Orolia SecureSync 2400 Manuale utente

SecureSync

2400 MODEL

User Manual

Document Part No.: 2400-5000-0050

Revision: 2

Date: 15-February-2021

orolia.com

The information in this document has been carefully reviewed and is believed to be accurate and up-to-

date. Orolia assumes no responsibility for any errors or omissions that may be contained in this doc-

ument, and makes no commitment to keep current the information in this manual, or to notify any person

or organization of updates. This User Manual is subject to change without notice. For the most current

version of this documentation, please see our web site at orolia.com.

Orolia reserves the right to make changes to the product described in this document at any time and

without notice. Any software that may be provided with the product described in this document is fur-

nished under a license agreement or nondisclosure agreement. The software may be used or copied only

in accordance with the terms of those agreements.

End-user customers of Orolia products may, without the need for a written license from Orolia, repro-

duce and modify any Orolia product documentation accompanying such products, for distribution within

their organization in order to use the products.

Orolia authorized partners, systems integrators, government contractors, and other similarly-situated

third-party installers may, without the need for a written license from Orolia, reproduce Orolia product

documentation (including media type changes) and create derivative works thereof in the form of com-

pilations, for distribution to their end-users.

Except as described above, no part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or any means electronic or mechanical, including photocopying and recording for

any purpose without the written permission of Orolia.

Other products and companies referred to herein are trademarks or registered trademarks of their

respective companies or mark holders.

Orolia USA, Inc.

• 45 Becker Road, Suite A, West Henrietta, NY 14586 USA

• 3, Avenue du Canada, 91974 Les Ulis, France

The industry-leading Spectracom products you depend on are now brought to you by Orolia, the global

leader in Resilient Positioning, Navigation and Timing Solutions.

Do you have questions or comments regarding this User Manual?

èE-mail: techpubs@orolia.com

Warranty Information

See the website:http://www.orolia.com/support/spectracom/warranty-information for a copy of

Orolia's Limited Warranty policy.

SecureSync 2400 User Manual I

Blank page.

