Optimum Time Ultimate Event Manuale utente
The Endurance Watch has four basic modes.
1. Time of day (hours, minutes and seconds) with date month and year
2. Stop watch with hours minutes and seconds plus time of day (hrs,
mins, secs)
3. Alarm 1 (with time of day display showing) plus optional single hour
stroke
4. Alarm 2 (with time of day display showing)
The display has two rows of digits, the lower row being much larger
than the upper row. In stop watch mode it is possible to have the
display with large stop watch and smaller time displays or large time
and smaller stop watch. It is possible to alternate between these sizes
even when the stop watch is running. The stop watch has the letters
SW before the digits and the time of day has an icon of a clock before it
so that it is clear which row is time and which is stop watch. There is a
minute alarm when the stop watch is running which sounds 3 beeps
every full minute, but if not required this alarm can be easily silenced.
1
WatchEndurance
ADJUST
MODE
EL
SET
START
STOP
START
STOP
ADJUST
SET
MODE
EL
ALARM1
AM PM
24HR
ALARM 2 MIN
SW
SW
2
TO SET THE TIME AND CALENDAR ON THE WATCH
1 Press the MODE button to access the time and calendar display. (The letters SW will not be visible
because you are not in stop watch mode, nor will either of the words Alarm 1 or Alarm 2 show
because you are not in the alarm modes).
2 Press the SET button and hold it down for 2 seconds. You will hear a 'beep' and either AM, PM or
24HR will be flashing.
3 Press ADJUST to choose between 12 or 24 hour clock.
4 Press MODE to confirm your choice and make the hours flash.
5 Press ADJUST to alter the hour making sure if you are in 24 hour mode that you are not 12 hours
wrong!
6 Press MODE to confirm and start the minutes flashing.
7 Press ADJUST to alter the minutes.
8 Press MODE to confirm and start the seconds flashing.
9 Press ADJUST to set the seconds to zero.
10 Press MODE to confirm and start the year flashing.
11 Press ADJUST to alter the year.
12 Press MODE to confirm and start the month flashing.
3
13 Press ADJUST to confirm and start the date flashing.
14 Press START/STOP to adjust between European date order (date, month, year), or American date
order (month, date, year).
15 Press either SET to confirm all your choices and exit the time setting mode or press MODE to go
back to stage 2 above and repeat the process.
16 If you have pressed SET to confirm the clock and calendar are now set.
NOTES
1 You can confirm your changes at any time using the SET button without having to go through the
whole sequence.
2 You can move a digit on by giving a single press or you can fast scroll through by holding the button
down.
TO USE THE STOP WATCH
1 Press MODE to enter the stop watch function.
2 Choose between large stop watch/small time or small stop watch/large time using either SET button.
(The stop watch has the letters SW before the display and the time has a clock icon before it).
3 Press START/STOP to either start or stop the stop watch. This counts up only, and counts in hours,
minutes, and seconds.
45
4 To clear the stop watch make sure it is stopped and then press ADJUST.
5 Whether the stop watch is running or not you can choose whether you want the stop watch or the
clock on the large digits by pressing SET.
6 The minute alarm will sound at every minute during count up if the icon in the top right of the display
is on.
7 To activate the minute alarm, stop the stop watch and zero it.
8 Press ADJUST and hold it down for 2 seconds until you hear a 'beep' which will either have turned
the minute alarm on or off depending on its previous state.
TO SET THE ALARM 1 AND THE HOUR STRIKE
1 Press the MODE button to access the ALARM 1 display. (The letters SW will not be visible
because you are not in stop watch mode, but Alarm 1 will show because you are in the alarm 1
mode).
2 Press the SET button and hold it down for 2 seconds. You will hear a 'beep' and the hours will be
flashing.
3 Press ADJUST to alter the hour making sure if you are in 24 hour mode that you are not 12 hours
wrong!
4 Press MODE to confirm and start the minutes flashing.
5 Press ADJUST to alter the minutes.
67
6 Press SET to confirm the ALARM 1 setting
7 The alarm is switched on and off using the START/STOP button. The Alarm 1 on icon appears just
after the words ALARM 1
8 The use of the START/STOP button also controls the single hour strike beep which is optional, and
controlled in the ALARM 1 mode only
9 The start/stop button controls the alarm 1 and hour strike in the following order each time you press
it: Alarm 1 on only, Alarm 1 and hour strike both on, Alarm 1 off but hour strike on, and Alarm 1 and
hour strike both off.
TO SET THE ALARM 2
1 Press the MODE button to access the ALARM 2 display. (The letters SW will not be visible because
you are not in stop watch mode, but Alarm 2 will show because you are in the alarm 2 mode).
2 Press the SET button and hold it down for 2 seconds. You will hear a 'beep' and the hours will be
flashing.
3 Press ADJUST to alter the hour making sure if you are in 24 hour mode that you are not 12 hours
wrong!
4 Press MODE to confirm and start the minutes flashing. Press ADJUST to alter the minutes.
5 Press SET to confirm the ALARM 1 setting
6 The alarm is switched on and off using the START/STOP button
TO CHANGE THE BATTERY
1 Remove the timer from the outer black clip.
2 Carefully unscrew the six screws that hold the back on.
3 Remove the case back noting the arrow pointing
up and the words TOP and BOTTOM to
show which way up the back fits.
4 Remove the old battery taking note of
how it fitted.
5 Fit a new battery carefully in place of the old one. (The battery is a Lithium battery type CR2032).
Make sure you get the positive (+ve) facing upwards.
6 Carefully replace the case back making sure the rubber seal has not come
away from its slot in the case front. Make sure you have the case back the right way up.
7 Carefully replace the six screws making sure you do not over tighten them and strip the threads.
8 Replace the timer unit into the black clip making sure you press it well home so that you hear a
loud 'click' so that it cannot fall out.
8
ADJUSTING THE ELASTIC STRAP
There is a right way and a wrong way to adjust the elastic strap. Please take note to avoid
any chance of the strap coming undone.
1. Place the watch on the wrist and pass the elastic through the clasp from the bottom
to the top.
2. Pull the elastic to the required tightness and secure by pressing the clasp firmly closed.
3. Push the elastic loop over the spare length of elastic to keep the loose end tidy.
Also available in the Optimum Time Range:
Ultimate Event Watch - The Classic
Ultimate Sailing Watch - The Classic
The Timesaver - Event Timing Equipment
3 Day Event Watch - The Classic & The Compact
Ultimate Endurance Watch - The Classic & The Compact
Ultimate Football Timer - The Classic & The Compact
Ultimate Rugby Timer - The Classic & The Compact
Ultimate Hockey Timer - The Classic & The Compact
Heart Rate Monitor’s
Optimum Time Ltd.
P.O. Box 39
Market Deeping
Peterborough
PE6 8XQ
England
Tel 01733 333324 Fax 01733 333700
International Tel +44 1733 333324 Fax +44 1733 333700
www.optimumtime.co.uk
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Optimum Time Orologio
Optimum Time
Optimum Time OS 7 Series Manuale utente
Optimum Time
Optimum Time OS 3 Series Manuale utente
Optimum Time
Optimum Time OS 5 Series Manuale utente
Optimum Time
Optimum Time OS 4 Series Manuale utente
Optimum Time
Optimum Time OS 3 Series Manuale utente
Optimum Time
Optimum Time ULTIMATE COMPACT ENDURANCE Manuale utente
