oticon ConnectLine Manuale utente
INSTALLATION GUIDE
ConnectLine TV adapter
Getting started
2 3
PURPOSE OF THIS GUIDE
READ THIS FIRST
Before your hearing instruments can receive the TV sound, the adapter must
be connected to the TV and a power outlet.
This is an easy step-by-step guide through the installation of the TV adapter.
All needed parts for the installation are included in the package.
The connection parts are packed in numbered boxes from 1 to 3.
The numbers refer to each step in the installation.
4 5
TV ADAPTER OVERVIEW
TV connection
BC A
Power connection
Back
POWER INDICATOR
Light Meaning
Solid Power on
O Power o
STATUS INDICATOR
Light Meaning
Solid Connected to
Streamer and
streaming
TV sound
O Stand-by
Flashing Pairing
Front
Mic. connection
(not used)
6 7
CONNECTING TO POWER
Start by connecting the TV adapter to a power outlet.
Use the Power adapter from box no. .
- Plug the power adapter into the wall socket or another power source.
- Plug the power cord into the power connection marked A.
- Check that power is turned on and there is a solid green light in the Power indicator on
the front of the TV adapter.
8 9
CONNECTING TO TV
Connect the TV adapter to the TV. Use the TV cord from box no. .
- Connect the black plug on the TV cord to the connector marked B.
- Connect the red and white connectors to the “AUDIO OUT” terminals on the TV.
(typically marked “L - R” “AUDIO OUT” and found on the TV back or bottom panel).
B
TV cord
11
If the TV has is no “L - R” RCA Phono “OUTPUT”, an adapter should be used
for connecting the TV cord. Proceed to next page.
Otherwise go to page 16 for PAIRING.
12 13
OPTIONAL ADAPTERS FOR CONNECTING TO TV OPTION : SCART CONNECTION
The adapter are found in box no. .
(If installation completed in step 2, box no. is not used!)
SCART CONNECTION using the SCART adapter.
- Connect the Audio cord to the red and white terminals on the SCART adapter and plug it
into the TV’s SCART connection.
If you have a DVD or a Sat box connected to the SCART, you should use option instead
(Headphone connection, next page).
TV cord
SCART adapter
14 15
OPTIONAL ADAPTERS FOR CONNECTING TO TV OPTION : HEADPHONE CONNECTION
HEADPHONE CONNECTION using the Jack adapter.
-Connect the TV cord to the jack adapter and plug it into the TV’s headphone output.
The headphone output may be found on the side or front of the TV.
Notice: The TV speakers may be muted when connecting to the headphone output.
Sound will only come via TV adapter.
TV cord
Jack adapter
16 17
PREPARE STREAMER FOR TV LISTENING PAIRING
The very first time your Streamer is used with the TV adapter, the two devices must
be paired together.
PAIRING:
1. When pairing, the devices must be placed close together. Place the Streamer
right next to the TV adapter (less than cm / ft between devices).
2. Press and hold the Streamer Connect button for seconds until the blue light
starts flashing rapidly.
3. The two devices establish a connection to each other. Wait one minute.
4. After one minute the TV adapter is connected to Streamer and pairing is
complete. The orange STATUS indicator on the TV adapter lights up.
Pairing is done only once and will normally not have to be repeated.
Press sec
Less than
30 cm/ ft
TV adapter
Streamer
Unlocked
STATUS
Turns on
when ready!
18
USING THE STREAMER AND SUPPORT
Place the TV adapter in a suitable spot close to the TV. For using the Streamer with the TV
adapter, refer to the user guide.
Turn o the TV adapter
The TV adapter uses very little power so it is not necessary to turn it o .
TV sound range
TV adapter has a range of about meters depending on furnitures and placement.
Connection with SCART adapter
If you connect the TV adapter with the SCART adapter you will only hear audio from the TV
tuner with TV adapter. Audio from other sources such as DVD or VCR will not be played in
the hearing instruments. This is a limitation of the SCART connector.
For further support or tips you can check the ConnectLine information on
www.oticon.com/connectline
Altri manuali per ConnectLine
10
Indice
Altri manuali oticon Accessori TV
