Open Technologies NeWay Manuale utente

Open Technologies S.r.l.

EDITING

In this section are reported all the edits to the chapters of the object manual.

N° of

Chnge

N° Manual

Edition OBJECT O CHANGE DATE

0 0 Release 23/05/2017

This manual contains the use and maintenance original instructions, it is considered as part

and parcel of the machine, it must be read thoroughly before attempting any operations and it

must be kept until final disposal.

If the machine is sold the manual must go ith it.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 1 di 26

Open Technologies S.r.l.

Table of Contents

1.EC MARKING AND CON ORMITY DECLARATION.........................................................................................4

1.2.PosiTION O LabeL on the machine............................................................................................................ 4

2.CON ORMITY DECLARATION......................................................................................................................... 4

3.INTRODUCTION................................................................................................................................................ 5

4.NORM RE ERENCES....................................................................................................................................... 5

5.PRESENTATION O THE MACHINE................................................................................................................ 5

6.GLOSSARY........................................................................................................................................................ 6

7.ACCESSORIES.................................................................................................................................................. 7

8.TECHNICAL DATA........................................................................................................................................... 10

9.TRASPORTO - IMMAGAZZINAMENTO........................................................................................................... 11

1.3.Condizioni per l'immagazzinamento della macchina...................................................................................11

1.4.Indicazioni per la movimentazione.............................................................................................................. 11

1.4.1 Sollevamento...................................................................................................................................................................................11

10.MESSA IN SERVIZIO..................................................................................................................................... 12

1.5.Prescrizioni di fissaggio/ancoraggio e di smorzamento delle vibrazioni......................................................12

1.6.Spazio necessario per l'uso e la manutenzione..........................................................................................12

1.7.Condizioni ambientali consentite (temperatura, umidità, vibrazioni, radiazioni elettromagnetiche).............12

1.8.Istruzioni per il collegamento della apparecchiatura alla sua fonte di energia............................................13

1.9.Procedura di installazione software e driver...............................................................................................14

1.9.1 Proiettore.........................................................................................................................................................................................14

1.10.Indicazioni relative alla rimozione/eliminazione dei materiali di scarto......................................................15

1.11.Misure di prevenzione per l'utilizzatore..................................................................................................... 16

11.CARATTERISTICHE DELLA MACCHINA......................................................................................................17

1.12.Descrizione dettagliata della macchina..................................................................................................... 17

1.13.Descrizione dei ripari e/o dispositivi di sicurezza...................................................................................... 17

1.14.Usi non consentiti della macchina............................................................................................................. 17

1.15.Indicazioni sul rumore emesso dalla macchina.........................................................................................17

1.16.Indicazioni sulle vibrazioni, sulle radiazioni e sulle polveri emesse dalla macchina..................................17

1.17.Indicazioni sui gas e sui vapori emesse dalla macchina...........................................................................17

1.18.Informazioni sull'impianto elettrico............................................................................................................ 18

12. UNZIONAMENTO......................................................................................................................................... 19

1.19.Caricamento............................................................................................................................................. 19

1.20.Descrizione dei comandi........................................................................................................................... 20

1.21.Scarico del pezzo...................................................................................................................................... 20

1.22.Modi e mezzi di arresto............................................................................................................................. 20

1.23.Informazioni sugli usi non consentiti.........................................................................................................20

1.24.Istruzioni per l'identificazione e la localizzazione dei guasti, per la riparazione e la rimessa in moto dopo

un intervento........................................................................................................................................... 21

1.25.Istruzioni sui mezzi personali di protezione che devono essere usati.......................................................21

1.26.Istruzioni sull'addestramento richiesto...................................................................................................... 21

13.MANUTENZIONE........................................................................................................................................... 23

1.Natura e frequenza delle verifiche.................................................................................................................23

1.27.Istruzioni relative agli interventi eseguiti esclusivamente da persone qualificate (personale di

manutenzione, specialisti)....................................................................................................................... 24

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 2 di 26

Open Technologies S.r.l.

1.27.1 Impianto elettrico...........................................................................................................................................................................24

1.27.2 Morsetti..........................................................................................................................................................................................24

1.27.3 Motore elettrico..............................................................................................................................................................................24

1.27.4 Proiettore.......................................................................................................................................................................................25

1.27.5 Taratura dello strumento...............................................................................................................................................................25

14.SITUAZIONI DI EMERGENZA........................................................................................................................25

1.28.Tipo di mezzi antincendio da utilizzare.....................................................................................................25

1.29.Avvertenze sulla possibile emissione/dispersione di sostanze dannose...................................................25

15.MESSA UORI SERVIZIO............................................................................................................................. 25

1.30.Ordinaria................................................................................................................................................... 25

1.31.Smaltimento demolizione.......................................................................................................................... 25

16.RISCHI RESIDUI CONNESSI ALLA MACCHINA........................................................................................... 26

17.ALLEGATO A.................................................................................................................................................. 27

DOCUMENTS ATTACHED

 USER MANUAL OR 3D SCANNER SO TWARE

EC MARKING

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 3 di 26

Open Technologies S.r.l.

1. EC MARKING AND CONFORMITY DECLARATION

1.2. POSITION OF LABEL ON THE MACHINE

Picture 1 Position and EC marking plate

The label with EC marking is on the posterior part of the scanner.

2. CONFORMITY DECLARATION

The "conformity declaration" is found in the attachments of this manual.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 4 di 26

Open Technologies S.r.l.

