Osram Z68 Manuale utente
Z68
Waterproof IP65 LED 8*60w Zoom Par
User manual
P
le
a
se
rea
d
t
he ins
t
r
u
ction
s
ca
refu
ll
y before use
2
TABLE OF CONTENTS
1.
S
af
ety
I
nst
r
uctions ......................................................................................3
-4
2. Technical Specifications
...........................................................................................5
3. LUX Date
.................................................................................................................... 6
4. How To Control The Unit
...................................................................................... 7-9
5
. Control Box information…………………………………………………………
9-10
6. DMX Channel List.....................................................................................11-26
7. Shape..................................................................................................................26-27
8
. Trouble shooting
......................................................................................................28
9
. Fixture Cleaning
...................................................................................................... 29
statement
The product has well capability and intact packing when leave
factory. All of the user should comply with warning item and manual, any
misuse cause of the damages are not included in our guarantee, and
also can not be responsible for any malfunction & problem owing to
ignore the manual.
3
1.
S
af
ety
I
nst
r
uctions
Please keep this User Guide for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using
the unit.
Before operating, ensure that the voltage and frequency of power
supply match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order
to avoid electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at
least 50cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while operating as
it is fire hazard.
Use safety cable when fixes this unit. DO NOT handle the unit by taking its head
only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the
temperature is higher than this Unit surface temperature may reach up to 85℃.
DO NOT touch the housing bare-hand during its operation. Turn off the power
and allow about 15 minutes for the unit to cool down before replacing or serving.
the event of serious operating problem, stop using the unit immediately.Never
try to repair the unit by yourself. Repairs carried out by unskilled people can
lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Always use the same type spare parts.
4
DO NOT touch any wire during operation as high voltage might be causing
electric shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to
rain or moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced
if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing
or attempt any repairs yourself. In the unlikely event your unit may require
service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating.
And make sure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit’s weight. Also always use a
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people.
5
2. Technical Specifications
Light Sources: 8*60W RGBW 4-in-1 LED
Beam Angle:3.5°- 40°
Power Consumption: 550w
Power Voltage: AC 100-260V, 50/60Hz
Control box weight: 2.59kgs
Single lamp holder weight: 1.88kgs
Single lamp holder with hanger weight: 2.44kg
Single lamp head size: 181x140x140mm
Control
DMX Channel: 23/28/42/50/56 Channels
Control Modes: DMX512/mater-Slave/Auto Run/Music/Manual/RDM
Construction
Data In socket: waterproof 5-pin XLR sockets(24V power + signal line)
The control box :PowerCon in/out 3-pin
Protection Rating: IP65
Features
1>LED single control
2>One control box (not waterproof) controls eight belts for focusing,which can
be connected in series at 230V, and 2 units can be connected in series at
120V.
3>A control box (not waterproof) controls eight 60W4in1 die-casting heads with
focus and waterproof, supporting point control,Can be installed separately by
hangers, can be assembled in multiple
4>Our standard DMX&Power cable with 3M ,(the cable connecting the lamp
holder to the control box)
Suggestion:The longest connection distance can reach 12M.
6
5>High-efficiency optical system ,Super beam effect plus zoom
3.Lux Date
7
4. How To Control The Unit
Display: Connection control box use
MENU To select the programming functions
DOWN To go backward in the selected functions
uP To go forward in the selected functions
ENTER To confirm the selected functions
Set DMX
Address Code
1 Press "Menu" to "Set DMX Address",and press"ENTER" keys to enter
into
2 Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"
keys to amended
3Press "ENTER"keys to save and Exit,Press the"MENU"Keys does not
save and Exit
Mic Sense
001--100
Sound sensitivity
adjustment
Language
English
Select display
language
Chinese
Fan Set
Auto
8
Menu
Select fan speed
Low
High
No Signal
Black Out
Select the state
when the
luminaire has no
signal
Hold
Reset
Yes
Reset
No
Default
Yes
Reset
No
Adjust
Pass Word：
up+down+up+do
wn
Change the value
of Pan/Tilt/Focus
to correct the
angle; change
the value of
R/G/B/W to
adjust the white
balance.
1.Red：0--255
2.Greed：0--255
3.Blue：0--255
4.White ：0--255
Address
001--512
Set the address
code from
001--512
Reverse
1.Display
1.YES 2.NO
Display font
forward and
reverse
switching
Information
1.CH Value
Show all channel
information
2.Soft V2.0
Program version
9
number
Mode
DMX512
Set control mode
Auto
1.Master
2.Alone
Sound
1.Master
2.Alone
Manual
1.Master
2.Alone
1.Focus:0--255
Manual control
2.Red：0--255
3.Greed：0--255
4.Blue：0--255
5.White：0--255
6.Strobe：0-255
Channel
1. 23Channels
23 CH
Select channel
mode
2. 28Channels
28CH
3. 42Channels
42CH
4. 50Channels
50CH
5. 56Channels
56CH
5.Control Box information
10
Indice
Altri manuali Osram Attrezzatura di illuminazione
Osram
Osram 4920Z Manuale utente
Osram
Osram Traxon e:cue Allegro Media Tube Lite Manuale utente
Osram
Osram ADB Stagelight LEXPERT PROFILE L Manuale utente
Osram
Osram BY-P09 Manuale utente
Osram
Osram Clay Paky ALPHA PROFILE 1500 Manuale utente
Osram
Osram LEDIL204 Manuale utente
Osram
Osram SubstiTUBE T5 HF Manuale utente
Osram
Osram KREIOS PAR Manuale utente
Osram
Osram SubstiTUBE T8 HF Manuale utente
Osram
Osram KREIOS SL Manuale utente
Osram
Osram LEDambient LEDINT203 Manuale utente
Osram
Osram Media Pixel Ribbon DMX Outdoor VB Manuale di istruzioni per l'installazione
Osram
Osram TW-DL-12V/110mA-Power Pack Manuale utente
Osram
Osram DALI PCU Manuale utente
Osram
Osram LEDinspect PRO SLIMLINE 280 Manuale utente
Osram
Osram ENCELIUM Manuale utente
Osram
Osram OTi50W Guida
Osram
Osram 3240G4 Manuale utente
Osram
Osram LEDinspect SLIMLINE 250 LEDIL206 Manuale utente
Osram
Osram BY-M46 Manuale utente
