Ortech OD-LLG Manuale utente

OPERATION

Light Grille

PART # OD-LLG

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.

Electrical products can cause death or injury, or damage to property.

If in any doubt about the installation or use of this product, consult a competent technician.

INSTALLATION GUIDE

WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN.

1. LED light power is 11W

2. The fan & LED light can be operated separately

Instruction Manual

1-888-543-6473

1-888-541-6474

13376 Comber Way

Surrey BC V3W 5V9

[email protected]

www.ortechindustries.com

375 Admiral Blvd

Mississauga, ON L5T 2N1

AUTION

CAUTION

WIRING

1. Remove the wire panel. Insert the light wire into wire panel.

Connect electrical wiring while referring to the diagrams from

the WIRING section below

2. Insert the plug from the control box and LED light grille

assembly into the suitable wire panel

3. Install grille assembly to the fan

Light

wire

Wire

panel

Light

switch

Fan

switch

BLK

WHT

GRD

LINE

IN

SWITCH

BOX

BLU

WHT

BLK

WHT

LIGHT

FAN

UNIT

BLACK (BLK)

BLUE (BLU)

Light

Fan

SWITCH

BOX

Power supply

120V AC

WHITE (WHT)

GROUND (GRD)

Wire

panel

Fan

receptacle

Light

receptacle

UNIT

INSTALLATION GUIDE FOR LED GRILLE WITH FIRE DAMPER

Instruction Manual

1-888-543-6473

1-888-541-6474

13376 Comber Way

Surrey BC V3W 5V9

[email protected]

www.ortechindustries.com

375 Admiral Blvd

Mississauga, ON L5T 2N1

Installation with LED Grille & Fire Damper

1. Remove the damper from the flange (4 screws)

(see Fig.1)

2. Open the quick connect seat, and place the LED

extension cable in the cut out seat. Optionally,

open the lower port to fish out the cables.

Reconnect the seat and bottom port (see Fig.2)

3. Connect the fan to the quick connect, and slide on

the flange, then connect the LED quick connect to

the new quick connect port from step 2 (see Fig.3)

4. Slide the damper flange into the fan and re-attach

the fire damper to the damper flange. Make sure

the LED wire is behind the u-tab to reduce risk of

pinching. Secure the flange & fire damper

together using the 4 screws from step 1 (see Fig.4)

5. Using the two mounting clips, connect the LED

grille to the damper (see Fig.5) Fig.1 Fig.2

Fig.3Fig.4Fig.5

ORTECH reserves the right to modify at any time, without notice, any or all of our product's

features, designs, components and specifications to meet market changes.

Light Grille

PART # OD-LLG

Indice

Altri manuali Ortech Attrezzatura di illuminazione

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente