

21 GND Power Ground

22 RESET_N Input SARA-R4 External reset input SARA-R4 pin18

23 UART_RXD Input +1.8V UART data output SARA-R4 pin12

24 VCC_3V3 Power Power Input

25 UART_RTS Output +1.8V UART clear to send SARA-R4 pin11

26 GND Power Ground

27 GND Power Ground

28 UART_CTS Input +1.8V UART ready to sent SARA-R4 pin10

29 GND Power Ground

30 UART_DCD Output +1.8V UART data carrier detect SARA-R4 pin8

31 UART_TXD Output +1.8V UART data output SARA-R4 pin13

32 NC Not Connected

33 GPIO1 RESERVED pin SARA-R4 pin16

34 GND Power Ground

35 GND Power Ground

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

Product Information (cont.)

Pin Connectors (cont.)

PIN Name Input/Output Description

36 USB_DN Input/Output USB Data Negative

37 GND Power Ground

38 USB_DP Input/Output USB Data Positive

39 VCC_3V3 Power Input

40 GND Power Ground

41 VCC_3V3 Power Input

42 LED_WWAN Output Default: high impedance;

LED setting ash via AT command port

AT+UGPIOC=16,2

43 GND Power Ground

44 GPIO5 Input SIM detection SARA-R4 pin42

45 NC Not Connected

46 UART_DTR Input +1.8V UART data terminal ready SARA-R4 pin9

47 NC Not Connected

48 V_BCKP Input Real Time Clock Backup supply EVA-M8M-0 pin21

49 NC Not Connected

50 GND Power Ground

51 NC Not Connected

52 VCC_3V3 Power Power Input

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Cat M1 / NB-IoT Modem

NWK030

A SIM inserted into the Modem will automatically congure to the SIM’s respective network. The connection can be veried by checking

the APN using the command ‘AT+CGDCONT?’. The APN will be congured on Class 1 by default. Connectivity can be veried using a

data test of supported protocol tests outlined in the AT command section or by using the dierent connectivity AT commands outlined

in the AT manual.

Firmware Update

Customers can check for device rmware updates through OnLogic’s NWK030 product page. When rmware is available, end users

can perform Firmware Over The Air (FOTA) updates to download and ash rmware. Both methods can be aided with applications or

performed within a PuTTY session using the relevant AT commands.

When rmware is available, User can perform a FOTA update via HTTP. The rmware will be hosted at www.onlogic.com/nwk030/.

A FOTA upgrade package is delivered as two phases:

• fwA_to_fwB-Phase1.pkg

• fwA_to_fwB-Phase2.pkg

In the Phase 1 package, the FOTA Update Agent is updated from a full le to delta le Agent. In the Phase 2 package, the remaining

rmware changes are executed. This two package method substantially reduces the overall package size.

USB Update Application

1. Download the Easy Flash application and Firmware Image File.

2. Make sure the Easy Flash application and the .dof Firmware Image le are in the same directory.

Initial Setup

3. Launch the Easy Flash utility as Administrator

4. Select the following options:

Product: SARA-R4

Port: USB

Baud rate: 921600

5. Hit Start and follow instructions provided

US Oce

Phone: +1 802 861 2300

Email: [email protected]

www.onlogic.com

EU Oce

Phone: +31 088 5200 700

Email: [email protected]

www.onlogic.com

Indice

Altri manuali Onlogic Modem

Onlogic

Onlogic NWK100 Manuale utente

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente