Oppo BDP-83 Guida rapida
BDP-83 Firmware Upgrade Instruction
The BDP-83 beta sample unit requires a firmware upgrade as new firmware versions are released to add features and fix
bugs. To upgrade to a new firmware version, please follow these steps:
1. Prepare a USB thumb drive, or a flash memory card with a USB card reader. Connect the USB drive to a computer
which you will use to download and install the firmware. The file system on the USB drive shoud be FAT, although
FAT32 generally works too. NTFS is not supported. If you use Windows, you can check the file system type by
examining the "Properties" of the USB drive.
2. Download the firmware. It should be a ZIP file. Expand the content of the ZIP into the root folder of the USB drive.
Once expanded, you should have a "UPG" folder on the USB drive. Inside the UPG folder there should be two files.
3. Unplug the USB drive from the computer. You will use this USB drive to upgrade the firmware of the BDP-83 BD
player.
4. Connect the BDP-83 BD player to a TV display. If all goes well you should see the logo screen on the TV.
5. Insert the USB drive to the USB port (front or back) of the BDP-83 player. The player will automatically detect the
USB drive and firmware. In case the player does not detect the firmware, select "Device Setup" - "Firmware Upgrade" -
"Via USB" from the setup menu.
6. With the "OK" button highlighted, press the "ENTER" key on the remote control to start the upgrade process. Make
sure the is no power interruption during the upgrade. It should take about 30 seconds.
7. Once the BD loader firmware is upgraded, the player will start upgrading the main firmware. Wait for it to start the
process automatically or press the "ENTER" button on the remote.
8. The player will start searching for the upgrade file on the USB drive. Once the firmware file is found, you will be
asked to confirm the upgrade. With the "OK" button highlighted, press the "ENTER" key on the remote control.
10. Wait for the upgrade process to complete. It should take about 20 seconds.
11. When the upgrade process is completed, unplug the USB drive from the BDP-83 player. The player will turn off
automatically.
12. When the player boots up again, check the firmware version by accessing the "Device Setup" - "Firmware
Information" menu.
This completes the firmware upgrade process.
Altri manuali per BDP-83
1
Altri manuali Oppo Lettore Blu-ray
Oppo
Oppo BDP-105D (EU) Manuale utente
Oppo
Oppo BDP-93AU Manuale utente
Oppo
Oppo BDP-105AU Manuale utente
Oppo
Oppo BDP-93EU Manuale utente
Oppo
Oppo BDP-95 Guida rapida
Oppo
Oppo udp-203 Manuale utente
Oppo
Oppo BDP-95 Manuale utente
Oppo
Oppo BDP-93 Manuale utente
Oppo
Oppo BDP-95EU Manuale utente
Oppo
Oppo BDP-105 Manuale utente
Oppo
Oppo BDP-95AU Manuale utente
Oppo
Oppo BDP-83 Manuale utente
Oppo
Oppo BDP-103 Manuale utente
Oppo
Oppo BDT-101CI Guida utente
Oppo
Oppo BDP-103EU Manuale utente
Oppo
Oppo BDP-80 Manuale utente
Oppo
Oppo BDP-103EU Manuale utente
Oppo
Oppo BDP-103D Manuale utente
Oppo
Oppo BDP-103 Manuale utente
Oppo
Oppo BDT-101CI Manuale utente
