Oregon Scientific RM962A Manuale utente
1
GB
RADIO CONTROLLED CLOCK
WITHINDOORTHERMOMETER
MODEL:RM962A
Instruction Manual
INTRODUCTION
Congratulations on your purchase of the Clock with Temperature
Display RM962A.
The RM962A is a multifunction radio controlled clock. It can
automatically synchronize its current time and date when brought
within an approximate 1500 km or 1000 miles radius of the radio
signal generated from the U.S. Atomic Clock.
Features of this unit include: indoor temperature display, current
date display, daily crescendo alarm with eight-minute snooze
function and EL backlight.
DESCRIPTION OF PARTS
A 3-lineLCD
Displays the time, date, alarm status and temperature
B [ ] Battery-Low icon
Lights up when batteries are running dry
C[ ] Radio-Reception Signal
Indicates the condition of radio reception
D[ ] Alarm-on icon
Appears when the alarm is activated
E[ ] Alarm icon
Appears when the alarm time is displayed
2
GB
F MODE button
Toggles the calendar clock display modes or activates the
calendar clock setting mode
G UP[ ]button
Increases the value of a setting
H ZONE button
Toggles among the 4 U.S. time-zones: Pacific, Mountain,
Central or Eastern
I ALARM button
Displays the alarm time or sets the alarm status
J[ ]button
Activates the snooze function when an alarm activates or
turn on the back light for five seconds
K Batterycompartment
Accommodates two UM-4 or “AAA” size 1.5V batteries
L RESET button
Resets the unit by returning all settings to their default
values
M Rotatable stand
BATTERY INSTALLATION
The unit uses two (2) UM-4 or “AAA” size 1.5V batteries.
To insert batteries:
1. Click open the battery door as shown.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Replace the battery compartment door.
Note: The battery life can be reduced vastly by frequent use
of the back light or snooze function.
If not disposed of properly batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
If the batteries are already inserted, pull out the plastic tab.
HOW TO USE THE BACKLIGHT
Press [ ] once. The back light will activate
for five seconds.
ABOUT RADIO RECEPTION
This unit is a radio frequency (RF) controlled clock. When located
within a 1500km or 1000 miles radius of radio signal from the U.S.
Atomic Clock. The benefit of a RF controlled clock is that highly-
accurate time is maintained and manual adjustments to the time
and date are not required.
3
GB
When the batteries are first installed, the unit will automatically
search for a radio signal.
When in search mode, the antenna icon [ ] will blink. This
process takes between two (2) and ten (10) minutes. After initial
search,shortperiodicreception-signal scanswillcommenceseveral
times a day.
When the RM962A is new and initially set up, reception of the U.S.
Atomic clock signal can take up to 72 hours.
The antenna icon indicates the quality of reception.
When the reception is complete, the radio-reception signal will
stop blinking.
Interference
Receptioncanbeaffectedbyanumberoffactors.Forbestreception,
place the device away from metal objects and electrical appliances.
Note: Interference from sources such as TV sets can affect
the signal. If, after batteries have been inserted for ten
minutes, the signal is not received, then set the time manually
(see section: How To Set The Calendar Clock Manually).
To deactivate the auto-reception of RF signal, press and hold the
ZONE button for 2 seconds. The antenna icon will disappear to
show this deactivation.
To activate the auto-reception again, press and hold the [ ]
button for 2 seconds again and the antenna icon will re-appear.
“SECONDS” AND DAY-OF-THE-WEEK
DISPLAY
The “seconds” and the day-of-the-week share the same section of
the display.
day-of-the-week display “second” display
The day-of-the-week is displayed as an abbreviation in three
languages.
Tochangethe“seconds”displaytotheday-of-the-weekdisplay:
• When the “seconds” are displayed, press MODE once.
Tochangetheday-of-the-weekdisplaytothe“seconds”display:
• When the day-of-the-week is displayed, press MODE once.
STRONG
WEAK
NO RECEPTION
RECEIVING
4
GB
CALENDAR AND ALARM TIME DISPLAY
The calendar and the alarm-time share the same section of the
display.
The calendar is displayed in a month-day format.
calendar mode alarm mode
To change the calendar display to the alarm-time display:
• When the calendar is displayed, press ALARM once.
To change the alarm-time display to the calendar display:
• When the alarm time is displayed, press MODE once.
HOW TO SET THE CALENDAR
CLOCK MANUALLY
If the unit is taken outside of the range of radio signal it will need
to be manually set.
To manually set the clock:
1. When the calendar is displayed, press and hold MODE for two
seconds. The hour value will start to blink.
2. Enter the hour using the [ ] button. Hold down the button to
rapidly increase the value.
3. Press MODE to confirm and proceed to set the minute, year,
month, day and display language.
4. For the display language, you can choose between (E) for
English, (F) for French and (S) for Spanish.
Day-of-the-week
Language Monday Tuesday Wed. Thursday Friday Saturday Sunday
English
French
Spanish
5. When finished, press MODE to return to normal display. If
changes are made on the minutes, the seconds will reset and
start from zero.
HOW TO SET AND ACTIVATE
THE ALARM
Toset thealarm time:
1. Press and hold ALARMfor two seconds when the alarm time is
displayed.
