Oregon Scientific DCA6808 Manuale utente
Instruction manual
Digital Camera
& Photo Designer CD ROM
Ages 8+
Dear Parent/Guardian
Thank you for choosing the Barbie™ Digital Camera.
Designed and engineered with extreme precision, the Barbie™ Digital Camera is
packed with an awesome Barbie™ Photo Designer CD-ROM.
You can take a maximum of 208 digital pictures (320 X 240 pixels with compression),
save your memories, record cool video clips and use it as a web cam.
The Barbie™ Photo Designer CD-ROM provides loads of photo fun. You can get
creative and decorate your own photos with fun frames, greeting cards, cool
calendars and much more!
Parents, we recommend helping your child with their Barbie™ Digital Camera. This
manual is designed using technical information in order to allow you to achieve the best
results. Some children will need your guidance setting up, learning and understanding
how to use the different aspects of the camera and software.
Your use of the BarbieTM Photo Designer CD-ROM is subject to a License Agreement contained inside the CD.
BARBIE and associated trademarks and trade dress are owned by, and used under license from, Mattel, Inc.
© 2006 Mattel, Inc. All Rights Reserved.
Barbie™ Digital Camera & Photo Designer CD-ROM
I Camera Precautions 1
II Technical Specifications 1
III Computer System Requirements 2
IV Camera Description 2
V Quick Start 3
• Battery Installation 3
• Power On/ Off 3~4
• Taking Photos 4
VI Camera Mode Selections 5~9
VII Download Images and Movie Clips 10
VIII Web Cam mode 11
IX Welcome to PhotoImpression 12
• System Requirements 12
•
Installing ArcSoft PhotoImpression and the Camera Driver
12
B) Technical Specifications
3 in 1 Digital Camera: Digital Still Camera
Video Capturing
Conferencing (Web Cam)
104 images (w/o compression)
Image Sensor: CMOS Sensor
Resolution: VGA 640x480 Pixels
QVGA 320x240 Pixels
Color: 24 bits
Lens: Fixed Focus=6.2mm F/2.5
Capture Range: 0.6mm~infinity
Memory: Built-in 8MB SDRAM
Capacity: 60-150 pictures (compressed VGA)
25 pictures (VGA 640x480)
240-410 pictures (compressed QVGA)
102 pictures (QVGA 320x240)
Power: 1 AAAAlkaline Battery
Computer: USB1.1
Note: The quantity of compressed picture is various and
depending on the scene complexity.
1
A) Camera Precautions
Notice the following guidelines when using your camera.
• Do not place this camera in a damp or dusty location. This may cause a fire or an electrical shock.
• Do not leave this camera in places subject to extremely high temperatures, such as in direct sunlight.
This may affect the camera case and internal components.
• Do not bump or give shock when the camera is activated. This may cause the camera to malfunction.
• Choose a flat surface free from vibration to store the camera.
• When the lens or the viewfinder is dirty, please clean them with a lens brush or soft cloth.
• Under the following circumstances, have the camera repaired by qualified personnel.
a) The cable or plug is damaged or worn.
b) The device has been dropped and/or the casing has been damaged.
c) Liquid has entered the camera.
C) Computer System Requirements (Children should ask for section.)
• Personal computer designed for Win98SE/2000/ME/XP
• A CD-ROM drive to install software, min. 200 MHz microprocessor
• Available USB port
• Color display monitor with a minimum resolution of 800 x 600 24 bits or above
• Hard disk space with a minimum of 200MB or above
D) Functional Parts of the Camera
2
Shutter button
Viewfinder
Lens
USB
Battery Door
Mode button
E) Quick Start
Battery Installation
1. On the back of the camera to the right side slide the panel to you right.
2. Insert Two AAA alkaline batteries into battery compartment.
3. Replace the cover.
Always download photos to PC prior to your replacing batteries to avoid
memory loss.
Note:
a) Do not mix old and new batteries together. Replace all the
batteries at once.
b) Remove the batteries if the camera is not going to be used for
some time. This will save the battery life.
c) Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries
d) Battery installation - should operate under adult supervision.
Note:
When the battery is low and needs to be replaced the LCD screen will
blink as a warning.
Power on/off
Power On
Method 1
Turn the camera on by pressing MODE button.
Method 2
Plug in the USB cable and connect it with your PC and the camera will
be powered by USB power source.
Note:
Before using the PC-Cam function, please download all photos from your
camera to your computer to avoid photos missing.
3
F)Taking Photos
1. Press MODE button to turn on the camera, the camera is set to take high-resolution pictures. The “status LCD”
will show “HI” and frame number “26”. If there are already photos saved in the camera, the frame number will
show on the “status LCD” how many shots are available for shooting.
2. Aim your subject by using the camera viewfinder.
3. Press the “Shutter” button; a snapshot is finished with a distinct beeping sound. At the same time, the number on
the LCD display will increase by one.
Attention:
When the light is not sufficient, the Auto exposure and Gain control need more time to settle, you have to hold the
camera steadily and wait longer time for the beeping sound. If the environment is too dark to take picture, you will
hear “beep beep” sound and no picture can be taken.
4
Power on/off
Power On
Method 1
Press the MODE button until it switches to off mode.
Method 2
If the camera is not used in 30 seconds, it will enter standby
mode automatically to save battery energy.
