Oricore ST-60 Manuale utente
Thank you for your selecting Oricore ST-60 Headset. We hope you enjoy it.
Oricore ST-60 Headset lets you listen to stereo music through your Bluetooth stereo enabled mobile phone, while
ensuring that you never miss a call.
The Oricore ST-60 Headset is compliant with Bluetooth v2.0 Compatible with all mobile phones that support
Bluetooth headset, hands free, A2DP orAVRCP profiles.
- 1 -第1 页共18 页
Contents
About your Oricore ST-60…………………………………………………………………………..……………………….…1
Getting started……………………………………………………………………………..………………….…………………2
Wearing your headset…………………………………….………………………...………………...……………………..…3
Charging your headset…………………………………………………………………………..………………………….….4
Standard charging time……………………………………..……………….……………………………………………5
Talk, standby and stereo music playing time………………………..………………………………….……………...5
Turning your Oricore ST-60 headset on and off…………………………..……………..………………………………..…6
Turning the built-in buzzer on and off…………………………………………………………………………………….……6
Connecting mobile phone automatically when turning on the headset……………………………………….……………7
Pairing your headset………………………………………………………………………………………..……………...…7-8
Using your Oricore ST-60 headset…………………………………………………………………..……………………9-10
Answering/Rejecting a call……………………………………………………………………………………...……9
Ending a call………………………………………………………………………………………………….…...……9
Dialing from your mobile phone…………………………………………………..…………………………. ..……9
Voice dialing from your headset……………………………………………………………………..…………………10
Last number redialing from your headset……………………………………………………………………………..10
Adjusting the volume………………………………………………………………………………………………....…11
Remote control function……………………………………………………………………………………….……….11
Silence your call……………………………………………………...……………………………………….……….11
Care and maintenance…………………………………………………………………………………………………….12-13
Safety information……………………………………………………………………………………………….……………..14
Troubleshooting……………………………………………………………………………………………….……………….15
Compatibility……………………………………………………………………………………………………..………..……15
Product specifications…………………………………………………………………………………………………………16
About your Oricore ST-60
- 2 -第2 页共18 页
Fig.1
Fig.2
- 3 -第3 页共18 页
Getting started
To use your Oricore ST-60 headset, you are only required to following simple procedures：
zCharge your headset
zPair your headset with a Bluetooth-enabled mobile phone
Instructions on how to follow these procedures are detailed in this user guide.
- 4 -第4 页共18 页
Wearing your headset
Fig.3
- 5 -第5 页共18 页
Charging your headset
Fig.4
The Oricore ST-60 headset comes with a built-in rechargeable battery
Prior to using the headset for the first time, it is recommended that you fully charge the battery.
- 6 -第6 页共18 页
Charging Your Headset
Connect the charger to an A/C wall outer（mains socket）and the charger
Plug to the headset’s charging socket（fig.4）.the LED will be red whilst charging.
Standard charging time
Make sure that your headset is fully charged for 2 hours before you start using it ，when the battery is fully charged，
the red LED will turn off.
Disconnect the charger from AC wall outlet （mains socket）and the headset .
Press and hold the MFB（fig.1）for 2 seconds to turn the headset on.
Please refer to “turning your headset on and off” on the next page.
Talk, standby and stereo music playing time
The fully charged battery offers up to 7.5 hours talk time, 4 hours stereo music playing and up to 180 hours standby
time. When no calls are in progress, the headset remains turned on in standby mode.
- 7 -第7 页共18 页
Turning your Oricore ST-60 headset on and off
Turning on the headset
Press and hold the MFB for 3 seconds, the LED will turn on in blue and you will hear a beep, that is to say the
headset has been turned on.
Turning off the headset
Press and hold the MFB for 4 seconds until you hear a long beep, the LED will turn red for 2 seconds, then the LED
will stop flashing.
Turning the built-in buzzer on and off
Turning on the built-in buzzer
Press and hold the next track key for 5 seconds until you hear a long beep.
Note The built-in buzzer is set to “on ”.
Turning off the built-in buzzer
Press and hold the next track key for 5 seconds until you hear two short beeps.
Now, when there is an incoming call, the ringing tone will only be heard through the earphone.
Note: This function varies with the mobile phones. If connected with the music from the mobile
phones which supporting Bluetooth A2DP profiles, you will hear no beep from the built-in buzzer,
however, you can have a ringing tone from the headset. If connected with a single track mobile
phone, the built-in buzzer keeps normal.
- 8 -第8 页共18 页
Connecting mobile phone automatically when turning on the headset
After Bluetooth headset is switched on, it will automatically connect to the last pairing mobile phone.
If headset is still not connected with your mobile phone or does not connect to the AV source, please press MFB, the
Bluetooth headset will connects the last paring mobile phone.
Anytime, headset does not connect to the mobile phone, please press up or push down volume key for 2 seconds,
your headset will connect to the last paring mobile phone. Also if it doesn’t connect to the AV source, please press
the previous track and the next track key, the headset will connect to the last connecting AV source.
Pairing your headset
Prior to using your headset for the first time, you must pair it with a Bluetooth-enable mobile phone.
The information on the following page describes pairing instructions for a typical Bluetooth-enable mobile phone .
Headset pairing procedures can vary depending on the type of model of your mobile phone.
- 9 -第9 页共18 页
Pairing Your Headset
1. Place the headset and the mobile phone where they are easily viewable and no more than 1 meter apart.
2. Ensure the headset is turned OFF.
3. Press and hold the MFB for five seconds until the headset LED alternately flashes blue and red.
4. Activate your mobile phone’s Bluetooth function by referring to your mobile phone user guide for details.
5. Set the mobile phone to search for Bluetooth devices within a 1 meter range as instructed in the mobile phone
user guide and select ” Oricore ST-60 “ from the list.
6. Enter the preprogrammed passkey”0000”and press”OK” to pair your headset and mobile phone. When the
pairing is completed, the headset LED will recover to regular flash blue status.
7. Go back to your mobile phone’s main menu. For certain mobile phone models, a headset icon will be shown on
the screen. You should now be able to make and receive calls using your headset.
IMPORTANT lf the pairing is successful; the LED will recover to flash blue regularly. If the paring isn’t
successful, the LED still alternately flash blue and red or mobile phone shows: 'No devices found’, here,
you should be pairing again.
- 10 -第10 页共18 页
Indice
Altri manuali Oricore Cuffia
