Outback GTFX2012E Manuale utente

International Series

GTFX and GVFX

Grid-Interactive

Inverter/Charger

Installation Manual

About OutBack Power Systems

OutBack Power Systems is a leader in advanced energy conversion technology. Our products include

true sine wave inverter/chargers, maximum power point charge controllers, system communication

components, as well as breaker panels, breakers, accessories, and assembled systems.

Contact Information

Telephone: (+1) 360.435.6030 (North America)

(+34) 93.654.9568 (Barcelona, Spain)

Fax: (+1) 360.435.6019

Address: North America

19009 62nd Avenue NE

Arlington, WA USA

E-mail: Support@OutbackPower.com

Web: www.OutBackPower.com

Disclaimer

UNLESS SPECIFICALLY AGREED TO IN WRITING, OUTBACK POWER SYSTEMS:

(a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR

OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT,

CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE

USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Warranty Summary

OutBack Power Systems Inc. warrants that the products it manufactures will be free from defects in

materials and workmanship for a period of ve (5) years subject to the conditions set forth in the

warranty detail found inside the back cover of this manual.

OutBack Power Systems cannot be responsible for system failure, damages, or injury resulting from

improper installation of their products.

Notice of Copyright

International Series GTFX and GVFX Grid-Interactive Inverter/Charger Installation Manual

Trademarks

OutBack Power is a registered trademark of OutBack Power Systems.

Date and Revision

March 2010, Revision A

TABLE OF CONTENTS

The International Series GTFX and GVFX Grid-Interactive Inverter/Charger.......................................................................2

International Series GTFX and GVFX Inverter/Charger Models ....................................................................................................2

Parts Included..............................................................................................................................................................................................................2

Safety Instructions.....................................................................................................................................................................................................3

System Protection.....................................................................................................................................................................................................5

DC Wiring Origination....................................................................................................................................... .....................................................5

AC Wiring Origination.............................................................................................................................................................................................6

AC Wiring Compartment Board................................................................................................................... ....................................................6

Low Voltage Terminals............................................................................................................................................................................................7

AC and DC Grounding Requirements..........................................................................................................................................................8

FX Parts and Accessories.......................................................................................................................................................................................9

Mounting.....................................................................................................................................................................................................................10

Wire Connections...................................................................................................................................................................................................11

AC ......................................................................................................................................................................................................................11

DC ......................................................................................................................................................................................................................12

Torque Requirements................................................................................................................................................................................12

Battery Wiring Examples ....................................................................................................................................................................................13

AC Wiring Notes ......................................................................................................................................................................................................21

Low Voltage Wiring................................................................................................................................................................................................22

Inverter and On/O....................................................................................................................................................................................22

Auxiliary Output (AUX+ / AUX-)..........................................................................................................................................................23

XCT+ / XCT-................................................................................................................................................................. ....................................23

RTS, MATE/HUB Wiring........................................................................................................................................................................................24

Stacked FX Systems...............................................................................................................................................................................................25

Installation Types:

Single FX System..........................................................................................................................................................................................26

Parallel Dual FX System ............................................................................................................................................................................27

Parallel Quad FX System ..........................................................................................................................................................................28

3-Phase System............................................................................................................................................. ................................................30

Generator Auto Start............................................................................................................................................................................................33

Multiple AC Sources..............................................................................................................................................................................................34

Installation Check List..........................................................................................................................................................................................35

Specications............................................................................................................................................................................................................36

Voltage, Power, and Frequency Ranges ...................................................................................................................................................41

Current Ranges ........................................................................................................................................................................................................42

Recommended DC Breaker and Cable Sizes ........................................................................................................................................43

Maintenance..............................................................................................................................................................................................................43

FX Default Values ....................................................................................................................................................................................................45

Comparative Wire Sizes.......................................................................................................................................................................................48

Warranty.......................................................................................................................................................................................................................49

Product Registration.............................................................................................................................................................................................53

The International Series GTFX and GVFX Grid-Interactive Inverter/Charger

The International Series GTFX and GVFX Inverter/Chargers (also referred to as the FX series) oer

a complete power conversion system — DC to AC, battery charging, and an AC transfer relay —

which provide complete grid-interactive service. They can also be used in a stand-alone or back-up

application. These systems are designed for indoor or enclosed locations.

