Oru Kayak Beach LT Istruzioni per l'installazione
IMPORTANT
Read this entire Assembly
Guide before assembling
your Oru Kayak.
Watch the instruction video:
www.orukayak.com/assembly/beachlt
SERVICE@ORUKAYAK.COM
BEACH LT
SCAN AND
WATCH ON
YOUR PHONE
Assembly Guide (Pages 1-10)
Disassembly Guide (Pages 11-15)
WWW.ORUKAYAK.COM 1
A
The lid becomes
the kayak’s floorboard.
Loosen and slide off the two loops
that go around box. Set shoulder
strap aside (you won’t need it while
kayaking).
Lift the lid off. This will become
the kayak’s floorboard.
Unclip the buckles on the sides.
Remove the loose kayak components
packed into the box. [See page 3 for a
list of loose components.] Additional
components are permanently
attached to the hull/deck.
A
B
C
Step 1: Open the Oru Kayak box
The box contains all the components needed for assembly and
includes space to store gear—such as our 4-piece paddle.
B
C
C
2 4 5 67
1 31
2 ORU KAYAK | BEACH LT KAYAK ASSEMBLY GUIDE
Shoulder strap: Used to carry
the kayak when in box form.
Stow out of the way while
kayaking.
Floorboard: Reinforces kayak
bottom and holds the seat.
Bow (front) bulkhead/Footrest:
Attached to the front half of
the kayak. Provides structural
rigidity and comfort.
1
2
3
TOP
TOP
TOP
Seat column plate
Seat pad bungee
Getting Familiar components
assembly
Backrest: Includes the seat column
and adjustable backrest.
Seat pad: Tucks under the
bungee in the floorboard.
Stern (back) bulkhead:
Provides structural rigidity.
5
TOP
TOP
TOP
Seat column
Backrest
Spare parts kit: Extra hardware for
repairs and upkeep.
6
Bulkhead channels: Attach to
the inner hull. Hold the two
bulkheads in securely.
7
8
4
Footrest
WWW.ORUKAYAK.COM 3
NOTE
The double-walled corrugated poly-
propylene that Oru Kayaks are made
from will naturally show marks and
scratches from use over time. As long
as the hull is not punctured, there is
nothing to worry about. Think of them
like marks and scratches on thick
leather boots.
Hold the two folds at the orange
stickers. Pull as
indicated in the illustration to
open. The skin will be stiff.
Push the ends apart to extend
the box into a long sheet.
Pop the hull flat with your
hands as you extend it,
pushing down the inverted
folds, creating a bowl shape.
A
B
C
A
A
Step 2: Unfold the box
C
PUSH DOWN
SIDES POP UP TO
CREATE BOWL SHAPE
PROFILE VIEW
B
Pull
Pull
2 4 5 67
1 32
4 ORU KAYAK | BEACH LT KAYAK ASSEMBLY GUIDE
1
6
2
4
BOW
(front)
STERN
(back)
Footrest: For stability and to keep
your legs comfortable.
End straps: Help keep the
bow and stern tightly closed.
Fairings: Close the boat at the
bow and stern and include
handles for carrying
the kayak.
Deck buckles: Close the deck and
hold the kayak together.
Adjustable footrest straps: Clip
to the footrest to keep it in place.
In box form, these serve as box
closure straps.
Adjustable seatback straps: Clip
to the seatback to keep it in place.
In box form, these serve as box
closure straps.
Carrying handles: Make the kayak
easy to pick up and carry.
1
5
6
7
2
34
Parts: Hull/deck The box becomes the hull and deck of the kayak. Several key parts are permanently
attached to the hull/deck. The bow (front) and stern (back) of the Oru Kayak are
different, so pay attention to orientation throughout the assembly process.
7
3
4
5
WWW.ORUKAYAK.COM 5
Fold in flaps on sides
of cockpit.
Pull footrest and bulkhead
into hull.
Clip footrest to adjustable
footrest straps as shown.
A
B
C
C
STERN
BOW
A
A
B
C
Footrest
C
Step 3: Attach the footrest
2 4 5 67
1 3
3
6 ORU KAYAK | BEACH LT KAYAK ASSEMBLY GUIDE
D
D
C
F
A2
B
bulkhead channels
1Make sure the ends
are inverted.
2Fully tighten the end
strap at bow (front).
Place attached bow bulkhead
in bulkhead channels and forward
towards cockpit of screw. You may
have to hold
it there while starting the
next step.
Place flap with curved edge
(adjustable buckles) over flap with
straight edge, as shown. Engage
the cockpit side release buckle.
Tighten by pulling the strap.
Buckle the other two straps.
