Optim O2800 Manuale utente

STEAM

MOP

Simple and easy to use

for cleaning hard ﬂoors &

carpeted surfaces.

Features:

1. Handle

2. Cable Hook

3. Cord Storage Hook

4. Hight Adjustment Button

5. Rod

6. Power Cord

7. Water Tank

8. Mop Head

Please contact Godfreys Customer Care 1800 815 270, to ﬁnd your local

spare parts provider.

O2800 Steam Mop

Congratulations on the purchase of your new Optim Steam Mop. There

are many useful features built into your steam mop. We recommend that

you carefully read this instruction manual for the best results.

Speciﬁcations:

Wattage: 1600W

Water Tank Capacity: 250ml

Cord Length: 4.8m

Accessory:

9. Carpet Glider

10. Reﬁll Cup

11. Mop Pads (2pcs)

PLEASE READ THIS MANUAL BEFORE OPERATING CLEANER

This will ensure you obtain full beneﬁt from your new steam mop. Keep this

Instruction Manual in a handy place for future reference.

IMPORTANT

Always ensure that the cleaner is in the ﬁxed upright position and that the power

plug is removed from the power supply before cleaning your appliance, when

not in use, or attempting any maintenance task. This cleaner should only be used

for its intended purpose as described in these instructions.

PRECAUTIONARY MEASURES:

1. Do not operate the steam mop too close to heaters, radiators or

other hot surfaces.

2. Before inserting the power plug into the power supply, make sure

your hands are dry.

3. When unplugging the power plug from the power supply, do not

use the power cable, gently pull the power plug from the power

supply.

BEFORE YOU CLEAN, TEST FIRST

Your steam mop is designed to clean hard ﬂooring such as

ceramic tiles, vinyl, laminate, marble, stone and sealed hard wood

ﬂoors. Use of your steam mop on waxed or some unwaxed ﬂoors

may result in a diminished gloss.

The steam mop is not for use on unsealed wood ﬂoors. For the

best results test in an inconspicuous area and check the care

instructions from your ﬂooring manufacturer.

Before You Begin

1. This appliance is not intended for

use by persons (including children)

with reduced physical, sensory

or mental capabilities or lack of

experience and knowledge, unless

they have been given supervision

or instruction concerning use

of the appliance by a person

responsible for their safety.

2. Always check the power cord

before use. The power cord and

the power plug should be in a

good condition and must not be

damaged. If the power cord is

damaged or defective, it must be

replaced by the manufacturer, its

service agent or similarly qualiﬁed

persons in order to avoid a hazard.

3. Do not leave the appliance

unattended when plugged into

the power supply. Unplug the

power plug from the power

supply when not in use and before

conducting maintenance, cleaning

or troubleshooting.

4. To prevent electric shock, do not

use the appliance outdoors. The

steam cleaner is intended for

household use only.

5. Children must be supervised to

ensure that they do not play with

the appliance.

6. Do not operate the appliance in a

stationary position for an extended

period of time. Keep the appliance

moving while in operation.

7. Use only the manufacturer’s

recommended attachments.

8. Do not pull or carry the appliance

by the power cord, do not use the

power cord as a handle, do not

close a door on the power cord or

pull the power cord around sharp

edges or corners.

9. Keep the power cord away from

heated surfaces.

10. Do not run the steam cleaner over

the power cord.

11. Do not unplug by pulling on the

power cord. To unplug, grasp the

power plug not the power cord

and gently pull the power plug

from the power socket.

12. Do not use an extension cord.

13. Do not handle the power plug or

appliance with wet hands.

14. Do not use steam cleaner if it has

been dropped, damaged, left

outdoors or immersed into water.

Return it to the nearest service

centre.

15. Ensure that the cleaner is ﬁxed

in the upright position before

unplugging the power plug from

the power supply. Remove the

power plug from the power supply

and handle the cleaner with care

when ﬁlling the water tank with

water.

16. Do not over ﬁll the water tank.

17. Do not use the cleaner without

the water tank cap in place.

Check that the water tank cap is

completely closed before use.

18. Do not operate the cleaner

without water in the water tank.

WARNING! To reduce the risk of ﬁre, electric shock or injury when using

an electrical appliance, basic precautions should always be followed,

including the following:

Before You Begin

19. Do not ﬁll the water tank with

anything other than water. Never

put additives (such as perfume

disinfectant, eucalyptus oil, stain

remover or products containing

alcohol) in the water tank as damage

to the cleaner may result or make the

cleaner dangerous to use.

20. Empty the water tank after each use.

21. Do not touch any hot areas on the

steam cleaner. It is normal for the

steam cleaner to heat up during

operation.

22. The force and heat of the steam

may have an adverse effect on some

materials. Always test the cleaner on a

small concealed area to determine if it

is suitable for treatment.

23. Accessories become hot during use.

Allow them to cool down before

handling them.

24. Use only the manufacturer’s

recommended attachments. Use of

attachments that are not provided or

sold by the manufacturer may cause

ﬁre, electric shock or injury.

25. Never point or aim the steam cleaner

at people, animals or plants.

26. Do not aim the steam cleaner at

electrical systems or wires.

27. Connecting the steam cleaner to

improper voltage may result in

damage to the steam cleaner and

possible injury.

28. Do not use steam cleaner if there

are visible signs of damage or if it is

leaking.

29. Do not use the cleaner on leather, wax

polished furniture or ﬂoors, synthetic

fabrics, velvet or other delicate, steam

sensitive materials.

30. Never put descaling, aromatic,

alcoholic or detergent products into

the water tank, as this may damage

the cleaner or make it unsafe for use.

WARNING: Danger of scalding. Please use the steam mop with

caution. The steam emitted from the steam mop is very hot.

CAUTION: Recently cleaned surfaces may be hot, please avoid

contact.

Assembling

1. Insert the handle into the main body

until it locks into position.

2. Insert the main body into the mop head

ensuring that it clicks into place.

3. Secure the mop head to the main body

with the screw provided, as shown.

4. Attach the mop pad onto the base of

the mop head.

IMPORTANT! The appliance should be disconnected from the power

supply before you start to assemble.

Before You Begin

Instruction for Use

Before You Begin Cleaning

1. Unscrew the water tank cap and ﬁll the water

tank with cool tap water by using the reﬁll cup

provided.

2. Ensure that the cleaner is standing vertically

and in the ﬁxed position. With your foot placed

onto the mop head push the handle forward to

place the cleaner into the ﬁxed position.

3. Adjust the height of the rod by pressing the

Height Adjustment Button. Ensure the power

cable is secured into the cable hook.

IMPORTANT: Do not operate the cleaner over the

power cable.

4. Plug the power plug into the power supply. The

LED light on the main body will illuminate when

the cleaner is ready for cleaning.

Note: Upon initial use, please allow the water to

ﬂow through the system for approximately 30

seconds to prime the unit.

Attention: DO NOT reﬁll the tank when the mop is connected to mains power

supply. Only reﬁll the water tank with cold tap water.

Instruction for Use

Steam Cleaning Hard Floors

NOTE: Before using the steam mop, sweep or vacuum the ﬂoor to

remove any loose dirt or debris.

IMPORTANT: Do not use the cleaner without a mop pad attached to the

mop head.

WARNING: Hard ﬂoor wax may be removed by the heat and steam

action. Do not use the cleaner on unsealed wood ﬂoors or operate the

cleaner in a stationary position for an extended period of time.

1. With your foot placed onto the mop

head, pull the handle backwards to

unlock the cleaner. The cleaner will

emit steam in the unlocked position.

When steam is emitting from the

cleaner slowly pass over the surface to

be cleaned.

2. With your foot placed onto the mop

head push the handle forward to place

the cleaner in the ﬁxed position. The

cleaner will stop emitting steam in the

ﬁxed position.

release steam

stop steam

10.

Steam Cleaning Carpets

NOTE: Before using the steam mop, vacuum the ﬂoor to remove any loose dirt or

debris.

IMPORTANT: Do not use the cleaner without a mop pad and carpet glider

attached to the mop head.

1. Place the cleaner onto the carpet glider.

2. Plug the cleaner into the power supply.

3. With your foot placed onto the ﬂoor head, pull

the handle backwards to unlock the cleaner.

The cleaner will emit steam in the unlocked

position.

5. With your foot placed onto the ﬂoor head push

the handle forward to lock the cleaner. The

cleaner will stop emitting steam in the locked

position.

4. Move the cleaner slowly backwards and

forwards paying particular attention to high

trafﬁc areas.

stop steam

Indice

Altri manuali Optim Pulitore a vapore

Optim

Optim O2600 Manuale utente

Manuali Pulitore a vapore popolari di altre marche

Oreck

Oreck STEAM-IT STEAM100LRH Manuale utente

Beautural

Beautural YPZ-146 Manuale utente

MPM

MPM MZP-02 Manuale utente

Electrolux

Electrolux Refine 500 Manuale utente

Kärcher

Kärcher SC 3 Premium Manuale utente

Shark

Shark PRO Steam & Spray Istruzioni operative e di manutenzione

Jula

Jula 802-337 Manuale utente

Haan

Haan Floor Sanitizer MS-30 Manuale utente

Black & Decker

Black & Decker HSM13E1 Manuale utente

HOFFEN

HOFFEN GS-1231 Manuale utente

POLTI

POLTI VAPORETTO SYSTEME PRO Manuale utente

eta

eta AQUASIM PRO Manuale utente

Maxwell

Maxwell MW-3715 G Manuale utente

VAPamore

VAPamore Primo MR-100 Manuale

Bestron

Bestron AZQ016 Manuale utente

Nilfisk-ALTO

Nilfisk-ALTO Steamtec 312 Manuale utente

Tempo di saldi

Tempo di saldi SPINSCRUBBER Manuale utente

DOMENA

DOMENA HYGIAFLOR Manuale utente