Orbit 57865 Manuale utente

Battery Operated

SPRINKLER

TIMER

MODEL 57865

PN 57865-24 rA

No external power

source needed

Ideal for remote locations

and drip irrigation

Full waterproof construction

Easy-Set Logic™ Programming

Help: Before returning this sprinkler timer to the store, contact Orbit®Technical

Service at: 1-800-488-6156.

Listings: The sprinkler timer complies with UL-1951. Appropriate international

models are CE®approved.

Notice: The information in this manual is primarily intended for the user who will

establish a watering schedule and enter that schedule into the sprinkler timer. This

product is intended to be used as an automatic sprinkler timer to be used near the

valves, typically underground in a valve box, as described in this manual.

Orbit®Irrigation Products, Inc.

North Salt Lake, UT 84054

www.orbitonline.com

1-800-488-6156

TABLE OF CONTENTS

Buttons, Dial and Display ................................................................................................2

Install Batteries ...............................................................................................................4

Programming your Timer................................................................................................5

Additional Features..........................................................................................................6

Connecting the Timer ......................................................................................................8

Glossary of Terms............................................................................................................9

Troubleshooting .............................................................................................................10

BUTTONS, DIAL AND DISPLAY

Buttons

A Toggle between Programs A and B

B Clear settings or cancel events

C Decrease value

D Increase value, select HOW OFTEN

setting or access RAIN DELAY mode

E Move cursor or toggle AM/PM

F Access MANUAL WATERING mode

G Reset all timer settings

B C D E

Dial

OFF

All timer functions are OFF

AUTO

Timer is set for automatic operation and

will only water in this dial position

SET TIME

Set the time of day

SET DATE

Set the year, month and day

START TIMES

Set start times for Programs A and B

HOW OFTEN

Set the days or interval you want to water

HOW LONG

Set station run times (0 to 240 minutes)

WATER BUDGET

Seasonal Adjustment - change station

run times all at once – 10% to 200%

Display

1 Shows current station while

programming or watering

2 Shows current start time while

programming

3 Displays active program(s) while

programming or watering

4 Y=Year, M=Month, D=Day for setting date

5 Indicates low batteries (replace

batteries if showing)

6 Indicates day of week and

watering days selection

7 Indicates that more options are

available for that dial position by

pressing the button

INSTALL BATTERIES

Step 1

Remove cap

Step 2

Separate program pod from base

Step 3

Insert 3 AA batteries as indicated in the

battery compartment

Step 4

Return program pod to base

Note: During battery changes,

programming will be preserved

for 30 seconds.

Step 1

Step 3

Step 2

Step 4

PROGRAMMING YOUR TIMER

Step 1

Press reset button.

Step 2–Set Time

Turn the dial to SET TIME.

Press or to set the current time.

To quickly switch between

AM or PM press .

Step 3–Set Date

Turn the dial to SET DATE.

Press or to set the current year

then press .

Press or to set the current month

then press .

Press or to set the current day.

Step 4–Start Times

Turn the dial to START TIMES.

Press to select the desired program.

NOTE: Use program B only if you want

to schedule watering independent of

Program A.

Press or to set the desired start

time.

If more cycles are desired then press

and set another start time (up to 4).

To delete a start time press .

NOTE: If start times overlap then the

second start time will water after the first

is finished.

Step 5–How Often

Turn the dial to HOW OFTEN.

Press to select the desired program.

Press to select the desired days to

water: select either days of the week,

interval (every 1 to 32 days), or odd/even

days.

Press to highlight your option(s).

If INT is chosen press or to change

interval.

Press or to deselect an option.

Step 6–How Long

Turn the dial to HOW LONG.

Press to select the desired program.

Press to select the desired station.

Press or to set the run time (0 to

240).

Repeat for other stations if needed.

Step 7–Auto

Turn the dial to AUTO.

The set program(s) will run automatically.

Manual Watering

To manually run a program:

Press while dial is in the AUTO

position. The timer will run all set

programs.

To select only the A or B program, or

individual stations:

Press to select only A or B program.

Press again to set individual watering

times for stations.

NOTE: Manual watering of a set program

(A or B) will only work after programming

has been set up.

Press to cancel watering.

PROGRAMMING YOUR TIMER

Off

Turn dial to OFF.

No watering may occur while in the OFF

position.

Water Budget

Turn dial to WATER BUDGET.

NOTE: This feature allows for seasonal

adjustments.

Set the value to 100% to water exactly as

programmed.

For a 10 minute run time, 50% will reduce

it to be 5 minutes and 200% will increase it

to 20 minutes.

Press to select the desired program.

Press or to set the budget value

(10% - 200%).

Press to reset the value to 100%.

NOTE: The % symbol will show on the

screen when the value for A or B is

anything other than 100%.

Rain Delay

NOTE: Rain Delay will cancel all scheduled

watering for a 24hr, 48hr, or 72hr period.

Press while dial is in the AUTO

position.

Press until the desired delay is

displayed.

Do not press any buttons for 3 seconds to

start the delay.

Press to stop Rain Delay and return to

scheduled watering.

ADDITIONAL FEATURES

Connect the timer to the valve after you

have programmed it. This timer will only

operate with DC solenoids that have been

included in the package. Replace any

original solenoids on valves connected to

the timer with these DC solenoids.

Note: Included solenoid adapters may be

necessary depending on the specific valve.

1. Make sure the main timer unit is fully

inserted into the docking bay.

2. Twist on the protective timer cover tight

enough to ensure a waterproof, dirt-

proof seal. Do not over-tighten.

Connecting Timer to Valve

1. Attach timer clip to valve solenoid.

2. Remove plug from the receptacle

marked “1” on the bottom of the timer.

3. Insert wire connector into the receptacle

marked “1” on the bottom of the timer.

Ensure that the connector fully seats

into the receptacle.

4. Attach timer to timer clip.

5. Rotate dial to OFF. Wait 60 seconds to

allow the timer to close all valves.

6. Rotate dial to AUTO and replace cap.

CONNECTING THE TIMER

Step 1

Step 3

Step 5

Step 2

Step 4

Step 6

Indice

Altri manuali Orbit Timer

Manuali Timer popolari di altre marche

Intermatic

Intermatic P1131 Manuale utente

Learning Resources

Learning Resources Time Tracker mini Manuale utente

CEBEK

CEBEK I-215 Manuale utente

Somogyi

Somogyi home TS MD 5 Manuale utente

Profile

Profile 010200280 Manuale utente

Gizmo

Gizmo T4 Manuale utente

Tekmar

Tekmar Timer 031 Manuale utente

Daikin

Daikin DST301B61 Manuale utente

sisel

sisel ENDA ETM2432 Manuale utente

B&Q

B&Q TE103 Manuale operativo e di manutenzione

Hozelock

Hozelock AC Plus 2700 Manuale utente

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manuale utente

Tork

Tork TU40 Manuale utente

Emos

Emos EMT400F Manuale utente

FarmTek

FarmTek Polaris Manuale utente

Maximum

Maximum CRONUS Manuale utente

Uberhaus

Uberhaus TD133B Manuale utente

Clas Ohlson

Clas Ohlson 31-3766 Manuale utente