Tighten by pulling the strap.
Attach velcro to top of
bulkhead, as shown in close-up.
Stretch front fairing over the bow,
and clip the small buckle onto last
deck strap and tighten.
A
B
C
D
A2
E
velcro
(front)
screw (behind)
bow >
< cockpit
F
Step 4: Close the front of the kayak
A1
E
F
Place flap with curved
edge (adjustable buckles)
over flap with straight
edge
2 4 5 67
1 3 4
WWW.ORUKAYAK.COM 7
A
B
bulkhead channels
screw (behind)
Fully tighten the stern (back) end
strap.
Place loose stern bulkhead in
bulkhead channels as shown
(make sure the side with velcro
is on top). You may have to hold
it there while starting the next
step.
Place flap with curved edge
(adjustable buckles) over flap
with straight edge, as shown.
Engage the cockpit side release
buckle. Tighten by pulling the
strap. Buckle the other two
straps.
Attach velcro to top of bulkhead
as shown, like in Step 4.
Stretch rear fairing over the
stern, and clip the small buckle
onto last deck strap and tighten.
A
B
C
D
velcro
(front)
stern >
< cockpit
Step 5: Close the back of the kayak
Closing the back of the kayak is similiar to closing the front (Step 4).
NOTE
If the fairings won’t
stretch over, make
sure the ends
are inverted.
E
C
E
2 4 5 67
1 3 5
8 ORU KAYAK | BEACH LT KAYAK ASSEMBLY GUIDE
A
STERN
BOW
Orient floorboard relative to
hull as shown (seat back plate
towards stern).
Bend floorboard upward as
shown below. Place edges of
the floorboard into channels.
Press center of floorboard
down and push floorboard into
channels (floorboard may not
sit flat until the
next step).
A
B
C
TOP
TOP
TOP
C
B
STERN
BOW
FLOORBOARD CHANNELS
Step 6: Insert the floorboard
FLOORBOARD FLOORBOARD
CHANNELS
CROSSSECTION VIEW
PUSH DOWN
2 4 5 6 7
1 3 6
WWW.ORUKAYAK.COM 9
2 4 5 6 7
1 3
Insert the bottom of seat
column into slot of seat
column plate on floorboard.
Clip seat back straps into
buckles on carrying handles.
Conenct the two clips to the
cord loops on the back end of
the floorboard chanel.
Place seat pad under bungee
on floorboard.
Connect the tension strap
together and tighten until the
buckle reaches the stop in the
strap.
A
B
C
D
A
D
C
E
CLOSEUP
Pull plate in the direction of
the arrow to insert column.
Step 7: Install the seat and tension strap
A
B
E
E
Altri manuali per Beach LT
3
Indice
Altri manuali Oru Kayak Barca
Oru Kayak
Oru Kayak Beach LT Sport Istruzioni per l'installazione
Oru Kayak
Oru Kayak BAY Manuale utente
Oru Kayak
Oru Kayak BAY+ Manuale utente
Oru Kayak
Oru Kayak BAY ST Manuale utente
Oru Kayak
Oru Kayak COAST XT Manuale utente
Oru Kayak
Oru Kayak BAY ST Istruzioni per l'installazione
Oru Kayak
Oru Kayak Beach LT Manuale utente
Oru Kayak
Oru Kayak HAVEN TT Manuale utente
Oru Kayak
Oru Kayak LAKE Manuale utente
Oru Kayak
Oru Kayak HAVEN Manuale utente
Oru Kayak
Oru Kayak COAST XT Istruzioni per l'installazione
Oru Kayak
Oru Kayak BAY ST Manuale utente
Oru Kayak
Oru Kayak INLET Manuale utente
Oru Kayak
Oru Kayak Oru Beach Manuale utente
Oru Kayak
Oru Kayak Beach LT Manuale utente
Oru Kayak
Oru Kayak COAST XT Manuale utente
Oru Kayak
Oru Kayak INLET Manuale utente
Oru Kayak
Oru Kayak The Coast Manuale utente
Oru Kayak
Oru Kayak Beach LT Manuale utente
Oru Kayak
Oru Kayak BAY ST Manuale utente
Manuali Barca popolari di altre marche
PURSUIT
PURSUIT OS 335 Manuale utente
Boston Whaler
Boston Whaler CONQUEST 345 Manuale utente
Jeanneau
Jeanneau SUN ODYSSEY 41 DS Manuale utente
Meridian
Meridian 490 Pilothouse Manuale utente
Advanced Elements
Advanced Elements AdvancedFrame Expedition AE1009 Manuale utente
Robo Marine Indonesia
Robo Marine Indonesia GEOMAR Manuale utente
