ORIGO Digital compass watch Manuale utente
UK-1
UK-2
CONTENTS
FEATURES UK-3
KEY ARRANGEMENT UK-4
MODE OPERATION UK-5
TIME UK-6
STOP WATCH UK-8
DAILY ALARM UK-9
COUNTDOWN TIMER UK-11
DUAL TIME UK-13
DIGITAL COMPASS UK-14
COMPASS CALIBRATION UK-15
DECLINATION SET UK-17
BATTERY REPLACEMENT UK-19
CARE OF YOUR WATCH UK-20
UK-3
FEATURES
- Digital compass with 16 cardinal point segments
display
- Digital direction indication in degree with
1 degree interval
- Time with HOUR, MINUTE, SECOND, MONTH,
DATE and WEEKDAY
- Support both 12/ 24 hour display format.
- 4 daily alarms with hour and minutes
- Hourly Chime signal
- 1/100s resolution chronograph with 24 hours
working range
- Chronograph with split function & bar graph
animation
- 1 second resolution count down timer with 24
hours working range
- Dual time
- EL backlight with 3 seconds delay
UK-4
KEY ARRANGEMENT
UK-5
MODE OPERATION
UK-6
TIME
Use the time mode to set and view the current time
and date.
To turn the hourly chime signal ON/OFF:
1. In the Time Mode, press START/STOP button to
turn it on and off. Bell icon indicates the Hourly
Chime signal is ON.
2. If it is ON, the indicator is shown on the
display in all modes.
3. The watch beeps twice every hour on the hour
if it turns on.
To reset the seconds count to zero:
1. Hold down RESET/SPLIT button for 2 sec. Until
the second digits start to flash, which indicates
in setting screen.
2. Press START/STOP button to reset the seconds
count to 00. if the seconds count is in the range
of 30 to 59, the minutes will add by 1 together.
3. Press RESET/SPLIT button to exit the setting
screen.
UK-7
To set time and date
1. In the Time mode, hold down REST/SPLIT button
until the second digits start to flash. The “Hold To
Set” text will appear at once when press
RESET/SPLIT button.
2. The year digits display instead of the day of week
in the setting screen.
3. Press MODE button to move the flashing I the
sequence shown below to select other setting.
4. While a setting is flashing, press START/STOP to
increment it. When the 12/24-hour setting is
selected, press START/STOP button to toggle
between 1-hour and 24-hour format.
5. Press RESET/SPLIT button to exit the setting
screen.
Initial setting:
12:00:00 (AM) / 12:00:00 (24Hr) 2003 Jan 1 WED
UK-8
STOP WATCH
Measuring elapsed time and split times:
1. The display range of the stopwatch is 23hr 59min
59.99 sec.
2. The stopwatch continues to run, restarting from
zero after it reaches its limit, until you stop it.
3. The stopwatch measurement operation continues
even if you exit the Stopwatch mode.
4. Split Time display will be cancelled if you exit the
Stopwatch Mode.
To measure times with the stopwatch:
Elapsed Time
Split Time
UK-9
DAILY ALARM
The alarm sounds at the preset time for about
30 seconds (in all modes), or unitl pressing
any button to stop it. To select the daily alarm
and turn it on and off:
1. In the Alarm mode, press START/STOP button
once to scroll to the diffeent daily alarm.
2. Press and hold START/STOP button for 1 second
to turn on and off current displayed alarm. Icon
indicates alarm is ON.
3. If alarm is on, the alarm on indicator is shown on
the display in all modes.
To set the alarm time:
1. In the Alarm mode, hold down RESET/SPLIT for
2 sec. Until the minute digits of the alarm time start
to flash. This automatically turns on the alarm.
2. The “Hold To Set” text will appear at once when
press RESET/SPLIT button.
3. Press MODE button to move the flashing
between the minute and the hour.
UK-10
4. Press RESET/SPLIT button to exit the setting
screen.
Initial Setting:
7:00 (AM) / 7:00 (24hr) & Alarm & Chime OFF
Indice
Altri manuali ORIGO Orologio