2. Enter the value for the hour digits using the [ ] button. Hold
down the button to rapidly increase the value. Press ALARMto
confirm and go to the minute digits. Enter the value and press
ALARMtoconfirm.
5
GB
3. The alarm is automatically activated. To deactivate it, press
ALARMonce.
ALARM AND SNOOZE FUNCTION
When the alarm is set, it will activate at the set time. The back light
will go on for five seconds and the alarm-on icon [ ] will flash.
The crescendo function allows the alarm to start gently and step up
its intensity in three steps. Without interruption, the alarm will
activate for 2 minutes.
To stop the alarm, press ALARM button. If the
[ ] button is pressed, the snooze function
will be triggered. The alarm will stop for eight minutes before
activating again.
INDOOR TEMPERATURE
The temperature is shown in Fahrenheit (°F). The unit is capable of
measuring temperatures within the 23°F and 122°F range. If the
temperaturegoesaboveorbelowthat,thedisplaywillshow“HHH”
or“LLL”.
HOW TO RESET THE UNIT
The RESET button allows you to return all settings to its factory
values.
The button is required only when the unit is not operating in a
favorable way, such as in the rare case of a malfunction.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any alcohol containing detergent,
abrasive or corrosive materials. They may scratch the plastic
parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shorter electronic life span, damaged battery and distorted
parts.
4. Do not tamper with the unit’s internal components. Doing so
will invalidate the warranty on the unit and may cause
unnecessary damage. The unit contains no user-serviceable
parts.
5. Only use fresh batteries as specified in the user’s instructions.
Do not mix new and old batteries as the old ones may leak.
6. Always read the user’s instructions thoroughly before operating
the unit.
6
GB
SPECIFICATIONS
Operating Temperature : 23°F to 122°F
Clock Functions
Radio Control : Auto synchronize current time and
date by Radio signal generated from
the U.S. Atomic Clock
Calendar : Day of week in English /
French / Spanish
Current month / day format
Clock Time : 12-hour format
Alarm Duration : 2 minute crescendo
Snooze : 8 minutes
Accuracy : +/-0.5 second/day
(when RF is disabled)
Temperature Measurement
Indoor Measurement : 23°F to 122°F (-5°C to 50°C)
Temperature Resolution : 0.2°F (0.1°C)
TemperatureAccuracy : 23°F to 32°F +/-35.6°F
(-5°C to 0°C +/- 2.0°C)
32°F to 104°F +/- 33.8°F
(0°C to 40°C +/- 1.0°C)
104°F to 122°F +/-35.6°F
(40°C to 50°C +/- 2.0°C)
General Specification
Battery Type : Two(2)UM-4or“AAA”size
1.5V battery
Unit Dimension : 4.09 x 2.52 x .83 inches
or 104 x 64 x 21 mm (H x W x D)
Unit Weight : 2.82 ounces or 80 g
(without battery)
With carrying pouch
CAUTION
— The content of this manual is subject to change without
further notice.
— The specification of this product can be changed without
any notice.
— Due to printing limitation, the displays shown in this
manual may differ from the actual display.
— The contents of this manual may not be reproduced
without the permission of the manufacturer.
7
GB
CUSTOMER ASSISTANCE
Should you require assistance regarding this product and its
operation, please contact our customer care department at
WARRANTY
This product is warranted to be free of manufacturing defects for a
period of 90 days from date of retail purchase. Defective product
should be directed to the place of retail purchase for exchange.
Should this not be possible, contact our customer care department
for assistance and a return material authorization. No returns may
bemadewithoutareturnauthorization.Warrantyexchangesrequire
proof of date of purchase (purchase receipt showing date, place and
product purchased).
This warranty does not cover product subjected to abuse, misuse,
accidental damage or tampering.
Indice
Altri manuali Oregon Scientific Orologio
Oregon Scientific
Oregon Scientific RM309P Manuale utente
Oregon Scientific
Oregon Scientific Imola FST-301 Manuale utente
Oregon Scientific
Oregon Scientific RRM320PU Manuale utente
Oregon Scientific
Oregon Scientific RRM320P Manuale utente
Oregon Scientific
Oregon Scientific RM338P Manuale utente
Oregon Scientific
Oregon Scientific RM116E Manuale utente
Oregon Scientific
Oregon Scientific RAR186 Manuale utente
Oregon Scientific
Oregon Scientific PROJI RM338PX Manuale utente
Oregon Scientific
Oregon Scientific RM888PA Manuale utente
Oregon Scientific
Oregon Scientific RRM320P Manuale utente
Oregon Scientific
Oregon Scientific RM313PNA Manuale utente
Oregon Scientific
Oregon Scientific TimeSphere RM382P Manuale utente
Oregon Scientific
Oregon Scientific TW331 Manuale utente
Oregon Scientific
Oregon Scientific RMR682 Manuale utente
Oregon Scientific
Oregon Scientific BAR332ES Manuale utente
Oregon Scientific
Oregon Scientific Jumbo JMR828A Manuale utente
Oregon Scientific
Oregon Scientific RMR329P Manuale utente
Oregon Scientific
Oregon Scientific RM832 Manuale utente
Oregon Scientific
Oregon Scientific BAR623P Manuale utente
Oregon Scientific
Oregon Scientific RMR939P Manuale utente