OutBack Power Systems does everything possible to assure the components you purchase will

function properly and safely when installed as instructed according to local and national electrical

codes. Please read all of the following instructions and the instructions that come with any other

OutBack components that make up your power system. Further instructions on individual FX set-ups

as well as systems assemblies are included with the FLEXware manuals.

The International Series GTFX and GVFX inverters produce an output voltage of 230 Vac per inverter.

NOTE: This product is not CE compliant for grid-interactive operations.

The International Series GTFX and GVFX Grid-Interactive Inverter/Charger Installation Manual covers the following

information:

• Safety

• FXparts,standardandoptional

• Initialinspectionofthecomponent

• Preparingthemountingsurface

• FasteningtheFXtothemountingsurface

• Generalelectricalinformation

International Series Grid-Interactive Inverter/Charger Models

Sealed Units (designed for harsher environments, but still require enclosed protection)

•GTFX2012E (12 Vdc/2000 VA)

•GTFX2024E (24 Vdc/2000 VA)

•GTFX2348ET(48Vdc/2300VA)

Vented Units (designed for protected environments)

•GVFX2612E(12Vdc/2600VA)

•GVFX3024E(24Vdc/3000VA)

•GVFX3048E(48Vdc/3000VA)

Each model FX has a single phase output marked with this symbol:

Each inverter puts out a sine wave waveform marked with this symbol:

Parts Included

•OneInternationalSeriesGTFXorGVFXInverter/Charger

•One“WARNINGELECTRICALSHOCK”stickertoplaceontheexterioroftheFX

•OnepacketofsiliconegreasetoprotectCAT5cableconnections

•Oneinstallationmanual

•Oneprogrammingmanual

•OneTurboKit(sealedunits)

•OneDCWiringCoverorDCC(ventedunits)

REA DFIR ST!

SAVE THESE INSTRUCTIONS

Read all instructions and cautionary markings on the FX, the batteries and all appropriate sections of

this installation and user manual as well as other component manuals before using the system.

Be cautious around electricity, electrical components, and batteries. Shocks, burns, injury, and even

death can occur if an installer comes in contact with electricity.

Install all components and wiring according to national and local electrical and building codes. This

includes:

• Submittingaplantothelocalbuildingdepartment

• Passinginspection

• Requiringalicensedelectriciantodotheworkwhenmandated

OutBack Power Systems cannot be responsible for system failure, damages, or injury resulting from

improper installation of their products.

Use only the recommended DC and AC wire sizes or greater. Be sure all wires are in good condition.

Install the FX in a dry location, preferably indoors.

• InstalltheFXinashadedareaoutofdirect

sunlight for best operation.

• ForinstallationswheretheFXmaybeexposedtowaterspray,asealedGTFXmustbeusedand

mounted either with the base down (shelf mounting) or with the AC wiring compartment facing

down (wall mounting).

• Ifmountedwiththebasedown,watercannotbeallowedtoaccumulatearoundtheFX’sbase.

There is a drainage system on the base of the FX to dispel condensation. If submerged, water can

enter this drain and cause failure.

• TheVentedFX(GVFX)mustbeinstalledinaweather-proofenclosureorenclosedarea.

It is not designed for exposure to water or excessive wind-blown dust and debris.

INITIAL INSPECTION

Your FX is stoutly packaged for secure shipping. Please inspect the packaging and component for

damage prior to installation.

READ FIRST!

IMPORTANT SAFETY INSTRUCTIONS

Designthebatteryenclosuretopreventaccumulationandconcentrationofhydrogengasin“pockets”

at the top of the enclosure. Vent the battery compartment from the highest point to the outside. A

sloped lid can also be used to direct the ow of hydrogen to the vent opening.

CAUTION

To reduce risk of injury, charge only deep-cycle lead acid, lead antimony, lead calcium, gel cell or

absorbed glass mat type rechargeable batteries. Other types of batteries may burst, causing personal

injury and damage. Never charge a frozen battery.

PERSONAL PRECAUTIONS

• Someoneshouldbewithinrangeofyourvoicetocometoyouraidifneeded.

• Keepplentyoffreshwaterandsoapnearbyincasebatteryacidcontactsskin,clothing,oreyes.

• Wearcompleteeyeprotection.Avoidtouchingeyeswhileworkingnearbatteries.Washyourhands

with soap and warm water when done.

• Ifbatteryacidcontactsskinorclothing,washimmediatelywithsoapandwater.Ifacidentersan

eye, ood the eye with cool running water at once for at least 15 minutes and get medical attention

immediately following.

• Bakingsodaneutralizesleadacidbatteryelectrolyte.Keepasupplyonhandintheareaofthe

batteries.

• NEVERsmokeorallowasparkorameinvicinityofabatteryorgenerator.

• Beextracautioustoreducetheriskofdroppingametaltoolontobatteries.Itcouldshort-circuitthe

batteries or other electrical parts which can result in re or explosion.

• Removepersonalmetalitemssuchasrings,bracelets,necklaces,andwatcheswhenworkingwith

a battery or other electrical current. A battery can produce a short circuit current high enough to

weld a ring or the like to metal, causing severe burns.

WARNING: EXPLOSION HAZARD. WORKING NEAR LEAD ACID BATTERIES CAN BE

DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION.

DC WIRING ORIGINATION

Unit is equipped with DC brass battery terminals with 8M x 1.00 stainless steel threaded studs.

Red terminal=battery positive Battery terminal covers

Black terminal = battery negative

SYSTEM PROTECTION

Electrical systems are designed to protect you, the wires, the components, and the devices served by

the system.

Each FX must be part of a permanently grounded

electrical system (see page 8). Grounding protects

people and equipment from electrical shock.

Grounding must be done according to local and

national electrical codes.

Circuit breakers — rated at 100% duty cycle —

protect wiring by limiting the amount of current

entering a system. All wired electrical systems

require circuit breakers or fuses for protection.

OutBack oers both breakers and fuses for over-

current protection. If they are provided by other

vendors, they must be properly rated.

AC WIRING ORIGINATION

Lexan cover protects AC Wiring

Compartment Board

AC WIRING COMPARTMENT BOARD

•AC HOT OUT supplies power to the loads.

•AC NEUTRAL OUT acts as neutral leg for loads

supplied by the FX.

•CHASSIS GROUND connections are common

and act as grounds for both the incoming and

outgoing AC circuits.

•AC NEUTRAL IN acts as the neutral leg for AC

power supplied by either the grid or a generator

to the FX.

•AC HOT IN connects incoming AC from the grid

or a generator to the FX. This AC is used to run

loads and recharge batteries.

NOTE: 13.3 mm2(6 AWG) is the largest wire

size the AC Wiring Compartment Board can

accommodate.













































AC Terminal Block--secures AC

connections to the FX using set screws

AC Wiring Board

LOW VOLTAGE TERMINALS

Control Wiring

Terminal Block

NOTE: Keep Control

Wiring Terminal Block

screws tight and the

block itself secured tightly

to AC Board. Otherwise,

the FX can malfunction.

The Terminal Block can be

unplugged for easier wire

installation and removal/

reinstallation of the FX.

AUX OUTPUT

(AUX+/AUX-): 12 Vdc

at 0.7 amps (8.4 watts)

maximum is available at

these terminals; the AUX’s

default is to drive cooling

fans or the Turbo Fan.

XCT+/XCT- are non-

operational terminals. Do

not connect anything to

them.

INVERTER ON/OFF:

allows for manual

switch to control the

FX (default operation

is“ON”);controlled

by the MATE when

the installed jumper

connecting these

terminals is present.

Jumper













































AC AND DC GROUNDING REQUIREMENTS

• Connectonlytoagrounded,permanentwiringsystem.Ensurethereisonlyoneneutral-ground

connection in the system at any time. Some codes require this connection be made at the main

panel only.

• Somegeneratorshavetheirownneutral-groundconnection.Ifageneratorisused,itsneutral-

ground connection will need to be disengaged for proper system operation.

• Forallinstallations,thenegativebatteryconductorshouldbebondedtothegroundingsystemat

one (and only one) point in the system.

• OutBackproductsarenotdesignedforuseinapositivegroundedsystem.PleasecontactOutBack

Technical Support for further information.

The equipment ground on each is marked with this symbol:

Box lug for grounding the FX chassis

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Outback Invertitore

Outback

Outback FXR2012E Manuale utente

Outback

Outback GS8048 Manuale utente

Outback

Outback ProHarvest 208V Manuale utente

Outback

Outback FX series Manuale utente

Outback

Outback FX series Manuale utente

Outback

Outback FX-Class Istruzioni operative

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente