ORQA FPV.ONE Manuale utente
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
FPV VIDEO GOGGLES
User Manual
Rev. 1.2 | December 2019.
EN
2
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
TABLE OF CONTENTS
PACKAGE CONTENTS.....................................................................................3
GETTING TO KNOW THE GOGGLES............................................................ 4
CONTROLLING THE GOGGLES ....................................................................7
NAVIGATING THE MENUS ..............................................................................8
RECEIVER SETTINGS.......................................................................................9
INPUT SOURCE................................................................................................10
IMAGE SETTINGS............................................................................................11
STAND BY..........................................................................................................12
FEATURES.........................................................................................................13
BATTERY...........................................................................................................14
ABOUT................................................................................................................15
DVR......................................................................................................................16
VIDEO PLAYBACK ..........................................................................................19
CONNECTIONS PINOUT ................................................................................20
ORQA ORIGINAL BATTERY..........................................................................21
CHARGING THE BATTERY ...........................................................................22
TECHNICAL SPECIFICATIONS ....................................................................23
3
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
PACKAGE CONTENTS
CARRYING CASE
GOGGLES
FOAM PADS
BATTERY
OPTICS CLEANING
CLOTH
MICRO HDMI –HDMI CABLE
(OPTIONAL)
4
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
GETTING TO KNOW THE GOGGLES
1. Power On/Off
2. Defogging Fan
3. Right Menu Navigation
4. Left Menu Navigation
5. Battery Check
6. DVR Quick Record
7. Channel Down
8. Channel Up
9. Defogging Air Intake
10. Cooling Air Exhaust
11. Left IPD Adjust Wheel
12. Right IPD Adjust Wheel
13. Cooling Air Intake
5
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
GETTING TO KNOW THE GOGGLES
14. Audio Out / Mic In
15. Head Tracker Output
16. Receiver Bay
17. Power Connector
18. AV Input
19. MicroHDMI Input
20. Secondary Bay
21. Module Interface FFC
6
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
GETTING TO KNOW THE GOGGLES
22. Micro SD Card Slot
23. Diopter Slot
24. Stand-By Sensor
7
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
CONTROLLING THE GOGGLES
Power Button
Press the Power Button to power the goggles On or Off .
There are different power-on modes. Check page 13 for more information.
Fan Button
To prevent the lenses from fogging due to high humidity or sweat, use the
defogging fan. Press the Fan Button to turn the fan on or off .
Right-hand Joystick
Use the Right-hand joystick to access the DVR menu .
Left-hand Joystick
Use the Left-hand Joystick to access the main menu .
Battery Check
Press the Battery Check Button to show the battery status .
DVR Quick Record
Press the DVR Quick Record Button to start/stop recording with DVR .
Channel Down
Press the Channel Down Button to change the receiver channel down .
Additionally, long press this button to change the receiver band.
Channel Up
Press the Channel Up Button to change the receiver channel up .
Additionally, long press this button to change the receiver band.
8
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
NAVIGATING THE MENUS
There are two main menus that are accessible via the two corresponding
joysticks on the top side of the goggles.
The Left-hand joystick controls the main menu. The main menu incorporates
all the main controls and goggles settings.
The Right-hand joystick controls the additional menu which is used mainly to
adjust the Digital Video Recorder and Video Playback settings.
To enter the main or additional menu simply press the corresponding joystick.
Once inside the menu move the corresponding joystick up, down, left or right in
order to select the required setting.
Confirm/save the set value by pressing the corresponding joystick.
To exit the menu, move the joystick to the left or wait for 10 seconds to
automatically exit the menu.
Changes will be saved only if the menu is closed before turning the goggles off.
9
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
RECEIVER SETTINGS
In this menu, you can select the receiver module that you have installed into the
main receiver module bay.
In order to control the different receiver modules directly from the goggles, it is
important to select the receiver module that you are using.
Also, by selecting the correct module the goggle’s OSD and module’s OSD will
work together without conflicting with each other.
For example, if RapidFire is selected, you will be able to change the channel by
short pressing the CHANNEL UP or CHANNEL DOWN buttons on the
goggles.
A long press on the CHANNEL UP or CHANNEL DOWN buttons changes
the band on the receiver module.
Additionally, by entering the channel table in the menu you can select the desired
frequency of the RapidFire receiver module.
Please note that RapidFire firmware must be updated to at least version 1.3. to
have the full functionallity with the Orqa goggles.
10
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
INPUT SOURCE
INPUT SOURCE is used to set the goggles video input source.
You can select between: Receiver, HDMI, AV in and AUTOMATIC.
AUTOMATIC setting will bring up the image from the input you feed to the
goggles.
When automatic mode is on, the default setting is Receiver, but as soon as you
plug in another source it will automatically switch to that input.
If an HDMI source with an unsupported signal is connected, the “Unsupported
HDMI Input” message will appear on-screen.
Automatic setting priority
1. HDMI
2. AV in
3. RX
Please note that the splash screen
with the Orqa logo will be displayed if
there is no valid input signal present.
Altri manuali per FPV.ONE
1
Indice
