opticis PR5V-16 Manuale utente
-1 -
19’ 1U Power Rack Frame, PR5V-16
User’s Manual
-2 -
Index
1. Product Description..........................................................................................................................3
1.1 Main Features
2. Shipping Group...................................................................................................................................4
3. System Requirement.........................................................................................................................4
4. Exterior Description...........................................................................................................................5
5. Installation.............................................................................................................................................6
5.1 Hardware Installation
5.2 Reset and Factory Reset
5.3 PC Program Installation
6. Start Using MPDS-100.....................................................................................................................7
6.1 Local GUI
6.2 Remote Control
7. Product Specification.....................................................................................................................16
8. Warranty..............................................................................................................................................17
-3 -
1. Product Description
MPDS-100, Full HD(1080p) Media Player, is an intergraged playing device that plays video/audio
files, different types of documents as well as real time streaming of IP camera(encoder) based on
TCP/IP network. With control program, this device can play contents to designated place by
preset schedule and display caption on the screen. MPDS-100 can be used for adverstisement
using video, can be used for security or broadcasting using IP camera, as well as can be optimal
solution for remote lecture using video with PDF, MS office documents.
Figure 1. Connection
1.1 Main Features
H.264 Codec Media Player supports Full HD(1080p) resolution based on TCP/IP.
Provides HDMI output, Analog audio output, RS-232 port for external device control.
Supports various sources such as Documents (PDF, MS Office and etc), Video files,
YouTube, IP Camera(encoder), Picture, Audio files.
Remote Control Program
- Up to 100 groups x 99 presets = 9,900 display configuration and preset file save/load
- Immediate play by group, scheduling (weekly/sequence)
Self-GUI
- Enables to use web browsing, file explorer, video player features.
-4 -
2. Shipping Specification
□MPDS-100 □Power Adapter □HDMI Cable 1.2m
2.1 General items
-MPDS-100
-AC / DC power adaptor: One (1) unit of 5V / 2.5A.
-One (1) HDMI male to male cable (1.2m).
2.2 Optional items
3. System Requirement
3.1 Hardware Requirement
-Device doesn’t support wireless feature, however, wireless feature can be used with
using Wifi/Bluetooth dongle.
-No special requirement for memory size, CPU speed or chipset.
3.2 Software Requirement
-No special requirement.
3.3 Control PC Requirement
-OS version check for MPDS-100 control PC application.
-Requirement: Windows 7 or higher.
3.4 AC / DC Power Adapter
-MPDS-100 is designed to use +5V AC/DC external power adapter
-5 -
4. External Description
4.1 Input/Output port
Front Back
그림. 2 정면 그림. 4 후면
Side
Figure 2. MPDS-100 Input/Output port
LED : Power LED (RED) / Link LED (GREEN).
Reset : Reset button. (Factory reset when pushing 5 seconds.)
RS-232 : Optional.
RJ-45 (LAN): Connection with RJ-45 Network Cable
USB : USB2.0 4 Port
Power : 5V DC power input to the device
HDMI Output : HDMI video/audio output
LINE OUT : Analog audio output
4.2 LED Indication
MPDS-100 indicates its power and network condition with 2 LED light on the front.
- Power status LED (RED).
‘Flashing’Booting, initializing status.
‘On’Completion of booting, working status.
- Link LED (Green).
‘On’Connection with network link.
‘Off’Disconnection with network link.
- 6 -
5. Installation
5.1 Hardware Installation Procedure
Important: Please follow below procedure. If not installed properly, it could suffer
malfunction.
Step 1
Unpack the package.
Step 2
Turn on network storage (or PC), Display, Network Switch(L2/L3)
Step 3
Turn on the PC that has installed MPDS-100 PC application and connect LAN cable
(CAT5e/CAT6) to network switch.
Step 4
Connect MPDS-100 to network switch with using LAN cable (RJ-45)
Step 5
Connect MPDS-100 to monitor (HDMI OUT). If using external speaker, connect MPDS-100
to speaker (LINE OUT)
Step 6
If needed, connect Keyboard/Mouse for local UI control.
Step 7
Connect 5V power adapter.
5.2 Reset and Factory Reset
♦Reset : Device will reboot when reset button is pressed shortly
♦Factory Reset: Press and hold reset button for approximately 5 seconds, then LED of
device will turned OFF for factory reset after LED blinking.
- 7 -
6. Start Using MPDS-100
With using local GUI and control PC program, MPDS-100 can be utilized for best performance.
6.1 Local GUI
(1) Entering local GUI
Enter local GUI by clicking hot key (Ctrl + Shift + Alt + Back Space or right Ctrl +
Enter) with connected keyboard.
(2) From local GUI, can be Web browsing or can be displaying text, document, picture or
playing video from Network Attached Storage(NAS) or connected USB flash drive.
(3) Exit and switch to remote control mode.
Click ESC key of connected keyboard to exit local GUI and switch to remote control.
- 8 -
6.2 Remote Control
(1) Launch MPDS-Controller program.
(2) Register password for administrator (ID : admin) when first-time log-in.
(3) Log-in with Admin ID and set password.
(4) Setup > User Management: Add/Change/Remove user information.
- 9 -
(5) Setup > Device Setup: Set MPDS Network environment, Video Output Resolution,
Reboot, Display Power or firmware upgrade.
(6) Setup > Environment Setup: Select Language, Network Interface, Shared Network
Directory, Device Sorting Order. Sources (documents or video, picture, audio files)
except for IP camera (encoder) will be played from shared network directory. Browse
Network Attached Storage (NAS) or shared folder of PC on shared folder and type
user account, password of NAS or PC then click Apply. If there is no user account
use it as guest. Check user account information and password of PC that has shared
network directory.
- 10 -
(7) Layout Template: Set display placement and assign source to the desired place.
(Entire Screen Configuration)
A. Device list
Search MPDS device list and group those sources. Device setup and reboot can
be made by right click of mouse.
B. Source list
Select source type from left icons; document, video, YouTube, IP camera
(encoder), picture, text, caption. File or folder can be added with Source Add
button. All sources can be deleted by right click of mouse.
C. View Screen
Assign preview screen for desired source to the play list from source list with
drag and drop of mouse. In case of divided display, divided area can be
adjusted by mouse move. It can be deleted by right click of mouse.
D. Play List
Displaying play list that is selected from view screen. Set playing time from top
to bottom and change sequence of play list. Change to play previous or next
A
k
B
k
D
k
C
k
E
k
F
k
G
k
H
k
Indice
Altri manuali opticis Alimentazione elettrica
