Oregon Scientific DP200 Manuale utente

Radio Controlled Daylight

Projection Clock with

Outdoor Temperature

Model:DP200/DP200A

User Manual

RGR126_COVER.indd 1 5/11/06 2:29:53 PM

Radio Controlled Daylight Projection

Clock with Outdoor Temperature

Model: DP200 / DP200A

USER MANUAL

CONTENTS

Overview....................................................................2

Front View ..................................................................2

Back View ...................................................................2

Remote Sensor............................................................3

Getting Started..........................................................3

Power Supply..............................................................3

Remote Sensor..........................................................3

Sensor Data Transmission..........................................4

Clock .........................................................................4

Clock Reception..........................................................4

Manually Set Clock.....................................................4

LCD Display...............................................................5

Alarm..........................................................................5

Projection..................................................................5

Temperature..............................................................6

Reset..........................................................................6

Precautions...............................................................6

Speciﬁcations............................................................7

About Oregon Scientiﬁc...........................................7

EU-Declaration of Conformity..................................7

FCC Statement .........................................................7

Declaration of Conformity............................................8

DP200 IM EN R4.indd 1 2007.6.29 2:52:11 PM

OVERVIEW

FRONT VIEW

1. IR motion sensors (at the top): Snooze; change

display mode

2. ALARM ON / OFF (at the top): Enable / disable

alarm

3. Time zone

4. Clock signal reception indicator

5. Clock, alarm and temperature display

6. °C / °F temperature unit display

7. Alarm icon

8. Outdoor temperature icon

9. Battery low indicator

10. Indoor temperature icon

11. Projector: Project time,alarm status and indoor /

outdoor temperature

BACK VIEW

DP200 IM EN R4.indd 2 2007.6.29 2:52:14 PM

1. FOCUS: Focus the projected image

2. Adaptor socket

3. Battery compartment

4. EU / UK: Select clock reception

5. PROJECTION AUTO / CLOCK / OFF: Select the

projection mode

6. 180° ROTATION: Rotate projection image by 180°

degrees

7. SET ALARM: Set alarm

8. SET CLOCK: Enter clock setting mode

9. °C / °F: Select temperature unit

10. / : Increase / decrease settings; activate /

deactivate clock reception signal

11. RESET: Reset unit to default settings

REMOTE SENSOR

1. LED status indicator

2. Wall mount hole

3. Battery compartment

4. RESET hole

5. CHANNEL switch

GETTING STARTED

POWER SUPPLY

Batteries serve as back up. For continuous use of

projector and backlight, always plug in the adapter

socket. Make sure the socket outlet is easily accessible

to the unit.

To insert batteries:

1. Remove the battery compartment and insert the

batteries, matching the polarities.

2. Press RESET after each battery change.

indicates main unit batteries are low.

REMOTE SENSOR

To set up the sensor:

1. Open the battery compartment.

2. Select a channel then press RESET.

3. Close the battery door.

4. Place the sensor within 30 m (98 ft) of the main unit

using the table stand or wall mount .

TIP The transmission range may vary depending on

many factors. You may need to experiment with various

locations to get the best results.

DP200 IM EN R4.indd 3 2007.6.29 2:52:15 PM

SENSOR DATA TRANSMISSION

The main unit will automatically search for the outdoor

sensor. The sensor reception icon in the remote sensor

area shows the status:

ICON DESCRIPTION

Main unit is searching

for sensor(s).

A channel has been

found.

Sensor 1 data

received.

and “--.-“

The sensor cannot

be found.

NOTE If the sensor is not found, check the batteries,

obstructions and remote sensor location.

For best results:

• Place the sensor out of direct sunlight and rain.

• Position the sensor facing the main unit, minimizing

obstructions.

• Place the sensor in a location away from metallic or

electronic objects.

• Position the sensor closer to the main unit during

cold winter months.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock

automatically with a clock signal.

DP200:

Slide EU / UK to select the signal received.

• EU: DCF-77 signal: within 1500 km (932 miles) of

Frankfurt, Germany.

• UK: MSF-60 signal: within 1500 km (932 miles) of

Anthorn, England.

DP200A:

• WWVB-60 signal: within 3200km (2000 miles) of

Fort Collins Colorado. Manually set clock to select

time zone (Paciﬁc, Mountain, Central or Eastern).

To enable / disable signal reception:

Press and hold to enable or to disable signal

reception.

NOTE Reception takes 2-10 minutes. If the signal is

weak, it can take up to 24 hours to get a valid signal.