Note:
If the camera is not in use for a long time, please take out the
battery. Photos will be lost after the battery is taken out.
46+,
5
G) Camera Mode Selection
1) You can cycle through different shooting modes by pressing the “mode button” repeatedly. The “Status LCD”
will display each mode as you press the MODE button again and again.
2) The different MODE icons are show below:
a) Camera function operation
If the MODE button is pressed consecutively, the camera LCD display will show the following symbols:
1) Ready to take Hi-resolution pictures
2) Turn into standby
3) Self timer
4) Continuous capture
5) Capture 3 photos
6) Delete all photos
7) Delete the last picture
8) Change to low-resolution pictures
10) Change to Hi-resolution mode
11) Change to compression mode
12) Change to non-compression mode
13) Change to 50Hz frequency
14) Change to 60Hz frequency.
Change the
frequency to 50Hz
the last
picture
Change to non-
compression mode
Change to
compression mode
Change the
frequency to 60Hz
Ready to take
Low-
Resolution pictures
Turn into standby
mode
Ready to take
Hi-
Resolution pictures
Hi
all pictures
Self timer Continuous
capture
Capture 3 photos
Change to Low-
Resolution mode
Change to Hi-
Resolution mode
Lo Lo
Mode
Hi
Mode
Delete Delete
b) Power Off
To turn the camera off, press the "MODE button" until the
"Status LCD" displays . Then press the "Shutter
Release button". You will hear a "beep" and the
camera will turn off.
c) Self Timer
To enter the self-timer feature, press the "MODE button" until the
"Status LCD" displays . Press the "Shutter
Release button" to activate the timer and start shooting.
There is a 10 second shooting delay. During this interval,
you can hear “beep” sound at every second.
d) Video Clip
Use this mode to capture action or motion shots. The Video Clip can
be downloaded and viewed as a movie or as individual photos.
To access the Video Clip mode, press the "MODE button" until
the "Status LCD" displays .
e) Delete All Photos
To delete all photos stored in your camera, press the "MODE button"
until the "Status LCD" displays . When in
this mode, press the "Shutter Release button" to start deleting all
photos. The symbol “CA” will blink 5 seconds to confirm the
deletion. Press the shutter release button again to delete the photo(s);
otherwise, the delete command will be cancelled and the camera will
revert to the default mode.
Important:
Before activating this mode, make sure that all desirable photos
have been downloaded to your PC.
6
7
f) Delete the Last Photo
To delete the last photo you shot, press the “MODE button”
until the “Status LCD” displays .
Press the “Shutter Release button” to delete the last shot.
Repeat these two steps to individually delete your photos.
g) Resolution
This camera lets you take both high (640 X 480 pixels) and low
(320 X 240 pixels) resolution photos. High resolution photos
are better quality because they have more pixels. Low
resolution photos have fewer pixels but you can take a lot more
photos in low resolution mode. The number of photos your
camera can take depends on both the resolution and the
compression you choose. Please refer to the chart below
(Fig. A) to select the correct resolution and compression for
the number of photos you want to take.
Fig. A
RESOLUTION COMPRESSION NUMBER OF PHOTOS
Hi Hd 52
Ld 26
Lo Hd 208
Ld 104
Note: Since the “Status LCD” can only display two digits, it will show “99”
for any mode settings that let you take 104 or 208 pictures. The “Status
LCD” will continue to show “99” while you take pictures and the camera
will store all your pictures but will not be able to display the remaining shots
available until you have reached 99.
During mode selection, “Hi” stands for high resolution and “Lo”
stands for low resolution.
To switch between high and low resolution, press the “MODE
button” until the “Status LCD” displays either “Lo” or “Hi”. (See
Fig. (16)). If it is set on “Hi”, press the “Shutter Release button”
to switch to “Lo”. If it is set on “Lo”, press the “Shutter Release
button” to switch to “Hi”.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Oregon Scientific Macchina fotografica digitale
Oregon Scientific
Oregon Scientific DS8228 Manuale utente
Oregon Scientific
Oregon Scientific DS8618 Manuale utente
Oregon Scientific
Oregon Scientific GPS-ATC9K Manuale utente
Oregon Scientific
Oregon Scientific PV100B Manuale utente
Oregon Scientific
Oregon Scientific DS6638 Manuale utente
Oregon Scientific
Oregon Scientific ATCMini-S Manuale utente
Oregon Scientific
Oregon Scientific DS9320-15 Manuale utente
Oregon Scientific
Oregon Scientific DS9300 Manuale utente
Oregon Scientific
Oregon Scientific ATC-1000 Manuale utente
Oregon Scientific
Oregon Scientific DS8118 Manuale utente
Oregon Scientific
Oregon Scientific DS6888 Manuale utente
Oregon Scientific
Oregon Scientific DS8238 Manuale utente
Oregon Scientific
Oregon Scientific DS6868 Guida rapida
Oregon Scientific
Oregon Scientific DS6310 Manuale utente
Oregon Scientific
Oregon Scientific DS3868 Manuale utente
Oregon Scientific
Oregon Scientific DS-3898 Manuale utente
Oregon Scientific
Oregon Scientific DS6868 Manuale utente
Oregon Scientific
Oregon Scientific DS8618 Manuale utente
Oregon Scientific
Oregon Scientific DS8118 Manuale utente
Oregon Scientific
Oregon Scientific DS6200 Manuale utente
