Oontz Bluetooth Adapter Gen 1 Manuale utente
Quick Start Guide
TheOontZ.com
Designed and Engineered By
In the Package
Quick-Start Guide
Micro USB Power Adapter
3.5mm Audio Cable
Digital Audio Optical Cable
Thank you for being an OontZ Bluetooth Adapter Owner!
This User Guide rst covers the steps to connect your OontZ Bluetooth Adapter to your TV or
device (Laptop, Computer, Tablet, Mac, iPad, or Music Receiver), with the included Digital
Audio Optical Cable or the 3.5mm Audio Cable. Then the steps to connect the OontZ
Bluetooth Adapter wirelessly over Bluetooth to one or two of these Supported OontZ Speaker
Models:
SUPPORTED OONTZ SPEAKER MODELS
- OontZ Angle 3 ULTRA
- OontZ Angle 3XL ULTRA
- OontZ Angle 3 RainDance
• To connect and play to two OontZ Speakers both speakers must be the same model.
• The OontZ Bluetooth Adapter will only work with the Supported OontZ Speaker
Models, for the latest list of supported OontZ speakers please visit
TheOontZ.com/BT-Adapter
The OontZ Bluetooth Adapter is designed to transmit the audio from your TV or device to the
OontZ Speaker(s) with our Low latency Feature. The Low Latency Feature reduces delays that
occur in the Bluetooth transmission of the audio which can cause lip sync issues when playing
a video on your TV or device and playing the audio wirelessly through one or two OontZ
Speakers.
Before Getting Started with your OontZ Bluetooth Adapter please
review these important notes:
OontZ Speaker Firmware Version Requirements
Your OontZ Speaker(s) need to be on the current version of Firmware, to work with the OontZ
Bluetooth Adapter:
Current Firmware Requirements
- OontZ Angle 3 ULTRA: Version 2.15 or later (please see page 19 for instructions on how to check
Firmware Version)
- OontZ Angle 3XL ULTRA: Version 3.3.6 or later (please see page 20 for instructions on how to
check Firmware Version)
- OontZ Angle RainDance: All versions of Firmware work with the OontZ Bluetooth Adapter
If your OontZ Speaker(s) are on an earlier Firmware version, you will need to update each speaker to
the current Firmware version. If you have two OontZ Speakers, they both need to be on the same
current version of Firmware.
Volume Control
Some model TVs (and other devices) when connected to the OontZ Bluetooth Adapter are not able
to adjust the volume playing through the OontZ Speaker(s) by the TV’s remote control or physical
buttons on the TV. In this case you will need to use the volume buttons on each speaker to adjust
the volume. If your TV allows the volume playing through the OontZ Speakers(s) to be adjusted
from the TV’s remote control we would recommend that you initially set the volume on each
speaker to maximum using the volume buttons on each speaker and use the remote control to
adjust volume.
Buttons and Lights
Connectors
Connecting with Television Using Digital Audio Optical Cable
Connecting with Television Using 3.5mm Audio Cable
Connecting with Devices Using 3.5mm Audio Cable
Turning On the OontZ Bluetooth Adapter
Connecting Your OontZ Bluetooth Adapter with One Supported OontZ Speaker
Connecting Your OontZ Bluetooth Adapter with Two Supported OontZ Speaker
Play Your Audio Wirelessly in Dual Stereo
Play Your Audio Wirelessly with Left-Right Stereo Separation
Changing Between Left Channel-Right Channel and Dual Stereo
Troubleshooting
Reset Function
Checking OontZ Angle 3 ULTRA Firmware Version
Checking OontZ Angle 3XL ULTRA Firmware Version
Other Important Notes
Contacting Customer Support
Safety and Precautions
Table of Contents
1
2
3
4
5
6
7 - 9
10 - 12
13
14
15
16 - 17
18
19
20
21
22
23 - 24
Pages
SPK 2 (Speaker 2)
Blue Indicator Light
Buttons and Lights
Page 1
Bluetooth Button
L/R White Indicator Light
- Lit when connected to
two OontZ Speakers in
Left-Right Channel Mode
for stereo separation
SPK 1 (Speaker 1)
Blue Indicator Light DS Orange Indicator Light
- OontZ Speaker(s) are in
Dual Stereo Mode,
speaker(s) will play full
stereo
Speaker Mode Button
- Used when connected to
two OontZ Speakers to
change between Dual Stereo
Mode and Left - Right
Channel Mode
SPK 2 (Speaker 2)
Blue Indicator Light
Connectors
Page 2
Optical/Audio In Connector used
for 3.5mm Audio Cable or
Digital Audio Optical Cable
DC IN Power Connector
used for Micro USB Power
Adapter
Connecting with Television Using Digital Audio Optical Cable
Page 3
- Plug the longer end of the Digital Audio Optical Cable into the Optical/Audio
In Connector on the OontZ Bluetooth Adapter as shown below.
- Plug the shorter end of the Digital Audio Optical Cable into the Optical -
Digital Audio Out on your TV as shown below.
- Make sure both ends of the cable are fully inserted.
We recommend to connect to your TV using the Digital Audio Optical Out Connector. If the TV does
not have a Digital Audio Optical Out Connector, use the Analog Audio Connection as described on
Page 4.
ANALOG
AUDIO OUT
L R
DIGITAL
AUDIO OUT
OPTICAL
Digital Audio Optical Cable is included
AUDIO
OUT
Connecting with Television Using 3.5mm Audio Cable
Page 4
- Plug one end of the 3.5mm Audio Cable into the Optical/Audio In Connector on the OontZ
Bluetooth Adapter.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out Connector on
your television.
- Make sure both ends of the cable are fully inserted.
-If your TV does not have a Headphone Connector or Audio-Out Connector but does have Left
Right Analog Audio Out you will need a 3.5mm to RCA cable as shown below.
ANALOG
AUDIO OUT
L R
3.5mm to 3.5mm Audio Cable (included)
OR
3.5mm to RCA audio cable is sold seperately
and is available at:
TheOontZ.com/accessories
AUDIO OUT
HEADPHONE
OUT
- or -
DIGITAL
AUDIO OUT
OPTICAL
L
R
Connecting with Devices Using 3.5mm Audio Cable
Page 5
- Plug one end of the 3.5mm Analog Cable into the Optical/Audio In Connector on the OontZ
Bluetooth Adapter.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out Connector on your
device.
- Make sure both ends of the cable are fully inserted.
OR
Indice
Altri manuali Oontz Adattatore