3. INTRODUCTION

This manual refers to the 3D scanner and addresses the users, who, before performing any operation, use or

maintenance, must read and acquaint themselves with the material in the following pages in order to use the

machine correctly, avoiding the improper uses listed later on. Before turning the machine on make sure the user

is suitable for the job.

The manufacturer refuses any responsibility for consequences deriving from:

- Use or installation not contemplated in this manual,

- Disassembly, modifications or replacement of original parts or components with parts or

components of different origin without written agreements with the manufacturer,

- Unsuitable power supply,

- Serious inadequacy of the required maintenance

This manual reflects the technical standing at the time the machine was manufactured and it should not be con-

sidered inadequate just because based on new experiences it can be updated. The features and design of this

machine may be modified without any notice, for a constant improvement of the product.

Open Technologies S.r.l. reserves all their rights on this manual, no hole or partial reproduction is al-

lo ed ithout its ritten authorization.

4. NORM REFERENCES

In drafting this document, we have referred to what is reported in attachment I of Law n. 17 of 27/01/2010, im-

plementation of the 2006/42/EC Directive.

In the planning, construction and realization of the machine a set of technical norms has been used as refer-

ence to meet the requirements of the laws in force on the subject of safety on the job (see attachment).

5. PRESENTATION OF THE MACHINE

NeWay is a sophisticated 3D optical scanner for the no contact acquisition of three-dimensional shapes.

The technology it uses is called active stereo vision: structured light patterns are projected on the surface of the

object and acquired by two video cameras.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 5 di 26

Picture 2: NeWay Dental Scanner

Open Technologies S.r.l.

Picture 3

A) B)

3D optical scan Principle:

A) Original object to acquire

B) projection of light patterns for 3D reconstruction.

Advanced image processing algorithms retrieve depth data of the acquired surface. This approach guarantees

high performances, flexibility and fast execution.

NeWay was specifically created to operate successfully in the dental field. The whole scanning phase is totally

computerized and is performed with the aid of a mechanical rotating table that allows the acquisition of different

views of the object. Thanks to this system, you can digitize very quickly models, dies, implants, impressions, ar-

ticulators, waxups and much more.

6. GLOSSARY

The terms used in this manual have the following meanings:

-3D scanner – a machine created to acquire 3D images of opaque, solid objects;

-Bedplate – lower supporting structure, composed of screwed on steel plates;

-Rotating clasp – a support for the objects to be scanned located inside the equipment and having an inter-

mittent, rotating movement.

-Tilting – rotating table movement that allows an excursion of 40° in both directions starting from point zero.

-Optical head – the component housing the optoelectronic components (2 black and white cameras and a

DMD projector) which allow the acquisition of the object surface;

-Electric motor – actuator which rotates the rotating table;

-Electric panel – power device with a sectioning switch;;

-Exposed person – any person within the whole or part of the danger zone;

-Operator – people who have to install, operate, adjust, perform maintenance, clean, repair and transport

correctly the machine having received all the relative instructions and read this manual.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 6 di 26

Open Technologies S.r.l.

7. ACCESSORIES

Model Holder

To be inserted in the machine (held with a magnetic

lock); it has an adhesive part on which can be fixed a

dental model.

eatures the engages to adjust the reference rim.

It is included with NeWay Scanners.

Multidie Holder

To be inserted in the machine (held with a magnetic

lock); it has nine positions to fit nine dies simultaneally.

eatures the engages to adjust the reference rim.

It is included with NeWay Scanners.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 7 di 26

Open Technologies S.r.l.

Concept Quad Holder

To be inserted in the machine (held with a magnetic

lock); it has two adhesive sides to insert the quadrant

trays and 4 central positions to insert up to 4 dies at

one time.

Generic Articulator Plate

To be inserted in the machine (held with a magnetic

lock); it has two different holes to be lifted easily. It has

a sponge-like surface to avoid the articulators to slip.

Any articulator can be fixed on this plate up to a total

hight of 25 cm.

It is included with NeWay Scanners.

Articulator split cast

To be inserted in the machine (held with a magnetic

lock); 6 different bases are available, one for each

dental articulator available in the design software.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 8 di 26

Open Technologies S.r.l.

Master di Calibrazione

To be inserted in the machine (held with a magnetic

lock); it has a plane surface with white dots for cali-

brating.

It is included with NeWay Scanners.

Reference Rim

Ring to be fit on the model holder and on the multi die

support. It fixes to the bases with 3 metallic feet and

held with magnets, it gets fixed and removed manu-

ally.

It is included with NeWay Scanners.

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 9 di 26

Open Technologies S.r.l.

8. TECHNICAL DATA

General data Standard of

measurement Value

Width [ mm ] 500

Depth [ mm ] 610

Height [ mm ] 540

Total Weight (empty) [ kg ] 18

Electrical Supply Standard of

measurement Value

Single phase voltage [V] 230 c.a.

Control voltage [V] 12 c.c.

Power usage [W ] 70

Mains frequency [Hz] 50

Max amps [A] 4,72

Phases 2P+T

Edit N°: 00 - Rev. N°: 01 of 07/17/17 USE INSTRUCTIONS MANUAL

Nome file: NeWay User Manual 2017 rev01.odt Pag. 10 di 26

Altri manuali per NeWay

Indice

Altri manuali Open Technologies Scanner

Open Technologies

Open Technologies NeWay Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente