7
PROBLEM POSSIBLE CAUSE
No Power - The power cord is disconnected.
- Poor connection at the wall socket or the wall socket is
inactive.
No Sound - Volume control at lowest level.
- Check if the signal cables are damaged.
- Check if the LEDs are blinking. If not, re start the unit and
ensure that the LED displays is in standby. If it still doesn’t work,
contact customers service.
Sudden Sound Loss - Check the audio source.
Poor Sound Quality - Audio source problem
- Bad or incorrect speakers connections.
- Treble and bass control are too low.
LED Off - Check if the unit is connected with the power outlet
SPECIFICATIONS
TROUBLE SHOOTIN G
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by OSD BLACK is under license. Other trademarks and
trade names are those of their respective owners.
Inputs: Wi-Fi®, Bluetooth®, LAN, TF, 3.5mm
Output: 3.5mm Headphone Jack, Optical
DAC: Cirrus Logic CS8406 24 Bit/192kHz DAC
Wi-Fi Frequency: 2.4 GHz
Bluetooth Version: 4.2 V/ aptX™
Dimensions: 4.5 x 4.5 x 1.18” inch
All OSD BLACK electronics have (2) year Limited Warranty against defects in materials and workmanship. Proof of purchase
must accompany all claims. During the warranty period OSD BLACK will replace any defective part and correct any defect in
workmanship without charge for either parts or labor.
OSD BLACK may replace returned electronics with a product of equal value and performance. In such cases, some
Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In
these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email
customer service at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number then the unit must
be shipped to OSD BLACK at the owner’s expense, along with a note explaining the nature of service required. Be sure to
pack the product(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in
transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation).
altered, defaced or removed. Normal wear and maintenance.
SRT1 MANUAL.indd 6-7 7/16/19 11:32 AM
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCCWARNINGS
WARRANTY
