Ophit WRO-100 Manuale utente
WRO-100
Wireless Router
1 OPHIT CO., LTD.
OPHIT CO., LTD.
USER MANUAL
Model: WRO-100
Rev.1.0
WRO-100
Wireless Router
2 OPHIT CO., LTD.
Table of Contents
1. Connection
2. Operation Mode
3. Internet Settings
4. Wireless Settings
5. Firewall
6. Administration
7. Product Specification and port list of TCP/IP
8. Environmental Conditions for operation
9. Trouble shooting guide & Cleaning Instruction
10. Warranty & Warning
11. Parts
WRO-100
Wireless Router
3 OPHIT CO., LTD.
Symbol Definitions
The Following symbols appear on the product, label or the product packing.
Each symbol carries a special definition, as defined below.
Symbol
Definition
Symbol
Definition
V~
AC Voltage
Consult accompanying
documents
S/N :
Serial Number
Underwriters Lavatories(UL) Classification:
MEDICAL EQUIPMENT
WITH RESPECT TO ELECTRIC SHOCK FIRE, AND MECHANICAL
HAZARDS ONLY IN ACCORDANCE WITH UL60601-1/CAN/CSA
C22.2 No. 601.1 45MG
Indicates proof of conformity to applicable European Economic Community
Council directives and to harmonized standards published in the official journal
of the European Communities.
Tested to comply with FCC Class B standard.
This symbol indicates that the waste of electronic equipment must not be
disposed as unsorted municipal waste and must be collected separately.
Please contact the manufacturer or other authorized disposal company to
decommission your equipment.
- IEC60601-1 (EN60601-1, Safety of Medical Equipment)
- IEC60601-1-2 (EN60601-1-2, Electromagnetic Compatibility Requirements)
* Class A for Noise-emission, and Level B for Noise-immunity
WRO-100
Wireless Router
4 OPHIT CO., LTD.
Safety Instructions
Please read the following safety instructions as they are designed to prevent damage to property and
harm to the user.
“Warning”Indicates the presence of a hazard that could result in severe personal injury, death
Or substantial property damage if ignored.
An exclamation mark within a triangle is intended to alert the user to the presence of important
Operating and maintenance instructions in the manual.
Caution
“Caution”indicates the presence of the hazard that could result in minor injury, or property
Damage if ignored.
NOTE
“Note”describes information for the installation, operation, or maintenance of which is
Important but hazard related if ignored.
*This device is built to connect a medical device to medical facilities
router/routers or to network system for data transferring. WRO-100 can be
connected to medical devices wirelessly and also using LAN cable.
WRO-100
Wireless Router
5 OPHIT CO., LTD.
1. Connecting to WRO-100 Setting Page
Open Windows explorer and connect to 10.10.10.254 (WRO-100 default IP address)
Input User name/ Password
User name: admin / Password: admin
Initial Setup screen will appear as below.
WRO-100
Wireless Router
6 OPHIT CO., LTD.
2. Operation Mode
Default Value is Gateway Mode and normally changing Mode is not recommended except for Technicians
or Engineers.
WRO-100
Wireless Router
7 OPHIT CO., LTD.
3. Internet Settings
WAN
Configured when using VDSL/ADSL (Dynamic IP) or Cable modem.
NOTE
DHCP(Auto configuration)
Configured when VDSL, LAN, Cable, ADSL Service.
Dynamic IP is automatically configured form Modem, and you can check
WAN IP at Administration/Status menu.
WRO-100
Wireless Router
8 OPHIT CO., LTD.
Configured when ADSL Modem (Dynamic IP) and PPPoE Connection
(ID and Password is needed when connecting to Internet)
NOTE
PPPoE Setting
On PPPoE setting you need ID and Password.
ID and Password is delivered form ISP (Internet Service Provider).
ISP may provide IP address to connect. In this case you can input IP
Address
WRO-100
Wireless Router
9 OPHIT CO., LTD.
Static IP
Static IP Address
1. Input IP address provided by ISP
2. Click “Apply” to save.
If you do not click “Apply” data will not be saved after rebooting.
WRO-100 Wireless Feature Description
You can select SSID (Ophit) in Windows98, Me, 2000, vista, 7, 8 in the Wireless setup driver on your PC.
(Mostly you can find it on the lower right corner of you window screen, double click to configure and
activate)
Example
WRO-100
Wireless Router
10 OPHIT CO., LTD.
How to connect wireless LAN card to WRO-100 in Windows 8
If you want to activate connection on Windows 8’s wireless LAN setup refer to the below pictures in this
page.
For reference there is a Wi-Fi quick access switch on some LAPTOP/PC, you can set it on to activate
Wireless LAN or in some LAPTOP PC you can set it on by function Key.
Control Panel Network and Internet Network Connection Wireless Network Connection (Wi-Fi),
Click Mouse Right button Click Connect / Disconnect Click/Select ‘Ophit’Click Connect Button
Indice