Clock signal reception indicator:

STRONG

SIGNAL WEAK SIGNAL NO SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception

ﬁrst.

1. Press and hold SET CLOCK.

2. Press or to change the settings.

DP200 IM EN R4.indd 4 2007.6.29 2:52:17 PM

3. Press SET CLOCK to conﬁrm.

4. The settings order is: time zone offset, 12/24 hr

format, hour and minute.

DP200: Time zone offset sets the clock +/- 23 hours

from the received clock signal time.

DP200A: Select the time zone: (P) Paciﬁc, (E) Eastern,

LCD DISPLAY

Wave your hand at least 3 inches above the IR motion

sensors to toggle display modes between:

• Clock

• Alarm

• Outdoor temperature

• Indoor temperature

ALARM

To set the alarm:

1. Press and hold SET ALARM.

2. Press / to set hour / minute.

3. Press SET ALARM to conﬁrm. indicates alarm is

ON.

To toggle alarms ON / OFF:

1. Press SET ALARM to display alarm time.

2. Press ALARM ON / OFF to turn alarm ON / OFF.

To silence the alarm:

• Wave your hand above the IR motion sensors to

silence it for 8 minutes.

• Press ALARM ON / OFF to turn the alarm off and

activate it again after 24 hours.

PROJECTION

The ultra-bright LED enables daylight projection of time

and temperature information.

To activate projection:

Slide PROJECTION to AUTO or CLOCK.

• Slide to AUTO to toggle between current time and

indoor / outdoor temperature.

• Slide to CLOCK to project current time only.

To adjust the projection image:

• Press 180° ROTATION to rotate the image by

180°.

• Focus the projector image by turning the FOCUS

wheel.

NOTE The installed CDS light sensor inside the unit

will activate automatic projection / display dimming.

NOTE If projection is illuminated, do not look directly

into the projector. Oregon Scientiﬁc will not be held

responsible for any results or consequences arising

from the misuse of this product.

DP200 IM EN R4.indd 5 2007.6.29 2:52:17 PM

TEMPERATURE

To toggle temperature unit:

Press °C / °F.

NOTE Please keep the temperature sensor (adjacent

to the adaptor socket) away from the main unit or

electrical devices as heat from these devices will affect

accurate indoor temperature readings.

RESET

Press RESET to return to the default settings.

PRECAUTIONS

• Do not subject the unit to excessive force, shock,

dust, temperature or humidity.

• Do not cover the ventilation holes with any items

such as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not tamper with the unit’s internal components.

This invalidates the warranty.

• Only use fresh batteries. Do not mix new and old

batteries.

• Images shown in this manual may differ from the

actual display.

• When disposing of this product, ensure it is

collected separately for special treatment.

• Placement of this product on certain types of

wood may result in damage to its ﬁnish for which

Oregon Scientiﬁc will not be responsible. Consult

the furniture manufacturer's care instructions for

information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal

waste.Collection of such waste separately for

special treatment is necessary.

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before ﬁrst use.

NOTE The technical speciﬁcations for this product and

the contents of the user manual are subject to change

without notice.

DP200 IM EN R4.indd 6 2007.6.29 2:52:18 PM

SPECIFICATIONS

TYPE DESCRIPTION

MAIN UNIT

L x W x H 85 x 90 x 90 mm

(3.35 x 3.54 x 3.54 in)

Weight 510 g (17.99 oz)

without battery

Indoor temperature

range

0°C to 50°C

(32°F to 122°F)

Outdoor

temperature range

-30°C to 60°C

(-22°F to 140°F)

Resolution 0.1°C (0.2°F)

Signal frequency 433 MHz

Main power supply DC 5.0V power adapter

Back-up power

supply 1 x CR2032 3 V battery

REMOTE UNIT (THN132N)

L x W x H 92 x 60 x 20 mm

(3.6 x 2.4 x 0.8 in)

Weight 62 g (2.22 oz)

Transmission range 30 m (98 ft) unobstructed

Temperature range -30°C to 60°C

(-22°F to 140°F)

Power 1 x UM-4 (AA) 1.5 V

batteries

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientiﬁc.com) to learn

more about Oregon Scientiﬁc products. If you’re in

the US and would like to contact our Customer Care

departmentdirectly,pleasevisit:www2.oregonscientiﬁc.

com/service/support

Call 1-800-853-8883.

For international inquiries, please visit: www2.

oregonscientiﬁc.com/about/international

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientiﬁc, declares that this Radio

Controlled Daylight Projection Clock with Outdoor

Temperature (model: DP200 / DP200A) is in compliance

with the essential requirements and other relevant

provisions of Directive 1999/5/EC. A copy of the signed

and dated Declaration of Conformity is available on

request via our Oregon Scientiﬁc Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland CH

and Norway N

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

WARNING Changes or modiﬁcations not expressly

DP200 IM EN R4.indd 7 2007.6.29 2:52:18 PM

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician

for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact

for support or sales. Please call our customer service

number (listed on our website at www.oregonscientiﬁc.

com or on the warranty card for this product) for all

inquiries instead.

Name: Oregon Scientiﬁc, Inc.

Address: 19861 SW 95th Ave.,Tualatin,Oregon

97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: DP200 / DP200A

Product Name: Radio Controlled Daylight

Projection Clock with Outdoor

Temperature

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,Phase

1,41 Man Yue St.,Hung Hom,

Kowloon, Hong Kong

is in conformity with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: 1)

This device may not cause harmful interference. 2) This

device must accept any interference received, including

interference that may cause undesired operation.

DP200 IM EN R4.indd 8 2007.6.29 2:52:18 PM

Reloj Proyector en luz diurna

Radiocontrolado y con Temperatura

exterior

Modelo: DP200 / DP200A

MANUAL DE USUARIO

ÍNDICE

Resumen............................................................................2

Vista Frontal / Superior LCD...............................................2

Vista Trasera / Inferior ........................................................2

Sensor Remoto...................................................................3

Para Empezar....................................................................3

Suministro De Corriente......................................................3

Sensor Remoto.................................................................3

Transmisión De Datos Del Sensor......................................4

Reloj...................................................................................4

Recepción Del Reloj...........................................................4

Ajuste Manual Del Reloj ....................................................5

Pantalla LCD.....................................................................5

Alarma...............................................................................5

Proyección........................................................................5

Temperatura......................................................................6

Reinicio..............................................................................6

Precaución.........................................................................6

Ficha Técnica....................................................................7

Sobre Oregon Scientiﬁc...................................................7

EU - Declaración De Conformidad...................................7

DP200 IM ES R3.indd 1 2007.6.29 2:53:19 PM

Altri manuali per DP200

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Oregon Scientific Orologio

Oregon Scientific

Oregon Scientific JW108 Manuale utente

Oregon Scientific

Oregon Scientific RESONANCE CIR600 Manuale utente

Oregon Scientific

Oregon Scientific RA200 Manuale utente

Oregon Scientific

Oregon Scientific DP100 Manuale utente

Oregon Scientific

Oregon Scientific rm318p Manuale utente

Oregon Scientific

Oregon Scientific RA313P Manuale utente

Oregon Scientific

Oregon Scientific rm318p Manuale utente

Oregon Scientific

Oregon Scientific SKT338N Manuale utente

Oregon Scientific

Oregon Scientific RM116E Manuale utente

Oregon Scientific

Oregon Scientific RM912TH Manuale utente

Oregon Scientific

Oregon Scientific RM913TCN Manuale utente

Oregon Scientific

Oregon Scientific JM889NR Manuale utente

Oregon Scientific

Oregon Scientific BAR623PU Manuale utente

Oregon Scientific

Oregon Scientific PROJI Manuale utente

Oregon Scientific

Oregon Scientific RM318PU Manuale utente

Oregon Scientific

Oregon Scientific RMR391PU Manuale utente

Oregon Scientific

Oregon Scientific RM968 Manuale utente

Oregon Scientific

Oregon Scientific RRA320PN Manuale utente

Oregon Scientific

Oregon Scientific BAR339PA Manuale utente

Oregon Scientific

Oregon Scientific PROJI BAR369P Manuale utente

Oregon Scientific

Oregon Scientific RM368P Manuale utente

Oregon Scientific

Oregon Scientific RM962U Manuale utente

Oregon Scientific

Oregon Scientific RRM320P Manuale utente

Oregon Scientific

Oregon Scientific JMR838WFA Manuale utente

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

La Crosse Technology

La Crosse Technology WS-8256-AL Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

La Crosse Technology

La Crosse Technology WT-3141b Manuale

La Crosse Technology

La Crosse Technology W86531 Manuale utente

Sharp

Sharp SPC900 Manuale utente

La Crosse Technology

La Crosse Technology 404-50447 Manuale utente

Datexx

Datexx DF0063 Manuale utente

LG LEC-005 Manuale utente