OS SEP Series Manuale utente

SE113Z24E

SEP

SET

■ Please kindly read this instruction manual carefully and use the product properly. This manual

should be kept for future reference.

Electric Screen

Index

SafetyPrecautions ・・・・・・・・・・・・2～3

Accessories ・・・・・・・・・・・・・・・・4

Aboutfabric ・・・・・・・・・・・・・・・・5

How to use ・・・・・・・・・・・・・・・・・6

Preparation of the remote controller ・・・・・・・6

How to use (IRremote) ・・・・・・・・・・・・7

How to use (Wall switch) ・・・・・・・・・・・8

How to use (Operation) ・・・・・・・・・・・8～9

Maintenance ・・・・・・・・・・・・・・・・10

FAQ ・・・・・・・・・・・・・・・・・・・10

Instruction Manual

Thank you forpurchasing OS product.

The installation of the device requires technical knowledge

and please do not installit on your own.

● Please contact the installer or the distributor for

installation.

● To installers: After installation, please hand over the

manualto the user.

SEP/

P Selection

SET/

T Selection

*Outlet plug is not included in terminal model.

SE113Z24E

This icon warns that it may cause death or casualty if not following

the instruction closely.

This icon indicates that it may cause injury or damage to the

property.

SafetyPrecautions

Please strictlycomplywith the following for safety

This instruction manual is intended to prevent any danger to the user and the third parties, or any damage to the

property. The following indicators are to remind users to strictly observe the instructions.

■ Throughout our explanation, the possible damage which may be caused by any negligence or disregard of the

safety precaution is classified to different levels according to the severity.

This icon suggests that the action is strictly prohibited.

This icon suggests that thisis the necessary procedure to follow.

Forlongperiodusagepleaseensurethattheinstallationpositioniswithadequatestrength.

If the supportis not strong enough, the screen mayfalldown after long-period use.

The installation or dismantling should only be handled by more than one professional

technician.

Assemble thescreenbytwo or more people. It might fall off causing damages andharms.

Pull out the power plug, when smoke, heat, smell or strange noise happens.

The continuoususemaycauseafireandan electricshock.

●Stop using it,andconsult with the dealer or distributor.

Take off the dust, etc. of the power plug regularly.

It cau

ses an insulation failure due to moisture etc. when dust is piled up on the power plug, and

mightcauseafire.

● Pleasepullout thepowerplug, andwipewithadrycloth.

Make sure the power plug is inserted tightly.

When insertion is not enough, it may cause afirebythe electric shock and heat..

Take the power plug to connect, not the power cable.

Itmaydamagethepowercable andcauseafireandan electricshock.

■ For the precautions we recommend users to notice, we explain by

using the following

different categories (The following

are

just example

)

SE113Z24E

Do not connect the plug to power until the installation is finished.

Itmaycauseanelectricshock.

■

OS Screenwouldnotbe responsiblefordamagecausedbyimproperinstallationornaturaldisasterfactors.

o not operate the power plug with a wet hand.

Itmaycauseanelectricshock.

Stop using, when anything

like metal, water, or liquid goes into the screen, and pull out

the power plug.

Thecontinuous usemaycause afireand anelectricshock.

●

Stop usingit,andconsult with thedealer or distributor.

Pull out the power plug, when the screenis not used for long.

The leak maycauseafire.

Donothanganyobjectstothescreen

Thismaycausedamagetothescreenandresultindanger.

Donotforciblypulloutthescreen.

This mayresult in damagetothe structureor the screen materials

Do not damage the power cable and plug.

It causes the electric shock, theshort, and a fire whenused with damage.

Donotalterthedesignordismantle

Itmaycausemajor failures.

●

Contactthedealerordistributorfor repairs

Do not touch the power plug when thundering.

Itmaycauseanelectricshock.

Withintheexpandedreachofthescreen,donotplaceanyobjectstoblockthescreenorobjectsthatareeasilybreakable.

Thismaycausedamagetothescreenortotheotherpropertiesinuse.

Donotplacesharpobjectsnearthescreen

Itmaycausedamagetothescreen

Exchange the same twonew batteries.

When an oldbatteryis mixed, it may cause heat, liquid leakageand the explosion.

Do not use the screen near thestove and other heat sources.

Becausethe screenfabriceasilygetsburned, it mightcausefire.

Restorethescreentothecaseafteruse.

Hanging the screen for longtime maycause the fabric fallout.

