Optiled 2043287012 Manuale utente
2043287012 2800K
2043407012 4000K
Art-Nr.:
09-3112.072
20-2013
Round 200-1800 Downlight
PM-011/09/12
INSTRUCTION MANUAL
Voltage 220V~240V AC 50/60 Hz
Rated Current
Color
Dimmable Compliance with Clipsal E32 Triac Dimmer
Warm White
Wattage
Round 200-1800 Downlight
135mA
28W
Natural White Daylight
Installation Method
1
THIS PRODUCT IS NOT SUITABLE FOR COVERING WITH THERMAL INSULATED MATERIAL.
WARNING : 1. This product is not designed for on-site maintenance and may not be disassembled.
2. Always turn off power prior to installation or replacement.
Limited Warranty 3 years.Please refer to Optiled L im ited Warranty Statement.
Warranty : Please contact local Optiled office or distributors for more information.
*Technical data are based on optimum conditions and actual performance may vary.
Country of origin : China
© 2012 OPTILED, all rights reserved.
The logo is a registered trademark.
ACCESS ABOVE CEILING REQUIRED.
ALWAYS CONNECT GROUND LEAD TO FIXTURE WHERE APPLICABLE.
INSTALL THIS LUMINAIRE THAT HAS THE CONSTRUCTION FEATURE DIMENSION SHOWN IN DRAWINGS.
RISK OF FIRE OR ELECTRIC SHOCK - USE IN DRY LOCATION ONLY.
RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE WHERE DIRECTLY EXPOSED TO WATER.
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR
OTHER SHARP OBJECTS.
DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS
DURING KIT INSTALLATION.
1
Open a round hole with 205mm diameter on
the mounting surface (thickness of material
between 5~16mm).
2
Open the wiring compartment cover with a screw driver. Put the main wire through the hole on the
waterproof cable gland (not provided, UL/ CUL listed watertight type cover IFFX/7 is recommended.
Grounding is required if metal cover was used.)
Email: [email protected]
Website‛ www.optiled.com
5-16mm
Ceiling
Ø205mm
Warning: # 18AWG solid or stranded copper conductor should be used.
Should only handled by qualified electrician.
**Compliance with Clipsal E32 Triac Dimmer
IP20
IP44
***
*IP20 Recessed part
IP44 Accessible part
09-3112.072
20-2013
Importiert durch:
RZB Rudolf Zimmermann,
Bamberg GmbH
Rheinstraße 16
D-96052 Bamberg
Deutschland
Hersteller:
OPTILED LIGHTING
INTERNATIONAL LTD.
UNIT E, 20/F., CNT TOWER,
338 HENNESSY ROAD,
WANCHAI, HONG KONG
Installation Method (Continued)
3
Connect Live, Earth, Neutral according to
the label on the terminal.
4
Close the Lid with screws.
5
Push the spring upwards, guide the
downlight through the opening of the ceiling.
6
Release spring, to ensure it is secured in
place.
Warning: Dropping of a fixture may cause serious
injury. Installation should be done by qualified
installerį
Neutral
Live
Earth
22
11
Changeable Rim
1
Snap the changeable rim onto the downlight.
2
Downlight rim holds in place by the metal
spring on the downlight.
1
1
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Optiled Attrezzatura di illuminazione
