Osram e:cue SYMPL e:bus Node Guida utente
AB444210035
e:cue SYMPL e:bus Node
Setup Manual / Installationsanleitung
Our Brand
www.osram.com/ecue
Light is OSRAM
02
AB444210035
e:cue SYMPL e:bus Node Setup Manual (original issue)
e:cue SYMPL e:bus Node Installationsanleitung (Originalversion)
Edition/Ausgabe: 23.08.19 [EN_DE_SYMPL_ebus_Node_Setup_v2p0]
Published by / Herausgegeben von:
OSRAM GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2019 OSRAM GmbH, BU Digital
All rights reserved / Alle Rechte vorbehalten
Read the Setup Manual
carefully before unpacking the
product. Subject to
modication without prior
notice. Typographical and other
errors do not justify any claim
for damages. All dimensions
should be veried using an
actual part.
Except for internal use,
relinquishment of the
instructions to a third party,
duplication in any type or form
- also extracts - as well as
exploitation and/or
communication of the contents
is not permitted.
Lesen Sie die
Installationsanleitung vor dem
Auspacken des Produktes
sorgfältig durch. Alle Änderungen
vorbehalten.
Rechtschreibfehler oder andere
Fehler rechtfertigen keinen
Anspruch bei Schäden. Alle
Maße sollten an einem realen
Gerät überprüft werden.
Außer für interne Verwendung ist
die Überlassung dieser Anleitung
an Dritte, die gesamte oder
auszugsweise Veröffentlichung,
Verwertung oder Mitteilung in
jeglicher Art und Form sind nicht
gestattet.
03
Table of Contents / Inhalt
Table of Contents / Inhalt
English 06
1 Security instructions 07
1.1 Symbols 07
1.2 General security instructions 07
2 General device description 08
2.1 Delivery content 08
2.2 Connectors and interfaces 09
2.3 User interface: LEDs 09
2.4 Identify button: Identication & Reset 10
3 General remarks 11
3.1 Transport 11
3.2 Unpacking 11
3.3 Warranty regulations 11
3.4 Maintenance and Repair 12
3.5 Disposal 12
3.6 Support 12
4 Installation 13
4.1 Installation conditions 13
4.2 Mounting process 13
4.3 Ethernet connection 14
4.4 e:bus connection 14
4.5 Power supply 15
5 Network configuration 15
5.1 Default network properties 16
5.2 Network conguration with SYMPHOLIGHT 16
5.3 Network conguration with the web interface 17
6 Firmware Update 18
7 Dismounting 18
04
Table of Contents / Inhalt
8 Product specifications 19
9 Certifications 20
Deutsch 21
10 Sicherheitshinweise 22
10.1 Symbole 22
10.2 Hinweise 22
11 Gerätebeschreibung 23
11.1 Lieferumfang 23
11.2 Anschlüsse und Schnittstellen 24
11.3 Benutzeroberäche: LEDs 24
11.4 Identify-Taster: Identikation & Reset 25
12 Allgemeine Hinweise 26
12.1 Transport 26
12.2 Entpacken 26
12.3 Garantiebestimmungen 26
12.4 Reparatur und Wartung 27
12.5 Entsorgung 27
12.6 Technischer Support 28
13 Installation 28
13.1 Installationsbedingungen 28
13.2 Montage 29
13.3 Ethernet-Verbindung 29
13.4 e:bus-Verbindung 30
13.5 Stromversorgung 30
14 Netzwerk-Konfiguration 31
14.1 Standardeinstellungen vom Netzwerk 31
14.2 Netzwerkeinstellung über SYMPHOLIGHT 32
14.3 Netzwerkeinstellung über die Webschnittstelle 33
15 Firmware-Update 34
16 Demontage 34
17 Produktdaten 35
05
Table of Contents / Inhalt
18 Zertifizierung 36
Dimensions / Abmessungen 37
06
English
07
Security instructions
1 Security instructions
Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
installation.
1.1 Symbols
!
The exclamation mark warns about possible damage of the
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2 General security instructions
!
Connect cables and data only when the device is powered
down.
!
The device must be supplied by a separate certied SELV
Class 2 power supply.
!
The maximum length of each connected cable is 30 m.
i
If safety instructions are missing, please contact OSRAM to
receive a new copy.
08
General device description
2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX512, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The e:cue SYMPL e:bus Node is a single channel e:bus interface for use
with e:cue’s lighting control solution SYMPHOLIGHT. It provides an e:bus
interface for up to eight e:bus devices like e:cue GLASS TOUCH terminals.
The e:cue SYMPL e:bus Node is powered by an external power supply or
via Ethernet PoE. It is easily mounted on standard 35 mm DIN rails, or with
a key hole in the housing base on walls or on any stable vertical surface.
The e:cue SYMPL e:bus Node is a simple, reliable and easy to use interface
solution for e:cue lighting control solutions with SYMPHOLIGHT.
2.1 Delivery content
Delivery content for the e:cue SYMPL e:bus Node (AB444210035):
1. e:cue SYMPL e:bus Node
2. Safety instructions
3. Installation guide (English only)
i
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
higher is mandatory. Earlier versions do not support the
SYMPL Nodes. SYMPL Nodes are not supported by the
e:cue Lighting Application Suite.
i
e:cue SYMPL e:bus Node is not hot-pluggable.
09
General device description
2.2 Connectors and interfaces
View from top
1e:bus topology:
left: free topology
right: bus topology
2e:bus interface
(– – + +, left to right)
3e:bus status LED
4Error LED
5e:net LED (Ethernet,LAN activity)
6Status LED (Device status)
7Identify button
8Power supply
(Vcc+, Vcc– left to right)
9e:net / Ethernet
2.3 User interface: LEDs
The SYMPL e:bus Node has four LEDs. The four LEDs show the basic
states of the SYMPL Node.
LEDs
Status On: If constantly on, the device is online. Server
application is in operation.
Blinking: If blinking in one second intervals, the device is
ofine, no connection to a SYMPHOLIGHT server or
Core is available. If blinking more rapidly, the device is in
bootloader mode.
10
General device description
e:net Off: no link available.
On: link established.
Blinking: e:net trafc.
Error Off: no error detected.
On: If constantly lights in red, an error occurred. This
can be an internal error or malfunction of the device, or
an external error, e.g. a shortcut of interface
connections or alien power supply. Switch the device off
and on. If the error persists, check the wiring or contact
OSRAM Service.
Status +
Error
The Status and Error LED blink simultaneously to
identify the SYMPL Node (enabled “Identify Interface
Mode” in SYMPHOLIGHT).
e:bus status Off: no e:bus activity.
On: e:bus activity.
2.4 Identify button: Identification & Reset
The Identify button has two functions: to send an Identify message (A) and
to reset the Node (B).
(A) A short press during operation in online mode sends an Identify
message to the server. This helps to assign the Node in the Layout in
SYMPHOLIGHT.
(B) The Identify button can also be used to reset the device to factory state
or to stay in bootloader mode:
• Keep the Identify button pressed while powering up, Status and
Error light up at rst. Bootloader mode is signaled by a fast blinking
Status LED. Release the button now. The device stays in bootloader
mode to download a new rmware.
To exit the bootloader mode, short press the Identify button again.
• Press the Identify button until Status and Error LEDs blink
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Osram Apparecchiature di registrazione
Osram
Osram e:cue SYMPL Switch Guida utente
Osram
Osram e:cue SYMPL Core S Guida utente
Osram
Osram e:cue SYMPL input Node Guida utente
Osram
Osram e:cue SYMPL relay Node Guida utente
Osram
Osram e:cue Bridge8 Scheda tecnica
Osram
Osram e:cue SYMPL bridge Node Scheda tecnica
Osram
Osram e:cue SYMPL dali Node Guida utente
Osram
Osram e:cue SYMPL dmx Guida utente
Manuali Apparecchiature di registrazione popolari di altre marche
Strymon
Strymon NIGHTSKY Manuale utente
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente
Tews Technologies
Tews Technologies TPMC465 Manuale utente
Honeywell
Honeywell Excel 50 Manuale utente
SeaLevel
SeaLevel COMM+8.LPCI Manuale utente
Arturia
Arturia AUDIOFUSE STUDIO Manuale utente