SE113Z24E

■

Pleaseconfirmthe accessories before installation.

・

Accessories change according to the operation methods.

Operation methods Other accessories, screws etc.

Ｒ：

Ｒ：Ｒ：

Ｒ：

Infraredremotecontrol

・

Infraredremotecontroller

×1

・Infraredreceiver ×1

・AAAdrybatteries×2

・Sticker(spare) ×1

・holder ×1

SEP(80～

～

～150 inch)

Sliding bracket

×2

Screw A

Crossrecess

Truss tapping screw

(4×40)×6

Screw B

Crossrecess

Truss tapping screw

(4×12)×4

Ｗ：

Ｗ：Ｗ：

Ｗ：

Wall switch

Wall switch ×1

Relay box ×1

Ｓ：

Ｓ：Ｓ：

Ｓ：

Set

Infraredreceiver

×1

Infraredremotecontroller Wall switch Relay box

×1 ×1 ×1

・AAA drybatteries×2

Holder ×1 ・Sticker(spare) ×1

SET(80～

～

～150inch)

Screw A

crossrecess

Truss tapping screw

(4×40)×6

※ The aluminum ceiling plate is not equipped with SET series. The SET series can be combined with

OS aluminum ceiling plate and/or the aluminum box. Please contact the dealer or the distributor for

details.

※ For the details of the accessories of the aluminum box, please refer to the installation manual of the

aluminum box.

Accessories

SE113Z24E

■Howto maintain “WG White“

The dust onthe surface should be brushed off with a soft cloth or brush.

When the dust cannot be taken off, use the soft adhesive tape to rip off, or clean with the wet cloth

(tightly

squeezed)and then with dry cloth.

This cleaningmethods are only for“WGWhite”. Do not apply the same to other surfaces.

Cautions in handling

The surface of the screen is speciallyprocessed to enhance projection image. The

contamination or damage mayresultin poorprojection image. Pay close attention to the

followings when handling this product.

Do not touch the screen surface.

Do not drawanything on the screen surface.

Do not rub or scratch the surface with anything hard.

Gentlywipe the dust off the surface with the softdrycloth or remove witha softbrush.

■ Th

e screen surface may have an odor at first. Please ventilate enough by opening the window.

Any such odor will gradually fade. When the odor is strong, please keep the screen pulled out,

evennot in use.

■ Be careful in repeating the screen going up and dow

n. The continuous use of the up and down

operations may cause the heat prevention circuitry work, and stop the screen. When this

happens, please operate after some time (15 – 20 minutes) for cooling off. (※

This is not the

breakdown.)

Neveruse a moist cloth orchemicals such as benzene, thinner etc.

It maycause the poorprojection image.

About fabric

Thescreensurfacemayhave anodoratfirst.Pleaseventilateenoughbyopeningthewindow.A

nysuchodor will

graduallyfade.

（

When the odor is strong, please keep the screen pulled out, even not in use. It might take several days till the

screendoesnot haveanodoranymore.)

Moreover, the rise of the temperature and humidity causes the odor. Ventilate it conti

nuously, when the odor is

strong in the summer time.

■Howto maintain “WF Pure Mat”

If the screen is dusty or dirty, brush away dust or dirt softly using an electrostatic brush or a fresh face

brush.

This cleaningmethods are only for“WF Pure Mat”. Do not apply the same to other surfaces.

A special processing is applied to the surface.

Do not fold or bend it in cleaning.

It mayruin the projection effects.

“WF Pure Mat” is textile fabric.

Do not rub, fold orbend it duringcleaning.

It mayruin the projection effects.

SE113Z24E

■ Operatingthe screen

Please refer to the operations in the manuals (Remote Controller S-R1 and wall switch S-R2).

■ Applyingtension to the screen

If the screen fabric is less tensionedaround the weight bar area after use, adjust the tension using the

tension adjustment mechanism.

※ Turn the knobs 3 timesclock-wise orcounter clock-wise atmaximum.

※ When tensioned too much, turn the knob counter clock-wise

to loosen the fabric. After leaving the screen for 2-3 days,

turn the knob to tighten again.

Please pull out the backpanel of the remote controller, and puttwo dry batteries

(size AAA).

Clock-wise：to tension

Counterclock-wise：toloosen

How to use

Dry batteries



Change the two batteries to the new ones

when the signalis weak.



Take out all the batteries when you do not

use it for long to avoid the liquid leakage

damage

Do not use rechargeable batteries.