II SecureSync 2400 User Manual

CONTENTS

SecureSync 2400 User Manual • TABLE OF CONTENTS III

CHAPTER 1

Product Description 1

1.1 Getting Started 2

1.2 SecureSync Introduction 2

1.2.1 SecureSync's Inputs and Outputs 3

1.3 SecureSync Front Panel 3

1.3.1 Status LEDs 4

1.3.1.1 Blinking Intervals 4

1.3.1.2 LED Lighting Patterns 5

1.3.1.3 Legend, individual LEDs 5

1.3.2 Front Panel Keypad, and Display 6

1.3.2.1 Using the Keypad 6

1.3.2.2 Using the Front Panel Display 7

1.4 Unit Rear Panel 11

1.5 Option Cards 13

1.5.1 Option Cards Overview 15

1.5.2 Option Card Identification 18

1.5.2.1 Option Card Identification by ID/Part Number 19

1.5.3 Option Card Connectors 21

1.6 Specifications 22

1.6.1 Input Power 23

1.6.2 GNSS Receiver 23

1.6.3 10 MHz Output 24

1.6.3.1 10 MHz Output — Oscillator Phase Noise (dBc/Hz) 25

1.6.4 Multi I/O 25

1.6.5 DCLS Output 27

1.6.5.1 1PPS Output 27

1.6.6 10/100/1000 Ethernet Port (RJ45) 28

1.6.7 10/100/1000 Ethernet Port (SFP) 28

1.6.8 RS-232 Serial Port (Rear Panel) 28

1.6.9 USB Serial Port (Front Panel) 28

1.6.10 Protocols Supported 28

1.6.11 Mechanical and Environmental Specifications 29

1.7 The SecureSync Web UI 30

1.7.1 The Web UI HOME Screen 30

1.7.2 The INTERFACES Menu 31

1.7.3 The Configuration MANAGEMENT Menu 31

1.7.4 The TOOLS Menu 32

1.8 Regulatory Compliance 33

CHAPTER 2

SETUP 35

2.1 Installation Overview 36

2.1.1 Main Installation Steps 36

2.2 Unpacking and Inventory 37

2.3 Required Tools and Parts 38

2.3.1 Required GNSS Antenna Components 38

2.4 SAFETY 39

2.5 Mounting the Unit 41

2.5.1 Rack Mounting (Ears) 42

2.6 Connecting the GNSS Input 43

2.7 Connecting Network Cables 44

2.8 Connecting Inputs and Outputs 45

2.9 Connecting Supply Power 45

2.9.1 Using AC Input Power 45

2.9.2 Hotswap Power Supply 46

2.10 Powering Up the Unit 47

2.11 Zero Configuration Setup 48

2.11.1 Using Zeroconf 49

2.12 Setting up an IP Address 49

2.12.1 Dynamic vs. Static IP Address 50

2.12.2 Assigning a Static IP Address 51

2.12.2.1 Setting Up an IP Address via the Front Panel 51

2.12.2.2 Setting Up a StaticIP Address via a DHCP Network 53

2.12.2.3 Setting Up an IP Address via the Serial Port 54

IV SecureSync 2400 User Manual • TABLE OF CONTENTS

2.12.2.4 Setting up a Static IP Address via Ethernet Cable 55

2.12.3 Subnet Mask Values 55

2.13 Accessing the WebUI 56

2.14 Configure Network Settings 58

2.14.1 General Network Settings 59

2.14.2 Network Ports 60

2.14.3 Network Services 62

2.14.4 Static Routes 62

2.14.5 Access Rules 64

2.14.6 HTTPS 65

2.14.6.1 Accessing the HTTPS Setup Window 65

2.14.6.2 About HTTPS 67

2.14.6.3 Supported Certificate Formats 67

2.14.6.4 Creating an HTTPS Certificate Request 68

2.14.6.5 Adding HTTPS Subject Alternative Names 71

2.14.6.6 Requesting an HTTPS Certificate 72

2.14.6.7 Uploading an X.509 PEM Certificate Text 74

2.14.6.8 Uploading an HTTPS Certificate File 75

2.14.7 SSH 76

2.14.8 SNMP 83

2.14.8.1 SNMP V1/V2c 87

2.14.8.2 SNMP V3 89

2.14.8.3 SNMP Traps 91

2.14.9 VLAN Support 93

2.14.10 System Time Message 94

2.14.10.1 System Time Message Format 95

2.15 Configure NTP 96

2.15.1 Checklist NTP Configuration 96

2.15.2 The NTP Setup Screen 97

2.15.3 Dis-/Enabling NTP 99

2.15.4 Viewing NTP Clients 99

2.15.5 Restoring the Default NTP Configuration 100

2.15.6 NTP Output Timescale 101

2.15.7 NTP Reference Configuration 102

2.15.7.1 The NTP Stratum Model 102

2.15.7.2 Configuring "NTP Stratum 1" Operation 103

SecureSync 2400 User Manual • TABLE OF CONTENTS V

2.15.7.3 Configuring "NTP Stratum Synchronization" 104

2.15.8 NTP Servers and Peers 105

2.15.8.1 The NTP Servers and NTP Peers Panels 106

2.15.8.2 NTP Servers: Adding, Configuring, Removing 107

2.15.8.3 NTP Peers: Adding, Configuring, Removing 109

2.15.9 NTP Authentication 111

2.15.9.1 NTP: Symmetric Keys (MD5) 111

2.15.10 NTP Access Restrictions 114

