BP2000
B2000
BP2000
BP2000
Starter Card
Usingtime/charging time Totalinput power
Totaloutput power
Aerialsocket (24V) output
Cigarettelighter (12V) output
DC(12V)output
Silentmode
Constantpower mode
Fastcharging mode
Slowcharging mode
Overloadprotection
USBoutput
PDoutput
ACoutput
FrequencySwitching
BatteryExpansion Made
Hightemperature protection
Lowtemperature protection
Fanstatus
Powerstatus
UPSmode
Carcharger/adapter
chargingmode
PVcharging mode
X
1.Pressand hold the power button for 3 seconds, and the LCD screen will light up to start up. Open the AC and DC switches. If there is no
operation,the screen will enter sleep mode and turn off after 30 minutes. If no keys are pressed, the device will shut down after 30 minutes.
User Guide
2.Afterthat,short perss the USB/DC/AC button to turn on the USB/DC/AC output mode.
3.Accordingto the practice of different regions and counteries, freqyebcy specifications are also different. Plaease confirm the frequency of
thisproductfirst. Press and hold the power button and AC button for 2 seconds to achieve 50Hz/60Hz frequency switching.
1.Thedevice supports hot-plugging. For safety reasons, it is recommended to plug and unplug the battery pack connectors while the device
ispowered off.
Battery Pack Connection Guide
2.Batterypack connection method: Connect the main unit to the BATTERY EXPANSIONPORT. Insert the battery pack into BATTERY
EXPANSIONPORT1. When connecting a second battery pack, insert it into BATTERYEXPANSION PORT2 while the current battery pack is
insertedinto BATTERYEXPANSION PORT1, and so on.
1.ACSocket: lnsert the AC cable plug dedicated to this product into the AC wall outlet or other generatorAC socket (Note: the output power
ofslow charging mode needs to be greater than 15A) and then plug the other end of the cable into the AC charging port of this product.
Machinecharging is automatically activated in charging mode even if the device is powered off.
Charging method
2.Solarpanels: Please make sure that the voltage of the solar panels is in the range of DC 12V-120V,and that the voltage of a single solar
panelis DC 22V-24V.Multiple solar panels can be connected in series or parallel. The maximum charging current of this product is 15A.
Themaximumcharging power of solar panels is 1000W. Please do not use solar panels with voltages exceeding DC 120V,otherwise, it may
causechargingerrors or damage to this product.
3.Carcharger: Plug the car charging cable into the XT60 charging socket, and the other end into the car cigar lighter socket. On-board DC
12V,maximum current 8A.Truck DC 24V maximum current 10A.
Before using the product, please read the user manual carefully to
ensure that you fully understand it before use. After reading, please
keep the user's manual in a safe place for future reference. If you use
this product incorrectly, you may cause serious injury to yourself or
others, as well as product damage and property damage.
Once you use this product, you can be deemed to have understood,
recognized and accepted all the terms of this manual. Users undertake
responsibility for their own actions and all the consequences that may
arise therefrom.
The Company does not assume any responsibility for any loss caused
by users' failure to use the product in accordance with the User Guide.
In order to comply with laws and regulations, The Company has the
final interpretation of this document and all related documents of this
product.