The operationrange of IRremotecontroller

IRreceiver

Remote controller

Do not drop, throw away, or put water on it, or

may causethe breakdown.

Handle the remote controller carefully.



Please operate it to the direction of the infrared

receiver

Preparation of the remote controller

SE113Z24E

How to use (IR remote)

■ Storing the screen

When the screen is deployed, push theＵＰ

button of the

remote controller.

The screen is rolled up and stored, and it stops

automatically.

■ Stoppingthe screen

Pleasepush theＳＴＯＰbutton wheneveryou

want to stop

the operation.

■ Deploying the screen

Please confirm the screen is stored, and push theＤＯＷＮ

button of the remote controller. The screen is deployed to

a prescribed projection position, and it stopsautomatically.

UPbutton

(Thescreenmovesup.)

STOPbutton

(Thescreenstops.)

DOWNbutton

(Thescreenmovesdown.)

SE113Z24E

The projection position can be changed as desired.

●

●●

●

To lift up the projetion positon

①

①①

①

Stop at the desired position

UseＵＰ&ＤＯＷＮbuttons and push

ＳＴＯＰbutton at the desired position.

How to use (Wall switch)

■ Storing the screen

When the screen is deployed, push theＵＰ

button of the

wall switch.

The screen is rolled up and stored, and it stops

automatically.

■ Stoppingthe screen

Pleasepush theＳＴＯＰ

button wheneveryou want to stop

the operation.

■ Deploying the screen

Please confirm the screen is stored, and push theＤＯＷＮ

button of the wall switch

. The screen is deployed to a

prescribedprojection position, and it stops automatically.

ＵＰ button

(Thescreenmovesup.)

ＳＴＯＰ button

(Thescreenstops.)

ＤＯＷＮ button

(Thescreenmovesdown.)

How to use (Operation)

SE113Z24E

②

②②

②

Memorizing the position

1. At the desired position, pushＳＴＯＰbutton

for5-6 seconds, and then push

ＤＯＷＮbutton within 2 seconds.

2. Upon receivingthe command, the screen

moves up approx. 10cm, and then

stops atthe preset position.

●

●●

●

To lift down the projection position

①

①①

①

Deploythe screen

Push ＤＯＷＮ button for5-6 seconds

and the screen starts to come down from

the preset position.

Push ＳＴＯＰbutton.

②

②②

②

Stop at the desired position

Use

ＵＰ&

ＤＯＷＮbuttonsand push

ＳＴＯＰ

button at the desired position.

③

③③

③

Memorizing the position

1. At the desired position, pushＳＴＯＰbutton

for5-6 seconds, and then push

ＤＯＷＮbutton within 2 seconds

2. Upon receivingthe command,the screen

movesup approx. 10cm,and then

stops atthe preset position.

※

NOTICE

If the ＤＯＷＮbutton is pushed for some

time and leftas it is, the screen comes to

the factorydefaultposition, and stops.

The screen cannotbe lower than this

position.

SE113Z24E

● The replacement of the fabric

・When the screen fabric is damaged, the fabric can be replaced.

・For details, please contact the dealer or distributor.

・For details on replacing the fabric, please refer to the attached manual of the replacement

fabric.

Symptom Check Remedy

The projected image

becomes inclined. Is the screen mounted

horizontally? Check the mounting holes.

Is powerplugfixedto the mains

correctly? Fixthe plugtightly.

Is the remote controllerdirected

to the receiver? Direct the remote controller to the

receiver.

Anything blockingbetween the

remote and receiver? Take off the blockingitem, or

change the receiver position.

Is the sun or lightsreflected on

the receiver? Change the position of the receiver.

Batteriesof remote low? Change the two batteries in the

remote.(AAA type)

Is the heat prevention circuitry

on? Cool off the motor and operate

again after 10-20 minutes.

Is the receiver cable extended?

If the receiver cableisextended, it

is easily affected by the noises.

Anymodifications on the productor

the accessories would be subject to

non-warranty.

The screen does not work.

Is wrongstop position defined? Push ＤＯＷＮ button for5-6

seconds and the screen starts to

come down from the preset position.

Maintenance

FAQ

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali OS Schermo di proiezione

OS РХ-090Н Manuale utente

OS STP-HM-MRK2 Manuale utente

OS A1 Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Elite Screens

Elite Screens Elite Tripod Series Manuale utente

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

Elite Screens

Elite Screens Starling 2 Series Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente

Draper

Draper Envoy Manuale