2.15.11 Enabling/Disabling NTP Broadcasting 116

2.15.12 NTP over Anycast 117

2.15.12.1 Configuring NTP over Anycast (General Settings) 118

2.15.12.2 Configuring NTP over Anycast (OSPF IPv4) 119

2.15.12.3 Configuring NTP over Anycast (OSPF IPv6) 120

2.15.12.4 Configuring NTP over Anycast (BGP) 121

2.15.12.5 Configuring Anycast via NTP Expert Mode 122

2.15.12.6 Testing NTP over Anycast 125

2.15.13 NTP Orphan Mode 125

2.15.14 Host Disciplining 126

2.15.15 NTP Expert Mode 126

2.15.16 Orolia Technical Support for NTP 129

2.16 Configuring PTP 129

2.16.1 The PTP Screen 130

2.16.1.1 The PTP Settings Panel 131

2.16.1.2 The PTP Statistics Panel 133

2.16.2 Enabling/Disabling PTP 134

2.16.3 General Configuration Notes 134

2.17 GPSD Setup 134

2.18 Configurable Connectors 136

2.18.1 BNC DCLS OUT 136

2.18.2 DB15 Multi I/O 136

2.18.3 Assigning Signals 138

2.18.4 Network Ports 140

2.19 Configuring Input References 140

2.19.1 How to Configure an Input Reference 140

2.19.2 Configure a 1PPS Input 141

2.19.3 Configure an ASCIIInput 142

VI SecureSync 2400 User Manual • TABLE OF CONTENTS

2.19.4 Configure a HaveQuick Input 145

2.19.5 Configuring an IRIGInput 146

2.20 Configuring Outputs 148

2.20.1 How to Configure an Output 148

2.20.2 Configuring a 1PPS Output 149

2.20.3 Configuring the 10 MHz Output 150

2.20.4 Configure an ASCII Output 151

2.20.5 Configuring a GPIOOutput 153

2.20.6 Configuring a HaveQuick Output 154

2.20.7 Configuring an IRIG Output 156

2.20.8 The Outputs Screen 159

2.20.9 The 1PPS and 10MHz Outputs 159

2.21 The Option Cards Screen 160

2.22 Signature Control 161

CHAPTER 3

Managing Time 165

3.1 The Time Management Screen 166

3.2 System Time 167

3.2.1 System Time 168

3.2.1.1 Configuring the System Time 168

3.2.1.2 Timescales 169

3.2.1.3 Manually Setting the Time 171

3.2.1.4 Using Battery Backed Time on Startup 173

3.2.2 Timescale Offset(s) 175

3.2.2.1 Configuring a Timescale Offset 175

3.2.3 Leap Seconds 176

3.2.3.1 Reasons for a Leap Second Correction 176

3.2.3.2 Leap Second Alert Notification 177

3.2.3.3 Leap Second Correction Sequence 178

3.2.3.4 Configuring a Leap Second 178

3.2.4 Local Clock(s), DST 179

3.2.4.1 Adding a Local Clock 179

3.2.4.2 DST Examples 181

3.2.4.3 DST and UTC, GMT 182

SecureSync 2400 User Manual • TABLE OF CONTENTS VII

3.3 Managing References 183

3.3.1 Input Reference Priorities 183

3.3.1.1 Configuring Input Reference Priorities 184

3.3.1.2 The "Local System" Reference 187

3.3.1.3 The "User/User" Reference 188

3.3.1.4 Reference Priorities: EXAMPLES 191

3.3.2 Reference Qualification and Validation 194

3.3.2.1 Reference Monitoring: Phase 194

3.3.2.2 BroadShield 195

3.3.3 The GNSS Reference 203

3.3.3.1 Reviewing the GNSS Reference Status 204

3.3.3.2 Determining Your GNSS Receiver Model 208

3.3.3.3 Selecting a GNSS Receiver Mode 209

3.3.3.4 Setting GNSS Receiver Dynamics 212

3.3.3.5 Performing a GNSS Receiver Survey 214

3.3.3.6 GNSS Receiver Offset 215

3.3.3.7 Resetting the GNSS Receiver 216

3.3.3.8 Deleting the GNSS Receiver Position 217

3.3.3.9 Manually Setting the GNSS Position 219

3.3.3.10 GNSS Constellations 221

3.4 Holdover Mode 224

3.5 Managing the Oscillator 228

3.5.1 Oscillator Types 229

3.5.2 Configuring the Oscillator 230

3.5.2.1 Time Figure of Merit (TFOM) 231

3.5.3 Monitoring the Oscillator 233

3.5.4 Oscillator Logs 235

CHAPTER 4

System Administration 237

4.1 Powering Up/Shutting Down 238

4.1.1 Powering Up the Unit 238

4.1.2 Shutting Down the Unit 238

4.1.3 Issuing the HALT Command Before Removing Power 239

4.1.4 Rebooting the System 240

4.2 Notifications 241

4.2.1 Configuring Notifications 242

VIII SecureSync 2400 User Manual • TABLE OF CONTENTS

Altri manuali per SecureSync 2400

Indice

Altri manuali Orolia Apparecchiature di registrazione

Orolia

Orolia Spectracom VersaPNT Manuale utente

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura